[PATCH v2 03/10] net: smc91x: use io{read,write}*_rep accessors instead of string functions

[PATCH v2 03/10] net: smc91x: use io{read,write}*_rep accessors instead of string functions

[Will Deacon]

The {read,write}s{b,w,l} operations are not defined by all architectures
and are being removed from the asm-generic/io.h interface.

This patch replaces the usage of these string functions in the default
SMC accessors with io{read,write}{8,16,32}_rep calls instead, which are
defined for all architectures.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Will Deacon <will.deacon@arm.com>
---
 drivers/net/ethernet/smsc/smc91x.h | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h
index 5f53fbb..370e13d 100644
--- a/drivers/net/ethernet/smsc/smc91x.h
+++ b/drivers/net/ethernet/smsc/smc91x.h
@@ -286,16 +286,16 @@ static inline void mcf_outsw(void *a, unsigned char *p, int l)
 
 #define SMC_IO_SHIFT		(lp->io_shift)
 
-#define SMC_inb(a, r)		readb((a) + (r))
-#define SMC_inw(a, r)		readw((a) + (r))
-#define SMC_inl(a, r)		readl((a) + (r))
-#define SMC_outb(v, a, r)	writeb(v, (a) + (r))
-#define SMC_outw(v, a, r)	writew(v, (a) + (r))
-#define SMC_outl(v, a, r)	writel(v, (a) + (r))
-#define SMC_insw(a, r, p, l)	readsw((a) + (r), p, l)
-#define SMC_outsw(a, r, p, l)	writesw((a) + (r), p, l)
-#define SMC_insl(a, r, p, l)	readsl((a) + (r), p, l)
-#define SMC_outsl(a, r, p, l)	writesl((a) + (r), p, l)
+#define SMC_inb(a, r)		ioread8((a) + (r))
+#define SMC_inw(a, r)		ioread16((a) + (r))
+#define SMC_inl(a, r)		ioread32((a) + (r))
+#define SMC_outb(v, a, r)	iowrite8(v, (a) + (r))
+#define SMC_outw(v, a, r)	iowrite16(v, (a) + (r))
+#define SMC_outl(v, a, r)	iowrite32(v, (a) + (r))
+#define SMC_insw(a, r, p, l)	ioread16_rep((a) + (r), p, l)
+#define SMC_outsw(a, r, p, l)	iowrite16_rep((a) + (r), p, l)
+#define SMC_insl(a, r, p, l)	ioread32_rep((a) + (r), p, l)
+#define SMC_outsl(a, r, p, l)	iowrite32_rep((a) + (r), p, l)
 
 #define RPC_LSA_DEFAULT		RPC_LED_100_10
 #define RPC_LSB_DEFAULT		RPC_LED_TX_RX
-- 
1.8.0

Re: [PATCH v2 03/10] net: smc91x: use io{read,write}*_rep accessors instead of string functions

[David Miller]

From: Will Deacon <will.deacon@arm.com>
Date: Mon, 10 Dec 2012 19:12:35 +0000

> The {read,write}s{b,w,l} operations are not defined by all architectures
> and are being removed from the asm-generic/io.h interface.
> 
> This patch replaces the usage of these string functions in the default
> SMC accessors with io{read,write}{8,16,32}_rep calls instead, which are
> defined for all architectures.
> 
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
> Cc: Nicolas Pitre <nico@fluxnic.net>
> Cc: netdev@vger.kernel.org
> Signed-off-by: Will Deacon <will.deacon@arm.com>

Applied.

[PATCH v2 04/10] net: smc911x: use io{read,write}*_rep accessors

[Will Deacon]

From: Matthew Leach <matthew@mattleach.net>

The {read,write}s{b,w,l} operations are not defined by all
architectures and are being removed from the asm-generic/io.h
interface.

This patch replaces the usage of these string functions in the smc911x
accessors with io{read,write}{8,16,32}_rep calls instead.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Matthew Leach <matthew@mattleach.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
---
 drivers/net/ethernet/smsc/smc911x.h | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smc911x.h b/drivers/net/ethernet/smsc/smc911x.h
index 3269292..d51261b 100644
--- a/drivers/net/ethernet/smsc/smc911x.h
+++ b/drivers/net/ethernet/smsc/smc911x.h
@@ -159,12 +159,12 @@ static inline void SMC_insl(struct smc911x_local *lp, int reg,
 	void __iomem *ioaddr = lp->base + reg;
 
 	if (lp->cfg.flags & SMC911X_USE_32BIT) {
-		readsl(ioaddr, addr, count);
+		ioread32_rep(ioaddr, addr, count);
 		return;
 	}
 
 	if (lp->cfg.flags & SMC911X_USE_16BIT) {
-		readsw(ioaddr, addr, count * 2);
+		ioread16_rep(ioaddr, addr, count * 2);
 		return;
 	}
 
@@ -177,12 +177,12 @@ static inline void SMC_outsl(struct smc911x_local *lp, int reg,
 	void __iomem *ioaddr = lp->base + reg;
 
 	if (lp->cfg.flags & SMC911X_USE_32BIT) {
-		writesl(ioaddr, addr, count);
+		iowrite32_rep(ioaddr, addr, count);
 		return;
 	}
 
 	if (lp->cfg.flags & SMC911X_USE_16BIT) {
-		writesw(ioaddr, addr, count * 2);
+		iowrite16_rep(ioaddr, addr, count * 2);
 		return;
 	}
 
@@ -196,14 +196,14 @@ static inline void SMC_outsl(struct smc911x_local *lp, int reg,
 		 writew(v & 0xFFFF, (lp)->base + (r));	 \
 		 writew(v >> 16, (lp)->base + (r) + 2); \
 	 } while (0)
-#define SMC_insl(lp, r, p, l)	 readsw((short*)((lp)->base + (r)), p, l*2)
-#define SMC_outsl(lp, r, p, l)	 writesw((short*)((lp)->base + (r)), p, l*2)
+#define SMC_insl(lp, r, p, l)	 ioread16_rep((short*)((lp)->base + (r)), p, l*2)
+#define SMC_outsl(lp, r, p, l)	 iowrite16_rep((short*)((lp)->base + (r)), p, l*2)
 
 #elif	SMC_USE_32BIT
 #define SMC_inl(lp, r)		 readl((lp)->base + (r))
 #define SMC_outl(v, lp, r)	 writel(v, (lp)->base + (r))
-#define SMC_insl(lp, r, p, l)	 readsl((int*)((lp)->base + (r)), p, l)
-#define SMC_outsl(lp, r, p, l)	 writesl((int*)((lp)->base + (r)), p, l)
+#define SMC_insl(lp, r, p, l)	 ioread32_rep((int*)((lp)->base + (r)), p, l)
+#define SMC_outsl(lp, r, p, l)	 iowrite32_rep((int*)((lp)->base + (r)), p, l)
 
 #endif /* SMC_USE_16BIT */
 #endif /* SMC_DYNAMIC_BUS_CONFIG */
-- 
1.8.0

Re: [PATCH v2 04/10] net: smc911x: use io{read,write}*_rep accessors

[David Miller]

From: Will Deacon <will.deacon@arm.com>
Date: Mon, 10 Dec 2012 19:12:36 +0000

> From: Matthew Leach <matthew@mattleach.net>
> 
> The {read,write}s{b,w,l} operations are not defined by all
> architectures and are being removed from the asm-generic/io.h
> interface.
> 
> This patch replaces the usage of these string functions in the smc911x
> accessors with io{read,write}{8,16,32}_rep calls instead.
> 
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
> Cc: netdev@vger.kernel.org
> Signed-off-by: Matthew Leach <matthew@mattleach.net>
> Signed-off-by: Will Deacon <will.deacon@arm.com>

This misses the two uses in smsc911x_tx_writefifo and
smsc911x_rx_readfifo.

Re: [PATCH v2 04/10] net: smc911x: use io{read,write}*_rep accessors

[Will Deacon]

Hi David,

On Mon, Dec 10, 2012 at 08:47:05PM +0000, David Miller wrote:
> From: Will Deacon <will.deacon@arm.com>
> Date: Mon, 10 Dec 2012 19:12:36 +0000
> 
> > From: Matthew Leach <matthew@mattleach.net>
> > 
> > The {read,write}s{b,w,l} operations are not defined by all
> > architectures and are being removed from the asm-generic/io.h
> > interface.
> > 
> > This patch replaces the usage of these string functions in the smc911x
> > accessors with io{read,write}{8,16,32}_rep calls instead.
> > 
> > Cc: Arnd Bergmann <arnd@arndb.de>
> > Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
> > Cc: netdev@vger.kernel.org
> > Signed-off-by: Matthew Leach <matthew@mattleach.net>
> > Signed-off-by: Will Deacon <will.deacon@arm.com>
> 
> This misses the two uses in smsc911x_tx_writefifo and
> smsc911x_rx_readfifo.

Well spotted, updated patch below.

Cheers,

Will

--->8

>From b46e33465e755e945136d19938c9a8331cbafce7 Mon Sep 17 00:00:00 2001
From: Matthew Leach <matthew@mattleach.net>
Date: Tue, 6 Nov 2012 14:51:11 +0000
Subject: [PATCH v3] net: smc911x: use io{read,write}*_rep accessors

The {read,write}s{b,w,l} operations are not defined by all
architectures and are being removed from the asm-generic/io.h
interface.

This patch replaces the usage of these string functions in the smc911x
accessors with io{read,write}{8,16,32}_rep calls instead.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Matthew Leach <matthew@mattleach.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
---
 drivers/net/ethernet/smsc/smc911x.h  | 16 ++++++++--------
 drivers/net/ethernet/smsc/smsc911x.c |  8 ++++----
 2 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smc911x.h b/drivers/net/ethernet/smsc/smc911x.h
index 3269292..d51261b 100644
--- a/drivers/net/ethernet/smsc/smc911x.h
+++ b/drivers/net/ethernet/smsc/smc911x.h
@@ -159,12 +159,12 @@ static inline void SMC_insl(struct smc911x_local *lp, int reg,
 	void __iomem *ioaddr = lp->base + reg;
 
 	if (lp->cfg.flags & SMC911X_USE_32BIT) {
-		readsl(ioaddr, addr, count);
+		ioread32_rep(ioaddr, addr, count);
 		return;
 	}
 
 	if (lp->cfg.flags & SMC911X_USE_16BIT) {
-		readsw(ioaddr, addr, count * 2);
+		ioread16_rep(ioaddr, addr, count * 2);
 		return;
 	}
 
@@ -177,12 +177,12 @@ static inline void SMC_outsl(struct smc911x_local *lp, int reg,
 	void __iomem *ioaddr = lp->base + reg;
 
 	if (lp->cfg.flags & SMC911X_USE_32BIT) {
-		writesl(ioaddr, addr, count);
+		iowrite32_rep(ioaddr, addr, count);
 		return;
 	}
 
 	if (lp->cfg.flags & SMC911X_USE_16BIT) {
-		writesw(ioaddr, addr, count * 2);
+		iowrite16_rep(ioaddr, addr, count * 2);
 		return;
 	}
 
@@ -196,14 +196,14 @@ static inline void SMC_outsl(struct smc911x_local *lp, int reg,
 		 writew(v & 0xFFFF, (lp)->base + (r));	 \
 		 writew(v >> 16, (lp)->base + (r) + 2); \
 	 } while (0)
-#define SMC_insl(lp, r, p, l)	 readsw((short*)((lp)->base + (r)), p, l*2)
-#define SMC_outsl(lp, r, p, l)	 writesw((short*)((lp)->base + (r)), p, l*2)
+#define SMC_insl(lp, r, p, l)	 ioread16_rep((short*)((lp)->base + (r)), p, l*2)
+#define SMC_outsl(lp, r, p, l)	 iowrite16_rep((short*)((lp)->base + (r)), p, l*2)
 
 #elif	SMC_USE_32BIT
 #define SMC_inl(lp, r)		 readl((lp)->base + (r))
 #define SMC_outl(v, lp, r)	 writel(v, (lp)->base + (r))
-#define SMC_insl(lp, r, p, l)	 readsl((int*)((lp)->base + (r)), p, l)
-#define SMC_outsl(lp, r, p, l)	 writesl((int*)((lp)->base + (r)), p, l)
+#define SMC_insl(lp, r, p, l)	 ioread32_rep((int*)((lp)->base + (r)), p, l)
+#define SMC_outsl(lp, r, p, l)	 iowrite32_rep((int*)((lp)->base + (r)), p, l)
 
 #endif /* SMC_USE_16BIT */
 #endif /* SMC_DYNAMIC_BUS_CONFIG */
diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index c53c0f4..9d46167 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -253,7 +253,7 @@ smsc911x_tx_writefifo(struct smsc911x_data *pdata, unsigned int *buf,
 	}
 
 	if (pdata->config.flags & SMSC911X_USE_32BIT) {
-		writesl(pdata->ioaddr + TX_DATA_FIFO, buf, wordcount);
+		iowrite32_rep(pdata->ioaddr + TX_DATA_FIFO, buf, wordcount);
 		goto out;
 	}
 
@@ -285,7 +285,7 @@ smsc911x_tx_writefifo_shift(struct smsc911x_data *pdata, unsigned int *buf,
 	}
 
 	if (pdata->config.flags & SMSC911X_USE_32BIT) {
-		writesl(pdata->ioaddr + __smsc_shift(pdata,
+		iowrite32_rep(pdata->ioaddr + __smsc_shift(pdata,
 						TX_DATA_FIFO), buf, wordcount);
 		goto out;
 	}
@@ -319,7 +319,7 @@ smsc911x_rx_readfifo(struct smsc911x_data *pdata, unsigned int *buf,
 	}
 
 	if (pdata->config.flags & SMSC911X_USE_32BIT) {
-		readsl(pdata->ioaddr + RX_DATA_FIFO, buf, wordcount);
+		ioread32_rep(pdata->ioaddr + RX_DATA_FIFO, buf, wordcount);
 		goto out;
 	}
 
@@ -351,7 +351,7 @@ smsc911x_rx_readfifo_shift(struct smsc911x_data *pdata, unsigned int *buf,
 	}
 
 	if (pdata->config.flags & SMSC911X_USE_32BIT) {
-		readsl(pdata->ioaddr + __smsc_shift(pdata,
+		ioread32_rep(pdata->ioaddr + __smsc_shift(pdata,
 						RX_DATA_FIFO), buf, wordcount);
 		goto out;
 	}
-- 
1.8.0

Re: [PATCH v2 04/10] net: smc911x: use io{read,write}*_rep accessors

[David Miller]

From: Will Deacon <will.deacon@arm.com>
Date: Tue, 11 Dec 2012 14:49:49 +0000

> On Mon, Dec 10, 2012 at 08:47:05PM +0000, David Miller wrote:
>> This misses the two uses in smsc911x_tx_writefifo and
>> smsc911x_rx_readfifo.
> 
> Well spotted, updated patch below.

Although I'd like to take credit, the compiler told me :-)

> From b46e33465e755e945136d19938c9a8331cbafce7 Mon Sep 17 00:00:00 2001
> From: Matthew Leach <matthew@mattleach.net>
> Date: Tue, 6 Nov 2012 14:51:11 +0000
> Subject: [PATCH v3] net: smc911x: use io{read,write}*_rep accessors
> 
> The {read,write}s{b,w,l} operations are not defined by all
> architectures and are being removed from the asm-generic/io.h
> interface.
> 
> This patch replaces the usage of these string functions in the smc911x
> accessors with io{read,write}{8,16,32}_rep calls instead.
> 
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
> Cc: netdev@vger.kernel.org
> Signed-off-by: Matthew Leach <matthew@mattleach.net>
> Signed-off-by: Will Deacon <will.deacon@arm.com>

Applied, thanks.

[PATCH v2 05/10] net: dm9000: use io{read,write}*_rep accessors

[Will Deacon]

From: Matthew Leach <matthew@mattleach.net>

The {read,write}s{b,w,l} operations are not defined by all
architectures and are being removed from the asm-generic/io.h
interface.

This patch replaces the usage of these string functions in the default
DM9000 accessors with io{read,write}{8,16,32}_rep calls instead. This
is required as the dm9000 driver is in use by the blackfin
architecture which uses the asm-generic io accessors.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Matthew Leach <matthew@mattleach.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
---
 drivers/net/ethernet/davicom/dm9000.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c
index 36499d5..61648a6 100644
--- a/drivers/net/ethernet/davicom/dm9000.c
+++ b/drivers/net/ethernet/davicom/dm9000.c
@@ -193,35 +193,35 @@ iow(board_info_t * db, int reg, int value)
 
 static void dm9000_outblk_8bit(void __iomem *reg, void *data, int count)
 {
-	writesb(reg, data, count);
+	iowrite8_rep(reg, data, count);
 }
 
 static void dm9000_outblk_16bit(void __iomem *reg, void *data, int count)
 {
-	writesw(reg, data, (count+1) >> 1);
+	iowrite16_rep(reg, data, (count+1) >> 1);
 }
 
 static void dm9000_outblk_32bit(void __iomem *reg, void *data, int count)
 {
-	writesl(reg, data, (count+3) >> 2);
+	iowrite32_rep(reg, data, (count+3) >> 2);
 }
 
 /* input block from chip to memory */
 
 static void dm9000_inblk_8bit(void __iomem *reg, void *data, int count)
 {
-	readsb(reg, data, count);
+	ioread8_rep(reg, data, count);
 }
 
 
 static void dm9000_inblk_16bit(void __iomem *reg, void *data, int count)
 {
-	readsw(reg, data, (count+1) >> 1);
+	ioread16_rep(reg, data, (count+1) >> 1);
 }
 
 static void dm9000_inblk_32bit(void __iomem *reg, void *data, int count)
 {
-	readsl(reg, data, (count+3) >> 2);
+	ioread32_rep(reg, data, (count+3) >> 2);
 }
 
 /* dump block from chip to null */
-- 
1.8.0

Re: [PATCH v2 05/10] net: dm9000: use io{read,write}*_rep accessors

[David Miller]

From: Will Deacon <will.deacon@arm.com>
Date: Mon, 10 Dec 2012 19:12:37 +0000

> From: Matthew Leach <matthew@mattleach.net>
> 
> The {read,write}s{b,w,l} operations are not defined by all
> architectures and are being removed from the asm-generic/io.h
> interface.
> 
> This patch replaces the usage of these string functions in the default
> DM9000 accessors with io{read,write}{8,16,32}_rep calls instead. This
> is required as the dm9000 driver is in use by the blackfin
> architecture which uses the asm-generic io accessors.
> 
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
> Cc: David Miller <davem@davemloft.net>
> Cc: netdev@vger.kernel.org
> Signed-off-by: Matthew Leach <matthew@mattleach.net>
> Signed-off-by: Will Deacon <will.deacon@arm.com>

Applied.

[PATCH v2 06/10] net: 8390: use io{read,write}*_rep accessors

[Will Deacon]

From: Matthew Leach <matthew@mattleach.net>

The {read,write}s{b,w,l} operations are not defined by all
architectures and are being removed from the asm-generic/io.h
interface.

This patch replaces the usage of these string functions in the 8390
accessors with io{read,write}{8,16,32}_rep calls instead.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Matthew Leach <matthew@mattleach.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
---
 drivers/net/ethernet/8390/ax88796.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/8390/ax88796.c b/drivers/net/ethernet/8390/ax88796.c
index 203ff9d..0338352 100644
--- a/drivers/net/ethernet/8390/ax88796.c
+++ b/drivers/net/ethernet/8390/ax88796.c
@@ -191,11 +191,11 @@ static void ax_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
 	ei_outb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
 
 	if (ei_local->word16)
-		readsw(nic_base + NE_DATAPORT, hdr,
-		       sizeof(struct e8390_pkt_hdr) >> 1);
+		ioread16_rep(nic_base + NE_DATAPORT, hdr,
+			     sizeof(struct e8390_pkt_hdr) >> 1);
 	else
-		readsb(nic_base + NE_DATAPORT, hdr,
-		       sizeof(struct e8390_pkt_hdr));
+		ioread8_rep(nic_base + NE_DATAPORT, hdr,
+			    sizeof(struct e8390_pkt_hdr));
 
 	ei_outb(ENISR_RDC, nic_base + EN0_ISR);	/* Ack intr. */
 	ei_local->dmaing &= ~0x01;
@@ -237,12 +237,12 @@ static void ax_block_input(struct net_device *dev, int count,
 	ei_outb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
 
 	if (ei_local->word16) {
-		readsw(nic_base + NE_DATAPORT, buf, count >> 1);
+		ioread16_rep(nic_base + NE_DATAPORT, buf, count >> 1);
 		if (count & 0x01)
 			buf[count-1] = ei_inb(nic_base + NE_DATAPORT);
 
 	} else {
-		readsb(nic_base + NE_DATAPORT, buf, count);
+		ioread8_rep(nic_base + NE_DATAPORT, buf, count);
 	}
 
 	ei_local->dmaing &= ~1;
@@ -286,9 +286,9 @@ static void ax_block_output(struct net_device *dev, int count,
 
 	ei_outb(E8390_RWRITE+E8390_START, nic_base + NE_CMD);
 	if (ei_local->word16)
-		writesw(nic_base + NE_DATAPORT, buf, count >> 1);
+		iowrite16_rep(nic_base + NE_DATAPORT, buf, count >> 1);
 	else
-		writesb(nic_base + NE_DATAPORT, buf, count);
+		iowrite8_rep(nic_base + NE_DATAPORT, buf, count);
 
 	dma_start = jiffies;
 
-- 
1.8.0

Re: [PATCH v2 06/10] net: 8390: use io{read,write}*_rep accessors

[David Miller]

From: Will Deacon <will.deacon@arm.com>
Date: Mon, 10 Dec 2012 19:12:38 +0000

> From: Matthew Leach <matthew@mattleach.net>
> 
> The {read,write}s{b,w,l} operations are not defined by all
> architectures and are being removed from the asm-generic/io.h
> interface.
> 
> This patch replaces the usage of these string functions in the 8390
> accessors with io{read,write}{8,16,32}_rep calls instead.
> 
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
> Cc: David Miller <davem@davemloft.net>
> Cc: netdev@vger.kernel.org
> Signed-off-by: Matthew Leach <matthew@mattleach.net>
> Signed-off-by: Will Deacon <will.deacon@arm.com>

Applied.