[net-next 0/6][pull request] Intel Wired LAN Driver Updates

[net-next 0/6][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

The following series contains updates to e1000e, if_link, ixgbe, igbvf
and igb.  This version of the series contains the following changes:

- e1000e not sure what happened in the pull on Tuesday which has this fix
  so re-posting this fix
- igb fix for timecompare_update and enable L4 timestamping
- igbvf final conversion to ndo_fix_features
- if_link/ixgbe add spoof checking feature

The following are changes since commit 7ae60b3f3b297b7f04025c93f1cb2275c3a1dfcd:
  sky2: fix skb truesize underestimation
and are available in the git repository at
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next.git

Bruce Allan (1):
  e1000e: locking bug introduced by commit 67fd4fcb

Greg Rose (2):
  if_link: Add additional parameter to IFLA_VF_INFO for spoof checking
  ixgbe: Add new netdev op to turn spoof checking on or off per VF

Jacob Keller (2):
  igb: enable l4 timestamping for v2 event packets
  igb: fix timecompare_upate race condition

Michał Mirosław (1):
  igbvf: convert to ndo_fix_features

 drivers/net/ethernet/intel/e1000e/e1000.h      |    1 +
 drivers/net/ethernet/intel/e1000e/ich8lan.c    |   21 +++++---
 drivers/net/ethernet/intel/igb/igb_main.c      |   11 ++++-
 drivers/net/ethernet/intel/igbvf/ethtool.c     |   57 ------------------------
 drivers/net/ethernet/intel/igbvf/netdev.c      |   25 ++++++++--
 drivers/net/ethernet/intel/ixgbe/ixgbe.h       |    3 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c  |   10 +++-
 drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c |   48 +++++++++++++++++---
 drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h |    1 +
 include/linux/if_link.h                        |   10 ++++
 include/linux/netdevice.h                      |    3 +
 net/core/rtnetlink.c                           |   33 ++++++++++++-
 12 files changed, 139 insertions(+), 84 deletions(-)

-- 
1.7.6.4

[net-next 0/6][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

The following series contains updates to ixgbe, igbvf and igb.
This version of the series contains the following changes:

- igb fix/add check if subordinate VFs are assigned to VM's
- igbvf fix for trunk VLAN
- ixgbe 2 fixes for ethtool and 1 endianess fix

The following are changes since commit fd38f734cb8200529e281338514945fcbff2364b:
  igbvf: convert to ndo_fix_features
and are available in the git repository at
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next.git

Emil Tantilov (3):
  ixgbe: fix endianess when writing driver version to firmware
  ixgbe: allow eeprom writes via ethtool
  ixgbe: change the eeprom version reported by ethtool

Greg Rose (2):
  igbvf: Fix trunk vlan
  igb: Check if subordinate VFs are assigned to virtual machines

Jacob Keller (1):
  ixgbe: add hardware timestamping support

 drivers/net/ethernet/intel/igb/igb.h             |    3 +
 drivers/net/ethernet/intel/igb/igb_main.c        |  176 +++++++--
 drivers/net/ethernet/intel/igbvf/netdev.c        |    4 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe.h         |   24 ++-
 drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c   |    2 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c  |   16 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c |   84 ++++-
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c    |  452 +++++++++++++++++++++-
 drivers/net/ethernet/intel/ixgbe/ixgbe_type.h    |   32 ++
 9 files changed, 742 insertions(+), 51 deletions(-)

-- 
1.7.6.4

[net-next 0/6][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

The following series contains updates to e1000e, igb and ixgbe.  5 of
the patches are bug fixes and one patch is to cleanup a function
prototype of a non-existent function.

The following are changes since commit 340e8dc1fb4032b6c8334c9bff20b2aec42ecfd8:
  atm: clip: Remove code commented out since eternity.
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Bruce Allan (1):
  e1000e: hitting BUG_ON() from napi_enable

Greg Rose (1):
  ixgbe: Remove function prototype for non-existent function

John Fastabend (2):
  ixgbe: DCBnl set_all, order of operations fix
  ixgbe: DCB: IEEE transitions may fail to reprogram hardware.

Matthew Vick (1):
  igb: Update DMA Coalescing threshold calculation.

Michael Wang (1):
  e1000e: Avoid wrong check on TX hang

 drivers/net/ethernet/intel/e1000e/e1000.h       |    1 +
 drivers/net/ethernet/intel/e1000e/netdev.c      |   27 +++++-
 drivers/net/ethernet/intel/igb/igb_main.c       |   26 +++++--
 drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c |   96 +++++++++--------------
 drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h  |    1 -
 5 files changed, 80 insertions(+), 71 deletions(-)

-- 
1.7.6.4

[net-next 0/6][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series of patches contains updates for e100, e1000e, igb and
ixgbe.  The e100 patches from Richard Cochran complete the
time stamping support for e100.

The following are changes since commit 64d683c5825003ffb3b127057a165e6bfc26691e:
  bonding: Fixup get_tx_queue() op second arg type.
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Bruce Allan (2):
  e1000e: cleanup remaining strings split across multiple lines
  e1000e: cleanup boolean logic

Carolyn Wyborny (1):
  igb: Update version to 3.4.7.

Don Skidmore (1):
  ixgbe: add I2C clock stretching

Richard Cochran (2):
  e100: Support the get_ts_info ethtool method.
  e100: enable transmit time stamping.

 drivers/net/ethernet/intel/e100.c               |    2 +
 drivers/net/ethernet/intel/e1000e/80003es2lan.c |    4 +--
 drivers/net/ethernet/intel/e1000e/82571.c       |    9 +++----
 drivers/net/ethernet/intel/e1000e/ethtool.c     |   19 +++++++---------
 drivers/net/ethernet/intel/e1000e/ich8lan.c     |   26 +++++++++++-----------
 drivers/net/ethernet/intel/e1000e/mac.c         |    2 +-
 drivers/net/ethernet/intel/e1000e/manage.c      |    2 +-
 drivers/net/ethernet/intel/e1000e/param.c       |    8 +++---
 drivers/net/ethernet/intel/e1000e/phy.c         |   23 +++++++++----------
 drivers/net/ethernet/intel/igb/igb_main.c       |    4 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c    |   20 ++++++++++++-----
 drivers/net/ethernet/intel/ixgbe/ixgbe_type.h   |    1 +
 12 files changed, 62 insertions(+), 58 deletions(-)

-- 
1.7.7.6

Re: [net-next 0/6][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Sat, 14 Apr 2012 02:16:25 -0700

> This series of patches contains updates for e100, e1000e, igb and
> ixgbe.  The e100 patches from Richard Cochran complete the
> time stamping support for e100.
> 
> The following are changes since commit 64d683c5825003ffb3b127057a165e6bfc26691e:
>   bonding: Fixup get_tx_queue() op second arg type.
> and are available in the git repository at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Also pulled, thanks a lot.

[net-next 0/6][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series of patches contains updates for e1000e, igb and
ixgbe.

The following are changes since commit 82981930125abfd39d7c8378a9cfdf5e1be2002b:
  net: cleanups in sock_setsockopt()
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Bruce Allan (2):
  e1000e: 82579 packet drop workaround
  e1000e: 82579 potential system hang on stress when ME enabled

Jacob Keller (1):
  ixgbe: check for WoL support in single function

Matthew Vick (3):
  e1000e: Disable Far-End LoopBack following reset on 80003ES2LAN.
  e1000e: Enable DMA Burst Mode on 82574 by default.
  igb: Force flow control off during reset when forcing speed.

 drivers/net/ethernet/intel/e1000e/80003es2lan.c  |    8 ++
 drivers/net/ethernet/intel/e1000e/82571.c        |    3 +-
 drivers/net/ethernet/intel/e1000e/e1000.h        |   37 +++++++++
 drivers/net/ethernet/intel/e1000e/hw.h           |   10 ---
 drivers/net/ethernet/intel/e1000e/ich8lan.c      |   11 +++
 drivers/net/ethernet/intel/e1000e/netdev.c       |   51 ++++---------
 drivers/net/ethernet/intel/igb/igb_main.c        |    7 ++
 drivers/net/ethernet/intel/ixgbe/ixgbe.h         |    2 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c |   51 +-----------
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c    |   88 ++++++++++++++--------
 10 files changed, 143 insertions(+), 125 deletions(-)

-- 
1.7.7.6

Re: [net-next 0/6][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Fri, 27 Apr 2012 02:36:47 -0700

> This series of patches contains updates for e1000e, igb and
> ixgbe.
> 
> The following are changes since commit 82981930125abfd39d7c8378a9cfdf5e1be2002b:
>   net: cleanups in sock_setsockopt()
> and are available in the git repository at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Pulled.

I super appreciate the descriptive commit messages, especialy
wrt. hardware workarounds.

Thanks.

[net-next 0/6][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to e1000 and ixgbe.

The following are changes since commit 0450243096de90ff51c3a6c605410c5e28d79f8d:
  bonding: drop_monitor aware
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Bruce Allan (1):
  e1000e: use more informative logging macros when netdev not yet
    registered

Emil Tantilov (1):
  ixgbe: do not compile ixgbe_sysfs.c when CONFIG_IXGBE_HWMON is not
    set

Jacob Keller (3):
  ixgbe: ptp code cleanup
  ixgbe: PTP Fix hwtstamp mode settings
  ixgbe: Check PTP Rx timestamps via BPF filter

John Fastabend (1):
  ixgbe: align flow control DV macros with datasheet

 drivers/net/ethernet/intel/e1000e/netdev.c     |   11 +-
 drivers/net/ethernet/intel/e1000e/param.c      |   43 ++++---
 drivers/net/ethernet/intel/ixgbe/Makefile      |    4 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe.h       |    2 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c  |   11 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c   |  149 ++++++++++++++++++------
 drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c |    2 -
 drivers/net/ethernet/intel/ixgbe/ixgbe_type.h  |   37 +++---
 8 files changed, 180 insertions(+), 79 deletions(-)

-- 
1.7.10.2

Re: [net-next 0/6][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Thu, 14 Jun 2012 03:18:03 -0700

> This series contains updates to e1000 and ixgbe.
> 
> The following are changes since commit 0450243096de90ff51c3a6c605410c5e28d79f8d:
>   bonding: drop_monitor aware
> and are available in the git repository at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Pulled, thanks Jeff.

[net-next 0/6][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to ixgbe & ixgbevf.

The following are changes since commit 5abf7f7e0f6bdbfcac737f636497d7016d9507eb:
  ipv4: fix rcu splat
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Alexander Duyck (6):
  ixgbe: Ping the VFs on link status change to trigger link change
  ixgbe: Handle failures in the ixgbe_setup_rx/tx_resources calls
  ixgbe: Move configuration of set_real_num_rx/tx_queues into open
  ixgbe: Update the logic for ixgbe_cache_ring_dcb and DCB RSS
    configuration
  ixgbe: Cleanup logic for MRQC and MTQC configuration
  ixgbevf: Update descriptor macros to accept pointers and drop _ADV
    suffix

 drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c      |  138 ++++++---------
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c     |  190 +++++++++++++--------
 drivers/net/ethernet/intel/ixgbevf/ixgbevf.h      |   12 +-
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c |   18 +-
 4 files changed, 183 insertions(+), 175 deletions(-)

-- 
1.7.10.4

Re: [net-next 0/6][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Tue, 17 Jul 2012 19:20:39 -0700

> This series contains updates to ixgbe & ixgbevf.
> 
> The following are changes since commit 5abf7f7e0f6bdbfcac737f636497d7016d9507eb:
>   ipv4: fix rcu splat
> and are available in the git repository at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Pulled, thanks Jeff.

[net-next 0/6][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to ethtool, e1000, e1000e and igb with
regards to the new MDI ethtool support patches submitted earlier.

The following are changes since commit fa0afcd10951afad2022dda09777d2bf70cdab3d:
  atl1c: fix issue of io access mode for AR8152 v2.1
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Bruce W Allan (1):
  e1000e: implement 82577/579 MDI setting support

Jesse Brandeburg (5):
  ethtool.h: MDI setting support
  igb: implement 580 MDI setting support
  e1000: configure and read MDI settings
  e1000e: implement MDI/MDI-X control
  igb: update to allow reading/setting MDI state

 drivers/net/ethernet/intel/e1000/e1000_ethtool.c |   34 +++++++++++++++++++
 drivers/net/ethernet/intel/e1000/e1000_main.c    |    4 +++
 drivers/net/ethernet/intel/e1000e/ethtool.c      |   39 +++++++++++++++++++---
 drivers/net/ethernet/intel/e1000e/phy.c          |   31 +++++++++++++++--
 drivers/net/ethernet/intel/igb/e1000_phy.c       |   29 ++++++++++++++--
 drivers/net/ethernet/intel/igb/e1000_phy.h       |    5 +--
 drivers/net/ethernet/intel/igb/igb_ethtool.c     |   37 ++++++++++++++++++++
 drivers/net/ethernet/intel/igb/igb_main.c        |    4 +++
 include/linux/ethtool.h                          |   17 ++++++----
 9 files changed, 184 insertions(+), 16 deletions(-)

-- 
1.7.10.4

Re: [net-next 0/6][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

[-- Attachment #1: Type: text/plain, Size: 1709 bytes --]

On Fri, 2012-07-20 at 14:43 -0700, Kirsher, Jeffrey T wrote:
> This series contains updates to ethtool, e1000, e1000e and igb with
> regards to the new MDI ethtool support patches submitted earlier.
> 
> The following are changes since commit fa0afcd10951afad2022dda09777d2bf70cdab3d:
>   atl1c: fix issue of io access mode for AR8152 v2.1
> and are available in the git repository at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master
> 
> Bruce W Allan (1):
>   e1000e: implement 82577/579 MDI setting support
> 
> Jesse Brandeburg (5):
>   ethtool.h: MDI setting support
>   igb: implement 580 MDI setting support
>   e1000: configure and read MDI settings
>   e1000e: implement MDI/MDI-X control
>   igb: update to allow reading/setting MDI state
> 
>  drivers/net/ethernet/intel/e1000/e1000_ethtool.c |   34 +++++++++++++++++++
>  drivers/net/ethernet/intel/e1000/e1000_main.c    |    4 +++
>  drivers/net/ethernet/intel/e1000e/ethtool.c      |   39 +++++++++++++++++++---
>  drivers/net/ethernet/intel/e1000e/phy.c          |   31 +++++++++++++++--
>  drivers/net/ethernet/intel/igb/e1000_phy.c       |   29 ++++++++++++++--
>  drivers/net/ethernet/intel/igb/e1000_phy.h       |    5 +--
>  drivers/net/ethernet/intel/igb/igb_ethtool.c     |   37 ++++++++++++++++++++
>  drivers/net/ethernet/intel/igb/igb_main.c        |    4 +++
>  include/linux/ethtool.h                          |   17 ++++++----
>  9 files changed, 184 insertions(+), 16 deletions(-)
> 
> --
> 1.7.10.4
> 

Since there some changes that are needed in this patch set, I will drop
this series from my tree so that I can continue pushing additional
ixgbe/ixgbevf patches.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[net-next 0/6][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to ethtool.h, e1000, e1000e, and igb to
implement MDI/MDIx control.

The following are changes since commit 1d76efe1577b4323609b1bcbfafa8b731eda071a:
  team: add support for non-ethernet devices
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Bruce W Allan (1):
  e1000e: implement 82577/579 MDI setting support

Jesse Brandeburg (5):
  ethtool.h: MDI setting support
  igb: implement 580 MDI setting support
  e1000: configure and read MDI settings
  e1000e: implement MDI/MDI-X control
  igb: update to allow reading/setting MDI state

 drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 39 ++++++++++++++++++++++
 drivers/net/ethernet/intel/e1000/e1000_main.c    |  4 +++
 drivers/net/ethernet/intel/e1000e/ethtool.c      | 41 +++++++++++++++++++++--
 drivers/net/ethernet/intel/e1000e/phy.c          | 31 +++++++++++++++--
 drivers/net/ethernet/intel/igb/e1000_phy.c       | 29 ++++++++++++++--
 drivers/net/ethernet/intel/igb/e1000_phy.h       |  5 +--
 drivers/net/ethernet/intel/igb/igb_ethtool.c     | 42 ++++++++++++++++++++++++
 drivers/net/ethernet/intel/igb/igb_main.c        |  4 +++
 include/linux/ethtool.h                          | 17 ++++++----
 9 files changed, 198 insertions(+), 14 deletions(-)

-- 
1.7.11.4

[net-next 1/6] ethtool.h: MDI setting support

[Jeff Kirsher]

From: Jesse Brandeburg <jesse.brandeburg@intel.com>

This change modifies the core ethtool struct to allow a driver to
support setting of MDI/MDI-X state for twisted pair wiring.  This
change uses a previously reserved u8 and should not change any
binary compatibility of ethtool.

Also as per Ben Hutchings' suggestion, the capabilities are
stored in a separate byte so the driver can report if it supports
changing settings.

see thread: http://kerneltrap.org/mailarchive/linux-netdev/2010/11/17/6289820/thread

see ethtool patches titled:
ethtool: allow setting MDI-X state

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
Tested-by: Aaron Brown aaron.f.brown@intel.com
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 include/linux/ethtool.h | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 21eff41..fcb4f8e 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -45,8 +45,10 @@ struct ethtool_cmd {
 				 * bits) in Mbps. Please use
 				 * ethtool_cmd_speed()/_set() to
 				 * access it */
-	__u8	eth_tp_mdix;
-	__u8	reserved2;
+	__u8	eth_tp_mdix;	/* twisted pair MDI-X status */
+	__u8    eth_tp_mdix_ctrl; /* twisted pair MDI-X control, when set,
+				   * link should be renegotiated if necessary
+				   */
 	__u32	lp_advertising;	/* Features the link partner advertises */
 	__u32	reserved[2];
 };
@@ -1229,10 +1231,13 @@ struct ethtool_ops {
 #define AUTONEG_DISABLE		0x00
 #define AUTONEG_ENABLE		0x01
 
-/* Mode MDI or MDI-X */
-#define ETH_TP_MDI_INVALID	0x00
-#define ETH_TP_MDI		0x01
-#define ETH_TP_MDI_X		0x02
+/* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then
+ * the driver is required to renegotiate link
+ */
+#define ETH_TP_MDI_INVALID	0x00 /* status: unknown; control: unsupported */
+#define ETH_TP_MDI		0x01 /* status: MDI;     control: force MDI */
+#define ETH_TP_MDI_X		0x02 /* status: MDI-X;   control: force MDI-X */
+#define ETH_TP_MDI_AUTO		0x03 /*                  control: auto-select */
 
 /* Wake-On-Lan options. */
 #define WAKE_PHY		(1 << 0)
-- 
1.7.11.4

[net-next 2/6] e1000e: implement 82577/579 MDI setting support

[Jeff Kirsher]

From: Bruce W Allan <bruce.w.allan@intel.com>

In order for e1000e to support MDI setting support via
ethtool this code is needed to allow setting the MDI state
via software.

This is in regards to the related ethtool patch and
fixes bugzilla.kernel.org bug 11998

Signed-off-by: Bruce W Allan <bruce.w.allan@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Aaron Brown aaron.f.brown@intel.com
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/phy.c | 31 +++++++++++++++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index b860d4f..fc62a3f 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -84,8 +84,9 @@ static const u16 e1000_igp_2_cable_length_table[] = {
 #define I82577_PHY_STATUS2_SPEED_1000MBPS 0x0200
 
 /* I82577 PHY Control 2 */
-#define I82577_PHY_CTRL2_AUTO_MDIX        0x0400
-#define I82577_PHY_CTRL2_FORCE_MDI_MDIX   0x0200
+#define I82577_PHY_CTRL2_MANUAL_MDIX      0x0200
+#define I82577_PHY_CTRL2_AUTO_MDI_MDIX    0x0400
+#define I82577_PHY_CTRL2_MDIX_CFG_MASK    0x0600
 
 /* I82577 PHY Diagnostics Status */
 #define I82577_DSTATUS_CABLE_LENGTH       0x03FC
@@ -702,6 +703,32 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
+	/* Set MDI/MDIX mode */
+	ret_val = e1e_rphy(hw, I82577_PHY_CTRL_2, &phy_data);
+	if (ret_val)
+		return ret_val;
+	phy_data &= ~I82577_PHY_CTRL2_MDIX_CFG_MASK;
+	/*
+	 * Options:
+	 *   0 - Auto (default)
+	 *   1 - MDI mode
+	 *   2 - MDI-X mode
+	 */
+	switch (hw->phy.mdix) {
+	case 1:
+		break;
+	case 2:
+		phy_data |= I82577_PHY_CTRL2_MANUAL_MDIX;
+		break;
+	case 0:
+	default:
+		phy_data |= I82577_PHY_CTRL2_AUTO_MDI_MDIX;
+		break;
+	}
+	ret_val = e1e_wphy(hw, I82577_PHY_CTRL_2, phy_data);
+	if (ret_val)
+		return ret_val;
+
 	return e1000_set_master_slave_mode(hw);
 }
 
-- 
1.7.11.4

[net-next 3/6] igb: implement 580 MDI setting support

[Jeff Kirsher]

From: Jesse Brandeburg <jesse.brandeburg@intel.com>

In order for igb to support MDI setting support via
ethtool this code is needed to allow setting the MDI state
via software.

This is in regards to the related ethtool patch

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Aaron Brown aaron.f.brown@intel.com
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/e1000_phy.c | 29 +++++++++++++++++++++++++++--
 drivers/net/ethernet/intel/igb/e1000_phy.h |  5 +++--
 2 files changed, 30 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c
index 7be98b6..3404bc7 100644
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
@@ -464,6 +464,32 @@ s32 igb_copper_link_setup_82580(struct e1000_hw *hw)
 	phy_data |= I82580_CFG_ENABLE_DOWNSHIFT;
 
 	ret_val = phy->ops.write_reg(hw, I82580_CFG_REG, phy_data);
+	if (ret_val)
+		goto out;
+
+	/* Set MDI/MDIX mode */
+	ret_val = phy->ops.read_reg(hw, I82580_PHY_CTRL_2, &phy_data);
+	if (ret_val)
+		goto out;
+	phy_data &= ~I82580_PHY_CTRL2_MDIX_CFG_MASK;
+	/*
+	 * Options:
+	 *   0 - Auto (default)
+	 *   1 - MDI mode
+	 *   2 - MDI-X mode
+	 */
+	switch (hw->phy.mdix) {
+	case 1:
+		break;
+	case 2:
+		phy_data |= I82580_PHY_CTRL2_MANUAL_MDIX;
+		break;
+	case 0:
+	default:
+		phy_data |= I82580_PHY_CTRL2_AUTO_MDI_MDIX;
+		break;
+	}
+	ret_val = hw->phy.ops.write_reg(hw, I82580_PHY_CTRL_2, phy_data);
 
 out:
 	return ret_val;
@@ -2246,8 +2272,7 @@ s32 igb_phy_force_speed_duplex_82580(struct e1000_hw *hw)
 	if (ret_val)
 		goto out;
 
-	phy_data &= ~I82580_PHY_CTRL2_AUTO_MDIX;
-	phy_data &= ~I82580_PHY_CTRL2_FORCE_MDI_MDIX;
+	phy_data &= ~I82580_PHY_CTRL2_MDIX_CFG_MASK;
 
 	ret_val = phy->ops.write_reg(hw, I82580_PHY_CTRL_2, phy_data);
 	if (ret_val)
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.h b/drivers/net/ethernet/intel/igb/e1000_phy.h
index 34e4061..6ac3299 100644
--- a/drivers/net/ethernet/intel/igb/e1000_phy.h
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.h
@@ -111,8 +111,9 @@ s32  igb_check_polarity_m88(struct e1000_hw *hw);
 #define I82580_PHY_STATUS2_SPEED_100MBPS  0x0100
 
 /* I82580 PHY Control 2 */
-#define I82580_PHY_CTRL2_AUTO_MDIX        0x0400
-#define I82580_PHY_CTRL2_FORCE_MDI_MDIX   0x0200
+#define I82580_PHY_CTRL2_MANUAL_MDIX      0x0200
+#define I82580_PHY_CTRL2_AUTO_MDI_MDIX    0x0400
+#define I82580_PHY_CTRL2_MDIX_CFG_MASK    0x0600
 
 /* I82580 PHY Diagnostics Status */
 #define I82580_DSTATUS_CABLE_LENGTH       0x03FC
-- 
1.7.11.4

[net-next 4/6] e1000: configure and read MDI settings

[Jeff Kirsher]

From: Jesse Brandeburg <jesse.brandeburg@intel.com>

This is the implementation in e1000 to allow ethtool to force
MDI state, allowing users to work around some improperly
behaving switches.

Forcing in this driver is for now only allowed when auto-neg is enabled.

To use must have the matching version of ethtool app that supports
this functionality.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Tushar Dave <tushar.n.dave@intel.com>
Tested-by: Aaron Brown aaron.f.brown@intel.com
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 39 ++++++++++++++++++++++++
 drivers/net/ethernet/intel/e1000/e1000_main.c    |  4 +++
 2 files changed, 43 insertions(+)

diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
index 736a7d9..9089d00 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
@@ -174,6 +174,20 @@ static int e1000_get_settings(struct net_device *netdev,
 
 	ecmd->autoneg = ((hw->media_type == e1000_media_type_fiber) ||
 			 hw->autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+
+	/* MDI-X => 1; MDI => 0 */
+	if ((hw->media_type == e1000_media_type_copper) &&
+	    netif_carrier_ok(netdev))
+		ecmd->eth_tp_mdix = (!!adapter->phy_info.mdix_mode ?
+							ETH_TP_MDI_X :
+							ETH_TP_MDI);
+	else
+		ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
+
+	if (hw->mdix == AUTO_ALL_MODES)
+		ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO;
+	else
+		ecmd->eth_tp_mdix_ctrl = hw->mdix;
 	return 0;
 }
 
@@ -183,6 +197,22 @@ static int e1000_set_settings(struct net_device *netdev,
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 
+	/*
+	 * MDI setting is only allowed when autoneg enabled because
+	 * some hardware doesn't allow MDI setting when speed or
+	 * duplex is forced.
+	 */
+	if (ecmd->eth_tp_mdix_ctrl) {
+		if (hw->media_type != e1000_media_type_copper)
+			return -EOPNOTSUPP;
+
+		if ((ecmd->eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) &&
+		    (ecmd->autoneg != AUTONEG_ENABLE)) {
+			e_err(drv, "forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n");
+			return -EINVAL;
+		}
+	}
+
 	while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
 		msleep(1);
 
@@ -199,12 +229,21 @@ static int e1000_set_settings(struct net_device *netdev,
 		ecmd->advertising = hw->autoneg_advertised;
 	} else {
 		u32 speed = ethtool_cmd_speed(ecmd);
+		/* calling this overrides forced MDI setting */
 		if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) {
 			clear_bit(__E1000_RESETTING, &adapter->flags);
 			return -EINVAL;
 		}
 	}
 
+	/* MDI-X => 2; MDI => 1; Auto => 3 */
+	if (ecmd->eth_tp_mdix_ctrl) {
+		if (ecmd->eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO)
+			hw->mdix = AUTO_ALL_MODES;
+		else
+			hw->mdix = ecmd->eth_tp_mdix_ctrl;
+	}
+
 	/* reset the link */
 
 	if (netif_running(adapter->netdev)) {
diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index 3bfbb8d..0ae2fcf 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -4939,6 +4939,10 @@ int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
 	default:
 		goto err_inval;
 	}
+
+	/* clear MDI, MDI(-X) override is only allowed when autoneg enabled */
+	hw->mdix = AUTO_ALL_MODES;
+
 	return 0;
 
 err_inval:
-- 
1.7.11.4

[net-next 5/6] e1000e: implement MDI/MDI-X control

[Jeff Kirsher]

From: Jesse Brandeburg <jesse.brandeburg@intel.com>

Some users report issues with link failing when connected to certain
switches.  This gives the user the ability to control the MDI state
from the driver, allowing users to work around some improperly
behaving switches.

Forcing in this driver is for now only allowed when auto-neg is
enabled.

This is in regards to the related ethtool app patch and
bugzilla.kernel.org bug 11998

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: bruce.w.allan@intel.com
CC: n.poppelier@xs4all.nl
CC: bastien@durel.org
CC: jsveiga@it.eng.br
Tested-by: Aaron Brown aaron.f.brown@intel.com
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/ethtool.c | 41 +++++++++++++++++++++++++++--
 1 file changed, 39 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index 0349e24..2e76f06 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -199,6 +199,11 @@ static int e1000_get_settings(struct net_device *netdev,
 	else
 		ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
 
+	if (hw->phy.mdix == AUTO_ALL_MODES)
+		ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO;
+	else
+		ecmd->eth_tp_mdix_ctrl = hw->phy.mdix;
+
 	return 0;
 }
 
@@ -241,6 +246,10 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
 	default:
 		goto err_inval;
 	}
+
+	/* clear MDI, MDI(-X) override is only allowed when autoneg enabled */
+	adapter->hw.phy.mdix = AUTO_ALL_MODES;
+
 	return 0;
 
 err_inval:
@@ -264,6 +273,22 @@ static int e1000_set_settings(struct net_device *netdev,
 		return -EINVAL;
 	}
 
+	/*
+	 * MDI setting is only allowed when autoneg enabled because
+	 * some hardware doesn't allow MDI setting when speed or
+	 * duplex is forced.
+	 */
+	if (ecmd->eth_tp_mdix_ctrl) {
+		if (hw->phy.media_type != e1000_media_type_copper)
+			return -EOPNOTSUPP;
+
+		if ((ecmd->eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) &&
+		    (ecmd->autoneg != AUTONEG_ENABLE)) {
+			e_err("forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n");
+			return -EINVAL;
+		}
+	}
+
 	while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
 		usleep_range(1000, 2000);
 
@@ -282,20 +307,32 @@ static int e1000_set_settings(struct net_device *netdev,
 			hw->fc.requested_mode = e1000_fc_default;
 	} else {
 		u32 speed = ethtool_cmd_speed(ecmd);
+		/* calling this overrides forced MDI setting */
 		if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) {
 			clear_bit(__E1000_RESETTING, &adapter->state);
 			return -EINVAL;
 		}
 	}
 
+	/* MDI-X => 2; MDI => 1; Auto => 3 */
+	if (ecmd->eth_tp_mdix_ctrl) {
+		/*
+		 * fix up the value for auto (3 => 0) as zero is mapped
+		 * internally to auto
+		 */
+		if (ecmd->eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO)
+			hw->phy.mdix = AUTO_ALL_MODES;
+		else
+			hw->phy.mdix = ecmd->eth_tp_mdix_ctrl;
+	}
+
 	/* reset the link */
 
 	if (netif_running(adapter->netdev)) {
 		e1000e_down(adapter);
 		e1000e_up(adapter);
-	} else {
+	} else
 		e1000e_reset(adapter);
-	}
 
 	clear_bit(__E1000_RESETTING, &adapter->state);
 	return 0;
-- 
1.7.11.4

[net-next 6/6] igb: update to allow reading/setting MDI state

[Jeff Kirsher]

From: Jesse Brandeburg <jesse.brandeburg@intel.com>

This is the implementation for igb to allow forcing MDI state
via ethtool, allowing users to work around some improperly
behaving switches.

Forcing in this driver is for now only allowed when auto-neg is
enabled.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Aaron Brown aaron.f.brown@intel.com
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_ethtool.c | 42 ++++++++++++++++++++++++++++
 drivers/net/ethernet/intel/igb/igb_main.c    |  4 +++
 2 files changed, 46 insertions(+)

diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index a19c84c..cf0e9fb 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -198,6 +198,19 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 	}
 
 	ecmd->autoneg = hw->mac.autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+
+	/* MDI-X => 2; MDI =>1; Invalid =>0 */
+	if (hw->phy.media_type == e1000_media_type_copper)
+		ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X :
+						      ETH_TP_MDI;
+	else
+		ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
+
+	if (hw->phy.mdix == AUTO_ALL_MODES)
+		ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO;
+	else
+		ecmd->eth_tp_mdix_ctrl = hw->phy.mdix;
+
 	return 0;
 }
 
@@ -214,6 +227,22 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 		return -EINVAL;
 	}
 
+	/*
+	 * MDI setting is only allowed when autoneg enabled because
+	 * some hardware doesn't allow MDI setting when speed or
+	 * duplex is forced.
+	 */
+	if (ecmd->eth_tp_mdix_ctrl) {
+		if (hw->phy.media_type != e1000_media_type_copper)
+			return -EOPNOTSUPP;
+
+		if ((ecmd->eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) &&
+		    (ecmd->autoneg != AUTONEG_ENABLE)) {
+			dev_err(&adapter->pdev->dev, "forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n");
+			return -EINVAL;
+		}
+	}
+
 	while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
 		msleep(1);
 
@@ -227,12 +256,25 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 			hw->fc.requested_mode = e1000_fc_default;
 	} else {
 		u32 speed = ethtool_cmd_speed(ecmd);
+		/* calling this overrides forced MDI setting */
 		if (igb_set_spd_dplx(adapter, speed, ecmd->duplex)) {
 			clear_bit(__IGB_RESETTING, &adapter->state);
 			return -EINVAL;
 		}
 	}
 
+	/* MDI-X => 2; MDI => 1; Auto => 3 */
+	if (ecmd->eth_tp_mdix_ctrl) {
+		/*
+		 * fix up the value for auto (3 => 0) as zero is mapped
+		 * internally to auto
+		 */
+		if (ecmd->eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO)
+			hw->phy.mdix = AUTO_ALL_MODES;
+		else
+			hw->phy.mdix = ecmd->eth_tp_mdix_ctrl;
+	}
+
 	/* reset the link */
 	if (netif_running(adapter->netdev)) {
 		igb_down(adapter);
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index b7c2d50..d4f47a0 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -6676,6 +6676,10 @@ int igb_set_spd_dplx(struct igb_adapter *adapter, u32 spd, u8 dplx)
 	default:
 		goto err_inval;
 	}
+
+	/* clear MDI, MDI(-X) override is only allowed when autoneg enabled */
+	adapter->hw.phy.mdix = AUTO_ALL_MODES;
+
 	return 0;
 
 err_inval:
-- 
1.7.11.4

Re: [net-next 1/6] ethtool.h: MDI setting support

[Ben Hutchings]

On Tue, 2012-08-21 at 01:37 -0700, Jeff Kirsher wrote:
> From: Jesse Brandeburg <jesse.brandeburg@intel.com>
> 
> This change modifies the core ethtool struct to allow a driver to
> support setting of MDI/MDI-X state for twisted pair wiring.  This
> change uses a previously reserved u8 and should not change any
> binary compatibility of ethtool.
> 
> Also as per Ben Hutchings' suggestion, the capabilities are
> stored in a separate byte so the driver can report if it supports
> changing settings.
> 
> see thread: http://kerneltrap.org/mailarchive/linux-netdev/2010/11/17/6289820/thread
> 
> see ethtool patches titled:
> ethtool: allow setting MDI-X state
> 
> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
> CC: Ben Hutchings <bhutchings@solarflare.com>
> Tested-by: Aaron Brown aaron.f.brown@intel.com
> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>

> ---
>  include/linux/ethtool.h | 17 +++++++++++------
>  1 file changed, 11 insertions(+), 6 deletions(-)
> 
> diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
> index 21eff41..fcb4f8e 100644
> --- a/include/linux/ethtool.h
> +++ b/include/linux/ethtool.h
> @@ -45,8 +45,10 @@ struct ethtool_cmd {
>  				 * bits) in Mbps. Please use
>  				 * ethtool_cmd_speed()/_set() to
>  				 * access it */
> -	__u8	eth_tp_mdix;
> -	__u8	reserved2;
> +	__u8	eth_tp_mdix;	/* twisted pair MDI-X status */
> +	__u8    eth_tp_mdix_ctrl; /* twisted pair MDI-X control, when set,
> +				   * link should be renegotiated if necessary
> +				   */
>  	__u32	lp_advertising;	/* Features the link partner advertises */
>  	__u32	reserved[2];
>  };
> @@ -1229,10 +1231,13 @@ struct ethtool_ops {
>  #define AUTONEG_DISABLE		0x00
>  #define AUTONEG_ENABLE		0x01
>  
> -/* Mode MDI or MDI-X */
> -#define ETH_TP_MDI_INVALID	0x00
> -#define ETH_TP_MDI		0x01
> -#define ETH_TP_MDI_X		0x02
> +/* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then
> + * the driver is required to renegotiate link
> + */
> +#define ETH_TP_MDI_INVALID	0x00 /* status: unknown; control: unsupported */
> +#define ETH_TP_MDI		0x01 /* status: MDI;     control: force MDI */
> +#define ETH_TP_MDI_X		0x02 /* status: MDI-X;   control: force MDI-X */
> +#define ETH_TP_MDI_AUTO		0x03 /*                  control: auto-select */
>  
>  /* Wake-On-Lan options. */
>  #define WAKE_PHY		(1 << 0)

-- 
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

Re: [net-next 0/6][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Tue, 21 Aug 2012 01:37:49 -0700

> This series contains updates to ethtool.h, e1000, e1000e, and igb to
> implement MDI/MDIx control.
> 
> The following are changes since commit 1d76efe1577b4323609b1bcbfafa8b731eda071a:
>   team: add support for non-ethernet devices
> and are available in the git repository at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Pulled, thanks Jeff.

[net-next 0/6][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to igb (specifically PTP code).

The following are changes since commit f6fe569fe056388166575af1cfaed0bcbc688305:
  Revert "usbnet: drop unneeded check for NULL"
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Matthew Vick (6):
  igb: Tidy up wrapping for CONFIG_IGB_PTP.
  igb: Update PTP function names/variables and locations.
  igb: Correct PTP support query from ethtool.
  igb: Store the MAC address in the name in the PTP struct.
  igb: Prevent dropped Tx timestamps via work items and interrupts.
  igb: Add 1588 support to I210/I211.

 drivers/net/ethernet/intel/igb/e1000_defines.h |   8 +
 drivers/net/ethernet/intel/igb/e1000_regs.h    |   2 +
 drivers/net/ethernet/intel/igb/igb.h           |  29 +-
 drivers/net/ethernet/intel/igb/igb_ethtool.c   |  84 +--
 drivers/net/ethernet/intel/igb/igb_main.c      | 329 +++---------
 drivers/net/ethernet/intel/igb/igb_ptp.c       | 676 ++++++++++++++++++++-----
 6 files changed, 708 insertions(+), 420 deletions(-)

-- 
1.7.11.4

Re: [net-next 0/6][pull request] Intel Wired LAN Driver Updates

[Richard Cochran]

On Wed, Sep 05, 2012 at 04:35:00PM -0700, Jeff Kirsher wrote:
> 
> Matthew Vick (6):
>   igb: Tidy up wrapping for CONFIG_IGB_PTP.
>   igb: Update PTP function names/variables and locations.
>   igb: Correct PTP support query from ethtool.
>   igb: Store the MAC address in the name in the PTP struct.

These four still look like unnecessary churn to me, and possibly the
wrong direction WRT time stamping in the 82580.

>   igb: Prevent dropped Tx timestamps via work items and interrupts.
>   igb: Add 1588 support to I210/I211.

But these two look important, so I don't know what to say.

Sorry,
Richard

RE: [net-next 0/6][pull request] Intel Wired LAN Driver Updates

[Vick, Matthew]

> -----Original Message-----
> From: netdev-owner@vger.kernel.org [mailto:netdev-
> owner@vger.kernel.org] On Behalf Of Richard Cochran
> Sent: Thursday, September 06, 2012 1:13 AM
> To: Kirsher, Jeffrey T
> Cc: davem@davemloft.net; netdev@vger.kernel.org; gospo@redhat.com;
> sassmann@redhat.com
> Subject: Re: [net-next 0/6][pull request] Intel Wired LAN Driver
> Updates
> 
> On Wed, Sep 05, 2012 at 04:35:00PM -0700, Jeff Kirsher wrote:
> >
> > Matthew Vick (6):
> >   igb: Tidy up wrapping for CONFIG_IGB_PTP.
> >   igb: Update PTP function names/variables and locations.
> >   igb: Correct PTP support query from ethtool.
> >   igb: Store the MAC address in the name in the PTP struct.
> 
> These four still look like unnecessary churn to me, and possibly the
> wrong direction WRT time stamping in the 82580.

(I apologize for the delayed response--I was out of the office. I've read through the discussions and will respond here in the interest of brevity.)

I still fail to see how they're churn. I'm making the code make sense for what is actually supported today. I understand that, theoretically, some of this work may be reverted if/when we pull out hardware timestamping as a separate feature from the PTP support in the driver, but I don't think we should leave it general because someone someday might get around to doing something with it. It's confusing and more difficult to maintain for no benefit. It should be part of the development effort to generalize and consolidate where possible when adding a feature.

> >   igb: Prevent dropped Tx timestamps via work items and interrupts.
> >   igb: Add 1588 support to I210/I211.
> 
> But these two look important, so I don't know what to say.
> 
> Sorry,
> Richard

Those two are definitely important. :)

Cheers,
Matthew

Re: [net-next 0/6][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

[-- Attachment #1: Type: text/plain, Size: 1636 bytes --]

On Wed, 2012-09-05 at 16:35 -0700, Kirsher, Jeffrey T wrote:
> This series contains updates to igb (specifically PTP code).
> 
> The following are changes since commit f6fe569fe056388166575af1cfaed0bcbc688305:
>   Revert "usbnet: drop unneeded check for NULL"
> and are available in the git repository at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master
> 
> Matthew Vick (6):
>   igb: Tidy up wrapping for CONFIG_IGB_PTP.
>   igb: Update PTP function names/variables and locations.
>   igb: Correct PTP support query from ethtool.
>   igb: Store the MAC address in the name in the PTP struct.
>   igb: Prevent dropped Tx timestamps via work items and interrupts.
>   igb: Add 1588 support to I210/I211.
> 
>  drivers/net/ethernet/intel/igb/e1000_defines.h |   8 +
>  drivers/net/ethernet/intel/igb/e1000_regs.h    |   2 +
>  drivers/net/ethernet/intel/igb/igb.h           |  29 +-
>  drivers/net/ethernet/intel/igb/igb_ethtool.c   |  84 +--
>  drivers/net/ethernet/intel/igb/igb_main.c      | 329 +++---------
>  drivers/net/ethernet/intel/igb/igb_ptp.c       | 676 ++++++++++++++++++++-----
>  6 files changed, 708 insertions(+), 420 deletions(-)
> 
> --

Dave-
I see you have set this series to "Changes Requested" in patchworks, and
I am assuming that is from the discussion that occurred on patch 04 of
the series.  That discussion came to the conclusion that changes should
happen in the PTP core, and that the patch is fine as is currently.

If there was something else you want changed, let me/Matthew know so
that we can make the necessary changes.

Cheers,
Jeff

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [net-next 0/6][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Thu, 13 Sep 2012 14:05:59 -0700

> On Wed, 2012-09-05 at 16:35 -0700, Kirsher, Jeffrey T wrote:
>> This series contains updates to igb (specifically PTP code).
>> 
>> The following are changes since commit f6fe569fe056388166575af1cfaed0bcbc688305:
>>   Revert "usbnet: drop unneeded check for NULL"
>> and are available in the git repository at:
>>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master
>> 
>> Matthew Vick (6):
>>   igb: Tidy up wrapping for CONFIG_IGB_PTP.
>>   igb: Update PTP function names/variables and locations.
>>   igb: Correct PTP support query from ethtool.
>>   igb: Store the MAC address in the name in the PTP struct.
>>   igb: Prevent dropped Tx timestamps via work items and interrupts.
>>   igb: Add 1588 support to I210/I211.
 ...
> I see you have set this series to "Changes Requested" in patchworks, and
> I am assuming that is from the discussion that occurred on patch 04 of
> the series.  That discussion came to the conclusion that changes should
> happen in the PTP core, and that the patch is fine as is currently.
> 
> If there was something else you want changed, let me/Matthew know so
> that we can make the necessary changes.

Thanks for updating me on this, pulled and pushed out.

[net-next 0/6][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to igb, specifically the PTP code.
There have been no changes since the last pull request other than
the update to the git tree to the latest net-next.

There was discussion on patch 4 of the series which resulted in
a suggested change to the PTP core.  Once these get accepted,
Matthew Vick will continue on with the suggested changes made by
Richard Cochran, Ben Hutchings and Jacob Keller.
  
The following are changes since commit ba01dfe18241bf89b058fd8a60218b218ad2bb30:
  Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Matthew Vick (6):
  igb: Tidy up wrapping for CONFIG_IGB_PTP.
  igb: Update PTP function names/variables and locations.
  igb: Correct PTP support query from ethtool.
  igb: Store the MAC address in the name in the PTP struct.
  igb: Prevent dropped Tx timestamps via work items and interrupts.
  igb: Add 1588 support to I210/I211.

 drivers/net/ethernet/intel/igb/e1000_defines.h |   8 +
 drivers/net/ethernet/intel/igb/e1000_regs.h    |   2 +
 drivers/net/ethernet/intel/igb/igb.h           |  29 +-
 drivers/net/ethernet/intel/igb/igb_ethtool.c   |  84 +--
 drivers/net/ethernet/intel/igb/igb_main.c      | 329 +++---------
 drivers/net/ethernet/intel/igb/igb_ptp.c       | 676 ++++++++++++++++++++-----
 6 files changed, 708 insertions(+), 420 deletions(-)

-- 
1.7.11.4

Re: [net-next 0/6][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Mon, 17 Sep 2012 02:21:43 -0700

> The following are changes since commit ba01dfe18241bf89b058fd8a60218b218ad2bb30:
>   Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
> and are available in the git repository at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master
> 
> Matthew Vick (6):
>   igb: Tidy up wrapping for CONFIG_IGB_PTP.
>   igb: Update PTP function names/variables and locations.
>   igb: Correct PTP support query from ethtool.
>   igb: Store the MAC address in the name in the PTP struct.
>   igb: Prevent dropped Tx timestamps via work items and interrupts.
>   igb: Add 1588 support to I210/I211.

Pulled, thanks for fixing this up.

[net-next 0/6][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to ixgbe and ixgbevf (mainly ixgbevf).

The following are changes since commit c9d2ea96ca3bbc85264803ff6bd66eb3bbefdb77:
  netlink: Rearrange netlink_kernel_cfg to save space on 64-bit.
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Alexander Duyck (3):
  ixgbevf: Fix code for handling timeout
  ixgbevf: Add fix to VF to handle multi-descriptor buffers
  ixgbevf: Return error on failure to enable VLAN

Greg Rose (2):
  ixgbe: Do not read the spoofed packets counter when not in IOV mode
  ixgbevf: Fix AIM (Adaptive Interrupt Moderation)

Narendra K (1):
  ixgbevf - Remove unused parameter in ixgbevf_receive_skb

 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c     |  5 +-
 drivers/net/ethernet/intel/ixgbevf/ixgbevf.h      |  5 ++
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 89 +++++++++++------------
 drivers/net/ethernet/intel/ixgbevf/mbx.c          | 15 +++-
 drivers/net/ethernet/intel/ixgbevf/vf.c           | 69 ++++++++++++++----
 5 files changed, 117 insertions(+), 66 deletions(-)

-- 
1.7.11.4

Re: [net-next 0/6][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Mon, 24 Sep 2012 02:00:01 -0700

> This series contains updates to ixgbe and ixgbevf (mainly ixgbevf).
> 
> The following are changes since commit c9d2ea96ca3bbc85264803ff6bd66eb3bbefdb77:
>   netlink: Rearrange netlink_kernel_cfg to save space on 64-bit.
> and are available in the git repository at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master
> 
> Alexander Duyck (3):
>   ixgbevf: Fix code for handling timeout
>   ixgbevf: Add fix to VF to handle multi-descriptor buffers
>   ixgbevf: Return error on failure to enable VLAN
> 
> Greg Rose (2):
>   ixgbe: Do not read the spoofed packets counter when not in IOV mode
>   ixgbevf: Fix AIM (Adaptive Interrupt Moderation)
> 
> Narendra K (1):
>   ixgbevf - Remove unused parameter in ixgbevf_receive_skb

Pulled, thanks Jeff.

[net-next 0/6][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to igb, ixgbe and e1000.

The following are changes since commit 810b6d7638a288216f99bd190470d67061c8bd88:
  Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Carolyn Wyborny (3):
  igb: Remove workaround for EEE configuration on i210/I211
  igb: Add function to read i211's invm version
  igb: Fix EEPROM writes via ethtool on i210

Emil Tantilov (1):
  ixgbe: fix default setting of TXDCTL.WTHRESH

Jacob Keller (1):
  ixgbe: fix uninitialized event.type in ixgbe_ptp_check_pps_event

Maxime Bizon (1):
  e1000: fix concurrent accesses to PHY from watchdog and ethtool

 drivers/net/ethernet/intel/e1000/e1000_hw.c   | 17 ++++-
 drivers/net/ethernet/intel/igb/e1000_82575.c  | 20 +++---
 drivers/net/ethernet/intel/igb/e1000_i210.c   | 94 +++++++++++++++++++++++++++
 drivers/net/ethernet/intel/igb/e1000_i210.h   | 11 ++++
 drivers/net/ethernet/intel/igb/e1000_mac.h    |  1 +
 drivers/net/ethernet/intel/igb/e1000_nvm.c    |  1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c  | 15 +++++
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 20 ------
 drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c  |  9 +++
 9 files changed, 155 insertions(+), 33 deletions(-)

-- 
1.7.11.7

Re: [net-next 0/6][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Thu,  1 Nov 2012 03:44:21 -0700

> This series contains updates to igb, ixgbe and e1000.
> 
> The following are changes since commit 810b6d7638a288216f99bd190470d67061c8bd88:
>   Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
> and are available in the git repository at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Nothing there:

[davem@tempietto net-next]$ git pull git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master
>From git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
 * branch            master     -> FETCH_HEAD
Already up-to-date.
[davem@tempietto net-next]$ 

Now is AN EXTREMELY bad period to waste my time like this.

Re: [net-next 0/6][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

[-- Attachment #1: Type: text/plain, Size: 999 bytes --]

On Thu, 2012-11-01 at 11:16 -0400, David Miller wrote:
> From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
> Date: Thu,  1 Nov 2012 03:44:21 -0700
> 
> > This series contains updates to igb, ixgbe and e1000.
> > 
> > The following are changes since commit 810b6d7638a288216f99bd190470d67061c8bd88:
> >   Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
> > and are available in the git repository at:
> >   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master
> 
> Nothing there:
> 
> [davem@tempietto net-next]$ git pull git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master
> From git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
>  * branch            master     -> FETCH_HEAD
> Already up-to-date.
> [davem@tempietto net-next]$ 
> 
> Now is AN EXTREMELY bad period to waste my time like this.

REALLY Sorry, I forgot to push the patches up to kernel.org.  I have
pushed them up now.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [net-next 0/6][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Thu, 01 Nov 2012 13:45:15 -0700

> REALLY Sorry, I forgot to push the patches up to kernel.org.  I have
> pushed them up now.

Pulled, thanks Jeff.

[net-next 0/6][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to e1000, igb, ixgbe and ixgbevf.

Hong Zhiguo provides a fix for e1000 where tx_ring and adapter->tx_ring
are already of type "struct e1000_tx_ring" so no need to divide by
e1000_tx_ring size in the idx calculation.

Emil provides a fix for ixgbevf to remove a redundant workaround related
to header split and a fix for ixgbe to resolve an issue where the MTA table
can be cleared when the interface is reset while in promisc mode.

Todd provides a fix for igb to prevent ethtool from writing to the iNVM
in i210/i211 devices.  This issue was reported by Marek Vasut <marex@denx.de>.

Anton Blanchard provides a fix for ixgbe to reduce memory consumption
with larger page sizes, seen on PPC.

Don provides a cleanup in ixgbe to replace the IXGBE_DESC_UNUSED macro with
the inline function ixgbevf_desc_unused() to make the logic a bit more
readable.

The following are changes since commit ba4865027c11d7ac8e5a33e0624dd415caab2027:
  ipv6: remove the unnecessary statement in find_match()
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Anton Blanchard (1):
  ixgbe: Reduce memory consumption with larger page sizes

Don Skidmore (1):
  ixgbe: cleanup IXGBE_DESC_UNUSED

Emil Tantilov (2):
  ixgbevf: remove redundant workaround
  ixgbe: fix inconsistent clearing of the multicast table

Fujinaka, Todd (1):
  igb: Don't let ethtool try to write to iNVM in i210/i211

Hong Zhiguo (1):
  e1000: fix wrong queue idx calculation

 drivers/net/ethernet/intel/e1000/e1000_main.c     |  3 +--
 drivers/net/ethernet/intel/igb/igb_ethtool.c      |  4 +++-
 drivers/net/ethernet/intel/ixgbe/ixgbe.h          |  4 ++++
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c     | 15 +++++++--------
 drivers/net/ethernet/intel/ixgbevf/ixgbevf.h      | 10 +++++++---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 19 +++++--------------
 6 files changed, 27 insertions(+), 28 deletions(-)

-- 
1.8.3.1

Re: [net-next 0/6][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Fri,  1 Nov 2013 06:56:44 -0700

> This series contains updates to e1000, igb, ixgbe and ixgbevf.
> 
> Hong Zhiguo provides a fix for e1000 where tx_ring and adapter->tx_ring
> are already of type "struct e1000_tx_ring" so no need to divide by
> e1000_tx_ring size in the idx calculation.
> 
> Emil provides a fix for ixgbevf to remove a redundant workaround related
> to header split and a fix for ixgbe to resolve an issue where the MTA table
> can be cleared when the interface is reset while in promisc mode.
> 
> Todd provides a fix for igb to prevent ethtool from writing to the iNVM
> in i210/i211 devices.  This issue was reported by Marek Vasut <marex@denx.de>.
> 
> Anton Blanchard provides a fix for ixgbe to reduce memory consumption
> with larger page sizes, seen on PPC.
> 
> Don provides a cleanup in ixgbe to replace the IXGBE_DESC_UNUSED macro with
> the inline function ixgbevf_desc_unused() to make the logic a bit more
> readable.

Pulled, thanks a lot Jeff.