From: "John W. Linville" <linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
To: Josh Boyer <jwboyer-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>,
Brett Rudley <brudley-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
Roland Vossen <rvossen-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Seth Forshee
<seth.forshee-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>
Subject: Re: assert_cfg80211_lock warning with Linux v3.5-8833-g2d53492
Date: Wed, 1 Aug 2012 10:18:10 -0400 [thread overview]
Message-ID: <20120801141810.GB27433@tuxdriver.com> (raw)
In-Reply-To: <20120801131232.GA1785-8k7Gwy46GHkf7BdofF/totBPR1lH4CV8@public.gmane.org>
On Wed, Aug 01, 2012 at 09:12:33AM -0400, Josh Boyer wrote:
> <snip a bunch of ALSA/input stuff>
>
> [ 21.762086] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> [ 25.698788] Bridge firewalling registered
> [ 25.746690] device virbr0-nic entered promiscuous mode
> [ 26.573028] ------------[ cut here ]------------
> [ 26.573042] WARNING: at net/wireless/core.h:125 assert_cfg80211_lock.part.8+0x15/0x17 [cfg80211]()
> [ 26.573045] Hardware name: XPS 8300
> [ 26.573046] Modules linked in: xt_CHECKSUM iptable_mangle bridge stp llc ip6t_REJECT nf_conntrack_ipv4 nf_conntrack_ipv6 nf_defrag_ipv6 nf_defrag_ipv4 xt_state nf_conntrack ib_iser rdma_cm ib_addr ip6table_filter tpm_bios ip6_tables iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel arc4 brcmsmac snd_hda_codec cordic brcmutil snd_hwdep mac80211 snd_pcm snd_page_alloc snd_timer cfg80211 snd coretemp rfkill serio_raw i2c_i801 soundcore lpc_ich bcma dcdbas microcode mfd_core mei vhost_net tun macvtap macvlan kvm_intel nfsd kvm auth_rpcgss nfs_acl lockd uinput crc32c_intel ghash_clmulni_intel broadcom tg3 usb_storage uas radeon i2c_algo_bit drm_kms_helper ttm drm i2c_core sunrpc be2iscsi bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi
libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi
> [ 26.573143] Pid: 757, comm: NetworkManager Not tainted 3.6.0-0.rc0.git8.1.fc18.x86_64 #1
> [ 26.573145] Call Trace:
> [ 26.573153] [<ffffffff8106782f>] warn_slowpath_common+0x7f/0xc0
> [ 26.573159] [<ffffffff8106788a>] warn_slowpath_null+0x1a/0x20
> [ 26.573170] [<ffffffffa04c730d>] assert_cfg80211_lock.part.8+0x15/0x17 [cfg80211]
> [ 26.573181] [<ffffffffa04a8dcb>] freq_reg_info+0x6b/0x80 [cfg80211]
brcmsmac needs to hold cfg80211_mutex before calling freq_reg_info...
It looks like those calls were added in mid-June.
> [ 26.573193] [<ffffffffa06b6c99>] brcms_c_channel_set_chanspec+0x2c9/0x350 [brcmsmac]
> [ 26.573204] [<ffffffffa06b7330>] brcms_c_set_phy_chanspec+0x30/0x70 [brcmsmac]
> [ 26.573216] [<ffffffffa06c1a45>] brcms_c_init+0xb25/0x12f0 [brcmsmac]
> [ 26.573225] [<ffffffffa047e61c>] ? bcma_host_pci_write32+0x3c/0x50 [bcma]
> [ 26.573235] [<ffffffffa06b322c>] brcms_init+0x5c/0x70 [brcmsmac]
> [ 26.573247] [<ffffffffa06bff5e>] brcms_c_up+0x23e/0x520 [brcmsmac]
> [ 26.573290] [<ffffffffa06b34a9>] brcms_up+0x29/0x30 [brcmsmac]
> [ 26.573299] [<ffffffffa06b3d0d>] brcms_ops_start+0x6d/0xe0 [brcmsmac]
> [ 26.573324] [<ffffffffa0626a01>] ieee80211_do_open+0x2e1/0x11b0 [mac80211]
> [ 26.573342] [<ffffffffa062793d>] ieee80211_open+0x6d/0x80 [mac80211]
> [ 26.573349] [<ffffffff8158fecf>] __dev_open+0x8f/0xf0
> [ 26.573357] [<ffffffff81590191>] __dev_change_flags+0xa1/0x180
> [ 26.573363] [<ffffffff81590328>] dev_change_flags+0x28/0x70
> [ 26.573371] [<ffffffff8159e278>] do_setlink+0x378/0xa00
> [ 26.573380] [<ffffffff810ac5a5>] ? sched_clock_cpu+0xc5/0x120
> [ 26.573386] [<ffffffff81021db3>] ? native_sched_clock+0x13/0x80
> [ 26.573392] [<ffffffff81359a51>] ? nla_parse+0x31/0xe0
> [ 26.573398] [<ffffffff815a09ae>] rtnl_newlink+0x37e/0x560
> [ 26.573407] [<ffffffff812d54a9>] ? selinux_capable+0x39/0x50
> [ 26.573412] [<ffffffff812d1a58>] ? security_capable+0x18/0x20
> [ 26.573418] [<ffffffff815a01d4>] rtnetlink_rcv_msg+0x114/0x2f0
> [ 26.573424] [<ffffffff8159d047>] ? rtnl_lock+0x17/0x20
> [ 26.573431] [<ffffffff8159d047>] ? rtnl_lock+0x17/0x20
> [ 26.573440] [<ffffffff815a00c0>] ? __rtnl_unlock+0x20/0x20
> [ 26.573447] [<ffffffff815bbf11>] netlink_rcv_skb+0xa1/0xb0
> [ 26.573454] [<ffffffff8159d075>] rtnetlink_rcv+0x25/0x40
> [ 26.573460] [<ffffffff815bb89d>] netlink_unicast+0x19d/0x220
> [ 26.573466] [<ffffffff815bbbfb>] netlink_sendmsg+0x2db/0x360
> [ 26.573474] [<ffffffff81576268>] ? sock_update_classid+0x148/0x2e0
> [ 26.573480] [<ffffffff8156fd7c>] sock_sendmsg+0xbc/0xf0
> [ 26.573487] [<ffffffff810ac66f>] ? local_clock+0x6f/0x80
> [ 26.573495] [<ffffffff810d5a17>] ? lock_release_non_nested+0x2f7/0x330
> [ 26.573501] [<ffffffff81570dec>] __sys_sendmsg+0x3ac/0x3c0
> [ 26.573504] [<ffffffff81021db3>] ? native_sched_clock+0x13/0x80
> [ 26.573508] [<ffffffff81021e29>] ? sched_clock+0x9/0x10
> [ 26.573511] [<ffffffff810ac5a5>] ? sched_clock_cpu+0xc5/0x120
> [ 26.573515] [<ffffffff810d05ad>] ? trace_hardirqs_off+0xd/0x10
> [ 26.573519] [<ffffffff810ac66f>] ? local_clock+0x6f/0x80
> [ 26.573523] [<ffffffff811c6939>] ? fget_light+0xf9/0x520
> [ 26.573526] [<ffffffff811c687c>] ? fget_light+0x3c/0x520
> [ 26.573530] [<ffffffff815737d9>] sys_sendmsg+0x49/0x90
> [ 26.573537] [<ffffffff816d8429>] system_call_fastpath+0x16/0x1b
> [ 26.573541] ---[ end trace 9edc8e6bb8e18f3f ]---
--
John W. Linville Someday the world will need a hero, and you
linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org might be all we have. Be ready.
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2012-08-01 14:18 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-01 13:12 assert_cfg80211_lock warning with Linux v3.5-8833-g2d53492 Josh Boyer
[not found] ` <20120801131232.GA1785-8k7Gwy46GHkf7BdofF/totBPR1lH4CV8@public.gmane.org>
2012-08-01 14:18 ` John W. Linville [this message]
[not found] ` <20120801141810.GB27433-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
2012-08-01 15:38 ` Arend van Spriel
2012-08-01 15:51 ` Arend van Spriel
2012-08-01 15:52 ` John W. Linville
[not found] ` <20120801155252.GE27433-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
2012-08-01 16:40 ` Arend van Spriel
[not found] ` <5019506C.6020707-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2012-08-01 15:53 ` Johannes Berg
2012-08-01 16:19 ` Seth Forshee
2012-08-01 17:14 ` Johannes Berg
2012-08-01 17:56 ` Seth Forshee
[not found] ` <1343836438.4638.5.camel-8upI4CBIZJIJvtFkdXX2HixXY32XiHfO@public.gmane.org>
2012-08-01 17:24 ` Arend van Spriel
[not found] ` <50196660.8090001-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2012-08-01 19:28 ` Arend van Spriel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120801141810.GB27433@tuxdriver.com \
--to=linville-2xusbdqka4r54taoqtywwq@public.gmane.org \
--cc=brudley-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
--cc=johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org \
--cc=jwboyer-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=rvossen-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
--cc=seth.forshee-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).