From: "Michael S. Tsirkin" <mst@redhat.com>
To: Vlad Yasevich <vyasevic@redhat.com>
Cc: netdev@vger.kernel.org
Subject: Re: [RFC PATCH bridge 1/5] bridge: Add vlan check to forwarding path
Date: Thu, 30 Aug 2012 15:19:24 +0300 [thread overview]
Message-ID: <20120830121924.GB20228@redhat.com> (raw)
In-Reply-To: <1345750195-31598-2-git-send-email-vyasevic@redhat.com>
On Thu, Aug 23, 2012 at 03:29:51PM -0400, Vlad Yasevich wrote:
> When forwarding packets make sure vlan matches any configured vlan for
> the port.
>
> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
> ---
> net/bridge/br_forward.c | 17 ++++++++++++++++-
> net/bridge/br_input.c | 8 ++++++++
> net/bridge/br_private.h | 2 ++
> 3 files changed, 26 insertions(+), 1 deletions(-)
>
> diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c
> index e9466d4..ab81954 100644
> --- a/net/bridge/br_forward.c
> +++ b/net/bridge/br_forward.c
> @@ -26,11 +26,26 @@ static int deliver_clone(const struct net_bridge_port *prev,
> void (*__packet_hook)(const struct net_bridge_port *p,
> struct sk_buff *skb));
>
> -/* Don't forward packets to originating port or forwarding diasabled */
> +/* check to see that the vlan is allowed to be forwarded on this interface */
> +static inline int vlan_match(const struct net_bridge_port *p,
> + const struct sk_buff *skb)
> +{
> + unsigned long *vlan_map = rcu_dereference(p->vlan_map);
> + unsigned short vid = vlan_tx_tag_get(skb) & VLAN_VID_MASK;
> +
> + /* The map keeps the vlans off by 1 so adjust for that */
> + return (vlan_map && vlan_tx_tag_present(skb) &&
> + test_bit(vid+1, vlan_map));
It looks better if you put spaces around +,* etc:
vid + 1 This applies to all patches and many places so I am not
noting it everywhere - could you fnd such instances and fix up?
Also, this off by 1 map logic is all over this patch,
one hopes we did not forget is somewhere.
Would be better to have a wrapper.
Also do not put return value in () please - it gets us nothing
at all. Again applies everywhere.
> +}
> +
> +/* Don't forward packets to originating port or forwarding diasabled.
> + */
> static inline int should_deliver(const struct net_bridge_port *p,
> const struct sk_buff *skb)
> {
> +
extra empty line - no needed here.
> return (((p->flags & BR_HAIRPIN_MODE) || skb->dev != p->dev) &&
> + vlan_match(p, skb) &&
> p->state == BR_STATE_FORWARDING);
> }
>
> diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c
> index 76f15fd..b7ca3b3 100644
> --- a/net/bridge/br_input.c
> +++ b/net/bridge/br_input.c
> @@ -53,10 +53,18 @@ int br_handle_frame_finish(struct sk_buff *skb)
> struct net_bridge_fdb_entry *dst;
> struct net_bridge_mdb_entry *mdst;
> struct sk_buff *skb2;
> + unsigned long *vlan_map;
>
> if (!p || p->state == BR_STATE_DISABLED)
> goto drop;
>
> + /* If VLAN filter is configured on the port, make sure we accept
> + * only traffic matching the VLAN filter.
> + */
> + vlan_map = rcu_dereference(p->vlan_map);
> + if (vlan_map && !test_bit((skb->vlan_tci & VLAN_VID_MASK), vlan_map))
() not needed here around parameters.
> + goto drop;
> +
> /* insert into forwarding database after filtering to avoid spoofing */
> br = p->br;
> br_fdb_update(br, p, eth_hdr(skb)->h_source);
> diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
> index a768b24..8da90e8 100644
> --- a/net/bridge/br_private.h
> +++ b/net/bridge/br_private.h
> @@ -152,6 +152,8 @@ struct net_bridge_port
> #ifdef CONFIG_NET_POLL_CONTROLLER
> struct netpoll *np;
> #endif
> + unsigned long __rcu *vlan_map;
> +
Empty line not needed.
> };
>
> #define br_port_exists(dev) (dev->priv_flags & IFF_BRIDGE_PORT)
> --
> 1.7.7.6
>
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2012-08-30 12:18 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-23 19:29 [RFC PATCH bridge 0/5] Add basic VLAN support to bridges Vlad Yasevich
2012-08-23 19:29 ` [RFC PATCH bridge 1/5] bridge: Add vlan check to forwarding path Vlad Yasevich
2012-08-23 20:58 ` Nicolas de Pesloüan
2012-08-30 12:19 ` Michael S. Tsirkin [this message]
2012-08-23 19:29 ` [RFC PATCH bridge 2/5] bridge: Add vlan to unicast fdb entries Vlad Yasevich
2012-08-23 19:39 ` Stephen Hemminger
2012-08-23 19:42 ` Vlad Yasevich
2012-08-30 14:33 ` Michael S. Tsirkin
2012-08-30 14:48 ` Vlad Yasevich
2012-08-30 15:45 ` Michael S. Tsirkin
2012-08-30 16:07 ` Vlad Yasevich
2012-08-23 19:29 ` [RFC PATCH bridge 3/5] bridge: Add vlan id to multicast groups Vlad Yasevich
2012-08-30 12:30 ` Michael S. Tsirkin
2012-08-30 12:55 ` Eric Dumazet
2012-08-23 19:29 ` [RFC PATCH bridge 4/5] bridge: Add private ioctls to configure vlans on bridge ports Vlad Yasevich
2012-08-23 19:38 ` Stephen Hemminger
2012-08-23 19:41 ` Vlad Yasevich
2012-08-24 17:56 ` Paul E. McKenney
2012-08-24 18:11 ` Stephen Hemminger
2012-08-24 18:19 ` Vlad Yasevich
2012-08-30 12:17 ` Michael S. Tsirkin
2012-08-23 19:29 ` [RFC PATCH bridge 5/5] bridge: Add sysfs interface to display VLANS Vlad Yasevich
2012-08-30 12:27 ` Michael S. Tsirkin
2012-08-30 14:05 ` Vlad Yasevich
2012-08-30 14:26 ` Michael S. Tsirkin
2012-08-30 14:36 ` Vlad Yasevich
2012-08-30 14:44 ` Michael S. Tsirkin
2012-08-30 14:51 ` Vlad Yasevich
2012-08-30 15:03 ` Michael S. Tsirkin
2012-08-30 15:07 ` Vlad Yasevich
2012-08-30 15:47 ` Michael S. Tsirkin
2012-08-30 15:52 ` Vlad Yasevich
2012-08-30 15:58 ` Michael S. Tsirkin
2012-08-23 19:41 ` [RFC PATCH bridge 0/5] Add basic VLAN support to bridges Stephen Hemminger
2012-08-23 19:53 ` Vlad Yasevich
2012-08-23 21:03 ` Nicolas de Pesloüan
2012-08-23 21:12 ` Stephen Hemminger
2012-08-24 2:52 ` Vlad Yasevich
2012-08-24 20:44 ` Stephen Hemminger
2012-08-24 21:09 ` Nicolas de Pesloüan
2012-08-30 12:37 ` Michael S. Tsirkin
2012-08-30 13:37 ` Vlad Yasevich
2012-08-30 14:34 ` Michael S. Tsirkin
2012-08-30 14:41 ` Vlad Yasevich
2012-08-30 14:46 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120830121924.GB20228@redhat.com \
--to=mst@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=vyasevic@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).