[PATCH net 1/1] bnx2x: recognize fan failure

[PATCH net 1/1] bnx2x: recognize fan failure

[Yuval Mintz]

From: Yaniv Rosner <yaniv.rosner@broadcom.com>

If fan failure is detected, MCP prevents PCI I/O registers from being
mapped to the bar, causing a fatal error as driver is unaware.

This patch recognizes such an event occurred and gracefully terminates
the probe process.

Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
Hi Dave,

This patch prevents a fatal error on newer bnx2x boards.

Please consider applying it to 'net'.
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c |    8 ++++++++
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h  |    4 +++-
 2 files changed, 11 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 01611b3..101392b 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -11346,6 +11346,14 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
 		goto err_out_disable;
 	}
 
+	pci_read_config_dword(pdev, PCICFG_REVISION_ID_OFFSET, &pci_cfg_dword);
+	if ((pci_cfg_dword & PCICFG_REVESION_ID_MASK) ==
+	    PCICFG_REVESION_ID_ERROR_VAL) {
+		pr_err("PCI device error, probably due to fan failure, aborting\n");
+		rc = -ENODEV;
+		goto err_out_disable;
+	}
+
 	if (atomic_read(&pdev->enable_cnt) == 1) {
 		rc = pci_request_regions(pdev, DRV_MODULE_NAME);
 		if (rc) {
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
index 1b1999d..698cbf7 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
@@ -6130,7 +6130,9 @@
 #define PCICFG_COMMAND_INT_DISABLE		(1<<10)
 #define PCICFG_COMMAND_RESERVED 		(0x1f<<11)
 #define PCICFG_STATUS_OFFSET				0x06
-#define PCICFG_REVESION_ID_OFFSET			0x08
+#define PCICFG_REVISION_ID_OFFSET			0x08
+#define PCICFG_REVESION_ID_MASK			0xff
+#define PCICFG_REVESION_ID_ERROR_VAL		0xff
 #define PCICFG_CACHE_LINE_SIZE				0x0c
 #define PCICFG_LATENCY_TIMER				0x0d
 #define PCICFG_BAR_1_LOW				0x10
-- 
1.7.1

Re: [PATCH net 1/1] bnx2x: recognize fan failure

[David Miller]

From: "Yuval Mintz" <yuvalmin@broadcom.com>
Date: Mon, 3 Dec 2012 11:56:49 +0200

> From: Yaniv Rosner <yaniv.rosner@broadcom.com>
> 
> If fan failure is detected, MCP prevents PCI I/O registers from being
> mapped to the bar, causing a fatal error as driver is unaware.
> 
> This patch recognizes such an event occurred and gracefully terminates
> the probe process.
> 
> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com>
> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
> Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
> ---
> Hi Dave,
> 
> This patch prevents a fatal error on newer bnx2x boards.
> 
> Please consider applying it to 'net'.

Too late, I've applied it to net-next.  I'm not asking Linus to hold back
an already delayed released for such a rarely triggering issue such as this
one.