From: "John W. Linville" <linville@tuxdriver.com>
To: davem@davemloft.net
Cc: linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: pull request: wireless 2013-01-09
Date: Wed, 9 Jan 2013 14:53:32 -0500 [thread overview]
Message-ID: <20130109195332.GC17321@tuxdriver.com> (raw)
In-Reply-To: <20130109191817.GA17321@tuxdriver.com>
[-- Attachment #1: Type: text/plain, Size: 7845 bytes --]
Ooops! Forgot to sign it...
On Wed, Jan 09, 2013 at 02:18:18PM -0500, John W. Linville wrote:
> Dave,
>
> Please pull this batch of fixes (and a new driver) for the 3.8 stream...
>
> Included is a mac80211 pull, of which Johannes says the following:
>
> 'This includes a number of fixes for various pieces of mac80211. I've
> also included Thomas's memory RMC hash table optimisation since it
> saves so much memory.'
>
> Also from Johannes is an iwlwifi pull:
>
> 'I have two fixes for iwlwifi: one to fix a lost return value that was
> dropped in a previous patch and could cause "nobody cared" IRQ messages,
> and one to work around a firmware issue.'
>
> Amitkumar Karwar brings an mwifiex for a typo in an comparison.
>
> Bing Zhao gives us an mwifiex fix to properly check the return value
> from wait_event_interruptible and handle it properly.
>
> Chen Gang provides a fix to make iwlegacy use strlcpy instead of
> strncpy, avoiding a potential buffer underflow.
>
> Julian Wollrath fixes a typo in an error message in rtlwifi.
>
> Larry Finger brings a b43 fix for a firmware loading problem.
>
> Nickolai Zeldovich avoids a use-after-free in the mwl8k driver.
>
> Vladimir Kondratiev brings the last big piece, the new Qualcomm/Atheros
> wil6210 802.11ad driver. Since it is for new hardware, I hope that
> taking it for 3.8 is not a problem.
>
> Please let me know if there are problems!
>
> Thanks,
>
> John
>
> ---
>
> The following changes since commit c9be4a5c49cf51cc70a993f004c5bb30067a65ce:
>
> net: prevent setting ttl=0 via IP_TTL (2013-01-08 17:57:10 -0800)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git for-davem
>
> for you to fetch changes up to a9b8a894ad7d0b90b0464c9ac7e8e5c1687edcae:
>
> Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem (2013-01-09 11:01:37 -0500)
>
> ----------------------------------------------------------------
>
> Amitkumar Karwar (1):
> mwifiex: fix typo in setting up ibss network parameters
>
> Bing Zhao (1):
> mwifiex: check wait_event_interruptible return value
>
> Chaitanya (1):
> mac80211: fix maximum MTU
>
> Chen Gang (1):
> drivers/net/wireless/iwlegacy: use strlcpy instead of strncpy
>
> Emmanuel Grumbach (1):
> iwlwifi: fix the reclaimed packet tracking upon flush queue
>
> Felix Fietkau (1):
> mac80211: flush AP_VLAN stations when tearing down the BSS AP
>
> Johannes Berg (5):
> mac80211: assign VLAN channel contexts
> mac80211: fix station destruction in AP/mesh modes
> mac80211: use del_timer_sync for final sta cleanup timer deletion
> mac80211: fix dtim_period in hidden SSID AP association
> iwlwifi: fix PCIe interrupt handle return value
>
> John W. Linville (3):
> Merge branch 'for-john' of git://git.kernel.org/.../jberg/mac80211
> Merge branch 'for-john' of git://git.kernel.org/.../iwlwifi/iwlwifi-fixes
> Merge branch 'master' of git://git.kernel.org/.../linville/wireless into for-davem
>
> Julian Wollrath (1):
> rtlwifi: Fix typo in debug output of rtl8192c and rtl8723ae
>
> Larry Finger (1):
> b43: Fix firmware loading when driver is built into the kernel
>
> Nickolai Zeldovich (1):
> drivers/net/wireless/mwl8k.c: avoid use-after-free
>
> Stanislaw Gruszka (1):
> mac80211: fix ibss scanning
>
> Thomas Pedersen (1):
> mac80211: RMC buckets are just list heads
>
> Vladimir Kondratiev (1):
> wireless: add new wil6210 802.11ad 60GHz driver
>
> MAINTAINERS | 8 +
> drivers/net/wireless/ath/Kconfig | 1 +
> drivers/net/wireless/ath/Makefile | 1 +
> drivers/net/wireless/ath/wil6210/Kconfig | 29 +
> drivers/net/wireless/ath/wil6210/Makefile | 13 +
> drivers/net/wireless/ath/wil6210/cfg80211.c | 573 ++++++++++
> drivers/net/wireless/ath/wil6210/dbg_hexdump.h | 30 +
> drivers/net/wireless/ath/wil6210/debugfs.c | 603 +++++++++++
> drivers/net/wireless/ath/wil6210/interrupt.c | 471 +++++++++
> drivers/net/wireless/ath/wil6210/main.c | 407 +++++++
> drivers/net/wireless/ath/wil6210/netdev.c | 157 +++
> drivers/net/wireless/ath/wil6210/pcie_bus.c | 223 ++++
> drivers/net/wireless/ath/wil6210/txrx.c | 871 +++++++++++++++
> drivers/net/wireless/ath/wil6210/txrx.h | 362 +++++++
> drivers/net/wireless/ath/wil6210/wil6210.h | 363 +++++++
> drivers/net/wireless/ath/wil6210/wmi.c | 975 +++++++++++++++++
> drivers/net/wireless/ath/wil6210/wmi.h | 1116 ++++++++++++++++++++
> drivers/net/wireless/b43/b43.h | 5 +
> drivers/net/wireless/b43/main.c | 54 +-
> drivers/net/wireless/b43/main.h | 5 +-
> drivers/net/wireless/iwlegacy/3945-mac.c | 2 +-
> drivers/net/wireless/iwlwifi/dvm/tx.c | 24 +-
> drivers/net/wireless/iwlwifi/pcie/rx.c | 1 +
> drivers/net/wireless/mwifiex/cfg80211.c | 2 +-
> drivers/net/wireless/mwifiex/sta_ioctl.c | 21 +-
> drivers/net/wireless/mwl8k.c | 4 +-
> drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c | 2 +-
> drivers/net/wireless/rtlwifi/rtl8723ae/phy.c | 2 +-
> net/mac80211/cfg.c | 2 +
> net/mac80211/chan.c | 38 +
> net/mac80211/ibss.c | 9 +-
> net/mac80211/ieee80211_i.h | 16 +-
> net/mac80211/iface.c | 48 +-
> net/mac80211/mesh.c | 8 +-
> net/mac80211/mesh.h | 2 +-
> net/mac80211/mlme.c | 75 +-
> net/mac80211/scan.c | 46 +-
> net/mac80211/sta_info.c | 46 +-
> net/mac80211/sta_info.h | 3 +-
> 39 files changed, 6488 insertions(+), 130 deletions(-)
> create mode 100644 drivers/net/wireless/ath/wil6210/Kconfig
> create mode 100644 drivers/net/wireless/ath/wil6210/Makefile
> create mode 100644 drivers/net/wireless/ath/wil6210/cfg80211.c
> create mode 100644 drivers/net/wireless/ath/wil6210/dbg_hexdump.h
> create mode 100644 drivers/net/wireless/ath/wil6210/debugfs.c
> create mode 100644 drivers/net/wireless/ath/wil6210/interrupt.c
> create mode 100644 drivers/net/wireless/ath/wil6210/main.c
> create mode 100644 drivers/net/wireless/ath/wil6210/netdev.c
> create mode 100644 drivers/net/wireless/ath/wil6210/pcie_bus.c
> create mode 100644 drivers/net/wireless/ath/wil6210/txrx.c
> create mode 100644 drivers/net/wireless/ath/wil6210/txrx.h
> create mode 100644 drivers/net/wireless/ath/wil6210/wil6210.h
> create mode 100644 drivers/net/wireless/ath/wil6210/wmi.c
> create mode 100644 drivers/net/wireless/ath/wil6210/wmi.h
> --
> John W. Linville Someday the world will need a hero, and you
> linville@tuxdriver.com might be all we have. Be ready.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
next prev parent reply other threads:[~2013-01-09 20:00 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-09 19:18 pull request: wireless 2013-01-09 John W. Linville
2013-01-09 19:53 ` John W. Linville [this message]
2013-01-10 8:12 ` David Miller
2013-01-10 10:14 ` Sedat Dilek
[not found] ` <CA+icZUV9+JgZcYKZ4DAoj69D89hF-1cqr_bTpJvfgzWZZJ41kQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-01-10 13:43 ` Sedat Dilek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130109195332.GC17321@tuxdriver.com \
--to=linville@tuxdriver.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).