From: Felipe Balbi <balbi@ti.com>
To: Pieter-Paul Giesberts <pieterpg@broadcom.com>,
Hauke Mehrtens <hauke@hauke-m.de>,
<linux-wireless@vger.kernel.org>,
<brcm80211-dev-list@broadcom.com>, <netdev@vger.kernel.org>
Subject: brcm WARN() on v3.7.2
Date: Fri, 25 Jan 2013 22:23:55 +0200 [thread overview]
Message-ID: <20130125202355.GA4846@arwen.pp.htv.fi> (raw)
[-- Attachment #1: Type: text/plain, Size: 75213 bytes --]
Hi folks,
I'm running Fedora 18 with v3.7.2 on her MacBookAir 11" and it turns out
that brcm is acting out, see below full dmesg. Any tips ? Is this fixed
already ?
cheers
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.7.2-204.fc18.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 4.7.2 20121109 (Red Hat 4.7.2-8) (GCC) ) #1 SMP Wed Jan 16 16:22:52 UTC 2013
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.7.2-204.fc18.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.md=0 rd.dm=0 rd.luks=0 vconsole.keymap=us rd.lvm.lv=fedora/root rhgb quiet LANG=en_US.UTF-8
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000aeffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000af000000-0x00000000beffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bf718fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf719000-0x00000000bf938fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf939000-0x00000000bf953fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf954000-0x00000000bf96afff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf96b000-0x00000000bf96dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf96e000-0x00000000bf99afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf99b000-0x00000000bf9affff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf9b0000-0x00000000bf9dafff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf9db000-0x00000000bfef8fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfef9000-0x00000000bfefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d3200000-0x00000000d3200fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] e820: update [mem 0xae8df018-0xae8edc57] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000ae8df017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ae8df018-0x00000000ae8edc57] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ae8edc58-0x00000000aeffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000af000000-0x00000000beffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000bf000000-0x00000000bf718fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bf719000-0x00000000bf938fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000bf939000-0x00000000bf953fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bf954000-0x00000000bf96afff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000bf96b000-0x00000000bf96dfff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bf96e000-0x00000000bf99afff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000bf99b000-0x00000000bf9affff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bf9b0000-0x00000000bf9dafff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000bf9db000-0x00000000bfef8fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bfef9000-0x00000000bfefffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000d3200000-0x00000000d3200fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v1.10 by Apple
[ 0.000000] efi: ACPI=0xbf96a000 ACPI 2.0=0xbf96a014 SMBIOS=0xbf71a000
[ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x000000000008f000) (0MB)
[ 0.000000] efi: mem01: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
[ 0.000000] efi: mem02: type=2, attr=0xf, range=[0x0000000000090000-0x0000000000092000) (0MB)
[ 0.000000] efi: mem03: type=7, attr=0xf, range=[0x0000000000092000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000001000000-0x00000000023c9000) (19MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x00000000023c9000-0x000000003e17a000) (957MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x000000003e17a000-0x0000000040000000) (30MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000040000000-0x0000000081b94000) (1051MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000081b94000-0x00000000acf9e000) (692MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x00000000acf9e000-0x00000000acfa2000) (0MB)
[ 0.000000] efi: mem11: type=4, attr=0xf, range=[0x00000000acfa2000-0x00000000acfa6000) (0MB)
[ 0.000000] efi: mem12: type=2, attr=0xf, range=[0x00000000acfa6000-0x00000000ad146000) (1MB)
[ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x00000000ad146000-0x00000000ae856000) (23MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x00000000ae856000-0x00000000ae8df000) (0MB)
[ 0.000000] efi: mem15: type=2, attr=0xf, range=[0x00000000ae8df000-0x00000000ae8ee000) (0MB)
[ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x00000000ae8ee000-0x00000000ae96e000) (0MB)
[ 0.000000] efi: mem17: type=7, attr=0xf, range=[0x00000000ae96e000-0x00000000ae96f000) (0MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000ae96f000-0x00000000af000000) (6MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x00000000bf000000-0x00000000bf6af000) (6MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x00000000bf6af000-0x00000000bf719000) (0MB)
[ 0.000000] efi: mem21: type=10, attr=0xf, range=[0x00000000bf719000-0x00000000bf939000) (2MB)
[ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000bf939000-0x00000000bf954000) (0MB)
[ 0.000000] efi: mem23: type=9, attr=0xf, range=[0x00000000bf954000-0x00000000bf96b000) (0MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000bf96b000-0x00000000bf96e000) (0MB)
[ 0.000000] efi: mem25: type=6, attr=0x800000000000000f, range=[0x00000000bf96e000-0x00000000bf99b000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000bf99b000-0x00000000bf9b0000) (0MB)
[ 0.000000] efi: mem27: type=5, attr=0x800000000000000f, range=[0x00000000bf9b0000-0x00000000bf9db000) (0MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x00000000bf9db000-0x00000000bfa64000) (0MB)
[ 0.000000] efi: mem29: type=3, attr=0xf, range=[0x00000000bfa64000-0x00000000bfd5f000) (2MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000bfd5f000-0x00000000bfdb8000) (0MB)
[ 0.000000] efi: mem31: type=1, attr=0xf, range=[0x00000000bfdb8000-0x00000000bfeef000) (1MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x00000000bfeef000-0x00000000bfef9000) (0MB)
[ 0.000000] efi: mem33: type=0, attr=0xf, range=[0x00000000bfef9000-0x00000000bfeff000) (0MB)
[ 0.000000] efi: mem34: type=6, attr=0x800000000000000f, range=[0x00000000bfeff000-0x00000000bff00000) (0MB)
[ 0.000000] efi: mem35: type=7, attr=0xf, range=[0x0000000100000000-0x0000000140000000) (1024MB)
[ 0.000000] efi: mem36: type=0, attr=0x8000000000000000, range=[0x00000000af000000-0x00000000bf000000) (256MB)
[ 0.000000] efi: mem37: type=11, attr=0x8000000000000000, range=[0x00000000d3200000-0x00000000d3201000) (0MB)
[ 0.000000] efi: mem38: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x00000000ffc80000) (0MB)
[ 0.000000] efi: mem39: type=11, attr=0x8000000000000000, range=[0x00000000ffc80000-0x00000000ffca8000) (0MB)
[ 0.000000] efi: mem40: type=11, attr=0x8000000000000000, range=[0x00000000ffca8000-0x00000000ffcca000) (0MB)
[ 0.000000] efi: mem41: type=11, attr=0x8000000000000000, range=[0x00000000ffcca000-0x00000000ffffc000) (3MB)
[ 0.000000] efi: mem42: type=11, attr=0x8000000000000000, range=[0x00000000ffffc000-0x0000000100000000) (0MB)
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Apple Inc. MacBookAir3,1/Mac-942452F5819B1C1B, BIOS MBA31.88Z.0061.B07.1201241641 01/24/12
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbfef9 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xbfef8fff]
[ 0.000000] [mem 0x00000000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbfef8fff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xbfef8fff @ [mem 0x1fffb000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13fffffff]
[ 0.000000] [mem 0x100000000-0x13fffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x13fffffff @ [mem 0xbfef7000-0xbfef8fff]
[ 0.000000] RAMDISK: [mem 0x3e17a000-0x3fffafff]
[ 0.000000] ACPI: RSDP 00000000bf96a014 00024 (v02 APPLE )
[ 0.000000] ACPI: XSDT 00000000bf96a1c0 00084 (v01 APPLE Apple00 00000061 01000013)
[ 0.000000] ACPI: FACP 00000000bf968000 000F4 (v04 APPLE Apple00 00000061 Loki 0000005F)
[ 0.000000] ACPI: DSDT 00000000bf95b000 0572C (v01 APPLE MacBookA 00030001 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000bf71e000 00040
[ 0.000000] ACPI: HPET 00000000bf967000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 00000000bf966000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 00000000bf965000 00068 (v02 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ASF! 00000000bf963000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST 00000000bf962000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT 00000000bf961000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 00000000bf958000 00107 (v01 APPLE SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bf957000 00024 (v01 APPLE Apple 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bf955000 0008A (v01 APPLE NoSDCard 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bf954000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: MCFG 00000000bf964000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13ffec000-0x13fffffff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b800000-ffff88013f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0008efff]
[ 0.000000] node 0: [mem 0x00090000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0xaeffffff]
[ 0.000000] node 0: [mem 0xbf000000-0xbf718fff]
[ 0.000000] node 0: [mem 0xbf939000-0xbf953fff]
[ 0.000000] node 0: [mem 0xbf96b000-0xbf96dfff]
[ 0.000000] node 0: [mem 0xbf99b000-0xbf9affff]
[ 0.000000] node 0: [mem 0xbf9db000-0xbfef8fff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 982009
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 8 pages reserved
[ 0.000000] DMA zone: 3911 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 699562 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 258048 pages, LIFO batch:31
[ 0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000008f000 - 0000000000090000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000ae8df000 - 00000000ae8e0000
[ 0.000000] PM: Registered nosave memory: 00000000ae8ed000 - 00000000ae8ee000
[ 0.000000] PM: Registered nosave memory: 00000000af000000 - 00000000bf000000
[ 0.000000] PM: Registered nosave memory: 00000000bf719000 - 00000000bf939000
[ 0.000000] PM: Registered nosave memory: 00000000bf954000 - 00000000bf96b000
[ 0.000000] PM: Registered nosave memory: 00000000bf96e000 - 00000000bf99b000
[ 0.000000] PM: Registered nosave memory: 00000000bf9b0000 - 00000000bf9db000
[ 0.000000] PM: Registered nosave memory: 00000000bfef9000 - 00000000bff00000
[ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000d3200000
[ 0.000000] PM: Registered nosave memory: 00000000d3200000 - 00000000d3201000
[ 0.000000] PM: Registered nosave memory: 00000000d3201000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
[ 0.000000] e820: [mem 0xd3201000-0xffbfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s84288 r8192 d22208 u1048576
[ 0.000000] pcpu-alloc: s84288 r8192 d22208 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 961521
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.7.2-204.fc18.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.md=0 rd.dm=0 rd.luks=0 vconsole.keymap=us rd.lvm.lv=fedora/root rhgb quiet LANG=en_US.UTF-8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 3709948k/5242880k available (6407k kernel code, 1314844k absent, 218088k reserved, 6793k data, 1068k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:8448 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16252928 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1596.634 MHz processor
[ 0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.26 BogoMIPS (lpj=1596634)
[ 0.001009] pid_max: default: 32768 minimum: 301
[ 0.001037] init_memory_mapping: [mem 0xbfeff000-0xbfefffff]
[ 0.001042] [mem 0xbfeff000-0xbfefffff] page 4k
[ 0.186363] Security Framework initialized
[ 0.186377] SELinux: Initializing.
[ 0.186391] SELinux: Starting in permissive mode
[ 0.187046] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.189678] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.190892] Mount-cache hash table entries: 256
[ 0.191244] Initializing cgroup subsys cpuacct
[ 0.191248] Initializing cgroup subsys memory
[ 0.191268] Initializing cgroup subsys devices
[ 0.191270] Initializing cgroup subsys freezer
[ 0.191272] Initializing cgroup subsys net_cls
[ 0.191275] Initializing cgroup subsys blkio
[ 0.191277] Initializing cgroup subsys perf_event
[ 0.191321] CPU: Physical Processor ID: 0
[ 0.191323] CPU: Processor Core ID: 0
[ 0.191326] mce: CPU supports 6 MCE banks
[ 0.191337] CPU0: Thermal monitoring enabled (TM2)
[ 0.191342] process: using mwait in idle threads
[ 0.191348] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
[ 0.191512] Freeing SMP alternatives: 24k freed
[ 0.193733] ACPI: Core revision 20120913
[ 0.202451] ftrace: allocating 23745 entries in 93 pages
[ 0.213152] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.223160] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU U9600 @ 1.60GHz (fam: 06, model: 17, stepping: 0a)
[ 0.224000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.224000] ... version: 2
[ 0.224000] ... bit width: 40
[ 0.224000] ... generic registers: 2
[ 0.224000] ... value mask: 000000ffffffffff
[ 0.224000] ... max period: 000000007fffffff
[ 0.224000] ... fixed-purpose events: 3
[ 0.224000] ... event mask: 0000000700000003
[ 0.225059] smpboot: Booting Node 0, Processors #1 OK
[ 0.237029] Brought up 2 CPUs
[ 0.237036] smpboot: Total of 2 processors activated (6386.53 BogoMIPS)
[ 0.237171] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.239080] devtmpfs: initialized
[ 0.239236] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.239236] PM: Registering ACPI NVS region [mem 0xbf719000-0xbf938fff] (2228224 bytes)
[ 0.240737] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.240802] RTC time: 20:17:17, date: 01/25/13
[ 0.240869] NET: Registered protocol family 16
[ 0.241124] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.241127] ACPI: bus type pci registered
[ 0.241458] PCI: MMCONFIG for domain 0000 [bus 00-02] at [mem 0xf0000000-0xf02fffff] (base 0xf0000000)
[ 0.241461] PCI: not using MMCONFIG
[ 0.241464] PCI: Using configuration type 1 for base access
[ 0.242707] bio: create slab <bio-0> at 0
[ 0.243048] ACPI: Added _OSI(Module Device)
[ 0.243051] ACPI: Added _OSI(Processor Device)
[ 0.243053] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.243056] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.244793] ACPI: EC: EC description table is found, configuring boot EC
[ 0.249509] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.249921] ACPI: SSDT 00000000bf71dc98 0023D (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.250313] ACPI: Dynamic OEM Table Load:
[ 0.250318] ACPI: SSDT (null) 0023D (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.250492] ACPI: SSDT 00000000bf71c618 005A6 (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.250861] ACPI: Dynamic OEM Table Load:
[ 0.250865] ACPI: SSDT (null) 005A6 (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.260266] ACPI: SSDT 00000000bf71df18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.260643] ACPI: Dynamic OEM Table Load:
[ 0.260647] ACPI: SSDT (null) 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.260764] ACPI: SSDT 00000000bf71bf18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.261139] ACPI: Dynamic OEM Table Load:
[ 0.261143] ACPI: SSDT (null) 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.270216] ACPI: Interpreter enabled
[ 0.270221] ACPI: (supports S0 S3 S4 S5)
[ 0.270241] ACPI: Using IOAPIC for interrupt routing
[ 0.270262] PCI: MMCONFIG for domain 0000 [bus 00-02] at [mem 0xf0000000-0xf02fffff] (base 0xf0000000)
[ 0.270582] PCI: MMCONFIG at [mem 0xf0000000-0xf02fffff] reserved in ACPI motherboard resources
[ 0.282280] ACPI: EC: GPE = 0x57, I/O: command/status = 0x66, data = 0x62
[ 0.282487] ACPI: No dock devices found.
[ 0.282492] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.282670] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.282789] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-02] only partially covers this bridge
[ 0.282828] PCI host bridge to bus 0000:00
[ 0.282833] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.282836] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.282840] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.282843] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.282846] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.282849] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.282852] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.282856] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 0.282859] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.282862] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.282865] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.282868] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.282871] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.282874] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.282877] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.282880] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.282884] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.282887] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[ 0.282907] pci 0000:00:00.0: [10de:0d60] type 00 class 0x060000
[ 0.283039] pci 0000:00:00.1: [10de:0d68] type 00 class 0x050000
[ 0.283225] pci 0000:00:01.0: [10de:0d6d] type 00 class 0x050000
[ 0.283403] pci 0000:00:01.1: [10de:0d6e] type 00 class 0x050000
[ 0.283581] pci 0000:00:01.2: [10de:0d6f] type 00 class 0x050000
[ 0.283759] pci 0000:00:01.3: [10de:0d70] type 00 class 0x050000
[ 0.283942] pci 0000:00:02.0: [10de:0d71] type 00 class 0x050000
[ 0.284127] pci 0000:00:02.1: [10de:0d72] type 00 class 0x050000
[ 0.284306] pci 0000:00:03.0: [10de:0d80] type 00 class 0x060100
[ 0.284319] pci 0000:00:03.0: reg 10: [io 0x2100-0x21ff]
[ 0.284377] pci 0000:00:03.1: [10de:0d7b] type 00 class 0x050000
[ 0.284475] pci 0000:00:03.2: [10de:0d79] type 00 class 0x0c0500
[ 0.284493] pci 0000:00:03.2: reg 10: [io 0x2000-0x20ff]
[ 0.284503] pci 0000:00:03.2: reg 14: [mem 0xd3286000-0xd3287fff]
[ 0.284525] pci 0000:00:03.2: reg 20: [io 0x2240-0x227f]
[ 0.284534] pci 0000:00:03.2: reg 24: [io 0x2200-0x223f]
[ 0.284576] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.284607] pci 0000:00:03.3: [10de:0d69] type 00 class 0x050000
[ 0.284826] pci 0000:00:03.4: [10de:0d7a] type 00 class 0x0b4000
[ 0.284850] pci 0000:00:03.4: reg 10: [mem 0xd3200000-0xd327ffff]
[ 0.285009] pci 0000:00:04.0: [10de:0d9c] type 00 class 0x0c0310
[ 0.285025] pci 0000:00:04.0: reg 10: [mem 0xd328a000-0xd328afff]
[ 0.285087] pci 0000:00:04.0: supports D1 D2
[ 0.285090] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.285111] pci 0000:00:04.1: [10de:0d9d] type 00 class 0x0c0320
[ 0.285129] pci 0000:00:04.1: reg 10: [mem 0xd328b100-0xd328b1ff]
[ 0.285201] pci 0000:00:04.1: supports D1 D2
[ 0.285204] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.285238] pci 0000:00:06.0: [10de:0d9c] type 00 class 0x0c0310
[ 0.285253] pci 0000:00:06.0: reg 10: [mem 0xd3289000-0xd3289fff]
[ 0.285315] pci 0000:00:06.0: supports D1 D2
[ 0.285318] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.285339] pci 0000:00:06.1: [10de:0d9d] type 00 class 0x0c0320
[ 0.285356] pci 0000:00:06.1: reg 10: [mem 0xd328b000-0xd328b0ff]
[ 0.285429] pci 0000:00:06.1: supports D1 D2
[ 0.285432] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.285467] pci 0000:00:08.0: [10de:0d94] type 00 class 0x040300
[ 0.285485] pci 0000:00:08.0: reg 10: [mem 0xd3280000-0xd3283fff]
[ 0.285560] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.285586] pci 0000:00:0a.0: [10de:0d88] type 00 class 0x010601
[ 0.285602] pci 0000:00:0a.0: reg 10: [io 0x2298-0x229f]
[ 0.285611] pci 0000:00:0a.0: reg 14: [io 0x22a4-0x22a7]
[ 0.285619] pci 0000:00:0a.0: reg 18: [io 0x2290-0x2297]
[ 0.285628] pci 0000:00:0a.0: reg 1c: [io 0x22a0-0x22a3]
[ 0.285636] pci 0000:00:0a.0: reg 20: [io 0x2280-0x228f]
[ 0.285645] pci 0000:00:0a.0: reg 24: [mem 0xd3284000-0xd3285fff]
[ 0.285702] pci 0000:00:0b.0: [10de:0d75] type 00 class 0x050000
[ 0.285720] pci 0000:00:0b.0: reg 10: [mem 0xd3288000-0xd3288fff]
[ 0.285868] pci 0000:00:15.0: [10de:0d9b] type 01 class 0x060400
[ 0.286149] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.286217] pci 0000:00:17.0: [10de:0d76] type 01 class 0x060400
[ 0.286273] pci 0000:00:17.0: PME# supported from D0 D3hot D3cold
[ 0.286550] pci 0000:01:00.0: [14e4:4353] type 00 class 0x028000
[ 0.286574] pci 0000:01:00.0: reg 10: [mem 0xd3100000-0xd3103fff 64bit]
[ 0.286693] pci 0000:01:00.0: supports D1 D2
[ 0.286696] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.286764] pci 0000:00:15.0: PCI bridge to [bus 01]
[ 0.286789] pci 0000:00:15.0: bridge window [mem 0xd3100000-0xd31fffff]
[ 0.286849] pci 0000:02:00.0: [10de:08a2] type 00 class 0x030000
[ 0.286866] pci 0000:02:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
[ 0.286878] pci 0000:02:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.286889] pci 0000:02:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.286898] pci 0000:02:00.0: reg 24: [io 0x1000-0x107f]
[ 0.286907] pci 0000:02:00.0: reg 30: [mem 0xd3000000-0xd301ffff pref]
[ 0.286971] pci 0000:00:17.0: PCI bridge to [bus 02]
[ 0.286977] pci 0000:00:17.0: bridge window [io 0x1000-0x1fff]
[ 0.286981] pci 0000:00:17.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.286987] pci 0000:00:17.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.287014] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.287201] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
[ 0.287336] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.287525] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.303734] ACPI: PCI Interrupt Link [LNK1] (IRQs *16 17 18 19 20 21 22 23)
[ 0.303850] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 *17 18 19 20 21 22 23)
[ 0.303958] ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 *18 19 20 21 22 23)
[ 0.304073] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 *19 20 21 22 23)
[ 0.304180] ACPI: PCI Interrupt Link [Z00J] (IRQs 16 17 18 19 20 *21 22 23)
[ 0.304288] ACPI: PCI Interrupt Link [Z00K] (IRQs 16 17 18 19 20 *21 22 23)
[ 0.304395] ACPI: PCI Interrupt Link [Z00L] (IRQs 16 17 18 19 20 *21 22 23)
[ 0.304503] ACPI: PCI Interrupt Link [Z00M] (IRQs 16 17 18 19 20 *21 22 23)
[ 0.304610] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 *22 23)
[ 0.304716] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 *17 18 19 20 21 22 23)
[ 0.304822] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 *17 18 19 20 21 22 23)
[ 0.304928] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 *17 18 19 20 21 22 23)
[ 0.305044] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 *20 21 22 23)
[ 0.305153] ACPI: PCI Interrupt Link [LGPU] (IRQs *16 17 18 19 20 21 22 23)
[ 0.305256] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.305364] ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 *18 19 20 21 22 23)
[ 0.305470] ACPI: PCI Interrupt Link [Z000] (IRQs 16 17 *18 19 20 21 22 23)
[ 0.305576] ACPI: PCI Interrupt Link [Z001] (IRQs 16 17 18 19 20 21 *22 23)
[ 0.305679] ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.305767] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
[ 0.305767] vgaarb: loaded
[ 0.305767] vgaarb: bridge control possible 0000:02:00.0
[ 0.305767] SCSI subsystem initialized
[ 0.305767] ACPI: bus type scsi registered
[ 0.305767] libata version 3.00 loaded.
[ 0.305767] ACPI: bus type usb registered
[ 0.305767] usbcore: registered new interface driver usbfs
[ 0.305767] usbcore: registered new interface driver hub
[ 0.306015] usbcore: registered new device driver usb
[ 0.306060] PCI: Using ACPI for IRQ routing
[ 0.306060] PCI: pci_cache_line_size set to 64 bytes
[ 0.306096] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.306099] e820: reserve RAM buffer [mem 0xae8df018-0xafffffff]
[ 0.306102] e820: reserve RAM buffer [mem 0xaf000000-0xafffffff]
[ 0.306104] e820: reserve RAM buffer [mem 0xbf719000-0xbfffffff]
[ 0.306107] e820: reserve RAM buffer [mem 0xbf954000-0xbfffffff]
[ 0.306111] e820: reserve RAM buffer [mem 0xbf96e000-0xbfffffff]
[ 0.306113] e820: reserve RAM buffer [mem 0xbf9b0000-0xbfffffff]
[ 0.306116] e820: reserve RAM buffer [mem 0xbfef9000-0xbfffffff]
[ 0.306243] NetLabel: Initializing
[ 0.306246] NetLabel: domain hash size = 128
[ 0.306247] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.306263] NetLabel: unlabeled traffic allowed by default
[ 0.306334] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.306341] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.306348] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.308013] Switching to clocksource hpet
[ 0.317929] pnp: PnP ACPI init
[ 0.317959] ACPI: bus type pnp registered
[ 0.318116] pnp 00:00: [bus 00-ff]
[ 0.318121] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.318125] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.318128] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.318131] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.318135] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.318138] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.318141] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.318144] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.318147] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.318154] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.318158] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.318161] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.318164] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.318167] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.318170] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.318173] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.318176] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.318180] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
[ 0.318239] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.318266] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.318269] pnp 00:01: [mem 0xf0000000-0xf3ffffff]
[ 0.318341] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.318347] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.318364] pnp 00:02: [io 0x0300-0x031f]
[ 0.318382] pnp 00:02: [irq 6]
[ 0.318407] pnp 00:02: Plug and Play ACPI device, IDs APP0001 (active)
[ 0.318465] pnp 00:03: [io 0x0000-0x0008]
[ 0.318468] pnp 00:03: [io 0x000a-0x000f]
[ 0.318471] pnp 00:03: [io 0x0081-0x0083]
[ 0.318474] pnp 00:03: [io 0x0087]
[ 0.318477] pnp 00:03: [io 0x0089-0x008b]
[ 0.318480] pnp 00:03: [io 0x008f]
[ 0.318483] pnp 00:03: [io 0x00c0-0x00d1]
[ 0.318486] pnp 00:03: [io 0x00d4-0x00df]
[ 0.318489] pnp 00:03: [dma 4]
[ 0.318520] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.318593] pnp 00:04: [irq 0 disabled]
[ 0.318602] pnp 00:04: [irq 8]
[ 0.318605] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.318647] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.318652] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.318667] pnp 00:05: [io 0x00f0-0x00f1]
[ 0.318674] pnp 00:05: [irq 13]
[ 0.318709] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.318853] pnp 00:06: [io 0x0400-0x047f]
[ 0.318857] pnp 00:06: [io 0x0480-0x04ff]
[ 0.318860] pnp 00:06: [io 0x0500-0x057f]
[ 0.318863] pnp 00:06: [io 0x0580-0x05ff]
[ 0.318866] pnp 00:06: [io 0x0800-0x087f]
[ 0.318869] pnp 00:06: [io 0x0880-0x08ff]
[ 0.318871] pnp 00:06: [io 0x0010-0x001f]
[ 0.318874] pnp 00:06: [io 0x0022-0x003f]
[ 0.318877] pnp 00:06: [io 0x0044-0x005f]
[ 0.318880] pnp 00:06: [io 0x0063]
[ 0.318883] pnp 00:06: [io 0x0065]
[ 0.318886] pnp 00:06: [io 0x0067-0x006f]
[ 0.318889] pnp 00:06: [io 0x0072-0x0073]
[ 0.318892] pnp 00:06: [io 0x0074-0x007f]
[ 0.318895] pnp 00:06: [io 0x0091-0x0093]
[ 0.318901] pnp 00:06: [io 0x0097-0x009f]
[ 0.318904] pnp 00:06: [io 0x00a2-0x00bf]
[ 0.318907] pnp 00:06: [io 0x00e0-0x00ef]
[ 0.318910] pnp 00:06: [io 0x04d0-0x04d1]
[ 0.318913] pnp 00:06: [io 0x0080]
[ 0.318916] pnp 00:06: [io 0x0295-0x0296]
[ 0.318970] system 00:06: [io 0x0400-0x047f] has been reserved
[ 0.318974] system 00:06: [io 0x0480-0x04ff] has been reserved
[ 0.318977] system 00:06: [io 0x0500-0x057f] has been reserved
[ 0.318981] system 00:06: [io 0x0580-0x05ff] has been reserved
[ 0.318984] system 00:06: [io 0x0800-0x087f] has been reserved
[ 0.318988] system 00:06: [io 0x0880-0x08ff] has been reserved
[ 0.318992] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.318996] system 00:06: [io 0x0295-0x0296] has been reserved
[ 0.319011] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.319023] pnp 00:07: [io 0x0070-0x0077]
[ 0.319055] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.324425] pnp: PnP ACPI: found 8 devices
[ 0.324428] ACPI: ACPI bus type pnp unregistered
[ 0.332048] pci 0000:00:15.0: PCI bridge to [bus 01]
[ 0.332064] pci 0000:00:15.0: bridge window [mem 0xd3100000-0xd31fffff]
[ 0.332088] pci 0000:00:17.0: PCI bridge to [bus 02]
[ 0.332091] pci 0000:00:17.0: bridge window [io 0x1000-0x1fff]
[ 0.332097] pci 0000:00:17.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.332102] pci 0000:00:17.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.332291] ACPI: PCI Interrupt Link [Z00J] enabled at IRQ 21
[ 0.332312] pci 0000:00:17.0: setting latency timer to 64
[ 0.332318] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.332321] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.332324] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.332328] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.332331] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.332334] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.332337] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.332340] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.332343] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.332346] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.332349] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.332352] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.332355] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.332358] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.332361] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.332365] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[ 0.332368] pci_bus 0000:00: resource 20 [mem 0xc0000000-0xfebfffff]
[ 0.332372] pci_bus 0000:01: resource 1 [mem 0xd3100000-0xd31fffff]
[ 0.332375] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.332378] pci_bus 0000:02: resource 1 [mem 0xd2000000-0xd30fffff]
[ 0.332382] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.332438] NET: Registered protocol family 2
[ 0.333708] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.338299] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.338901] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.338991] TCP: reno registered
[ 0.339034] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.339082] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.339247] NET: Registered protocol family 1
[ 0.339587] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 17
[ 0.390205] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23
[ 0.390407] ACPI: PCI Interrupt Link [Z000] enabled at IRQ 18
[ 0.441195] ACPI: PCI Interrupt Link [Z001] enabled at IRQ 22
[ 0.441335] PCI: CLS 256 bytes, default 64
[ 0.441411] Unpacking initramfs...
[ 1.302075] Freeing initrd memory: 31236k freed
[ 1.320056] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.320065] software IO TLB [mem 0xa8fa2000-0xacfa1fff] (64MB) mapped at [ffff8800a8fa2000-ffff8800acfa1fff]
[ 1.320866] Initialise module verification
[ 1.320932] audit: initializing netlink socket (disabled)
[ 1.320952] type=2000 audit(1359145038.320:1): initialized
[ 1.355228] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.357586] VFS: Disk quotas dquot_6.5.2
[ 1.357651] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.358271] msgmni has been set to 7386
[ 1.358362] SELinux: Registering netfilter hooks
[ 1.359033] alg: No test for stdrng (krng)
[ 1.359043] NET: Registered protocol family 38
[ 1.359048] Key type asymmetric registered
[ 1.359050] Asymmetric key parser 'x509' registered
[ 1.359104] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.359140] io scheduler noop registered
[ 1.359143] io scheduler deadline registered
[ 1.359154] io scheduler cfq registered (default)
[ 1.359471] pcieport 0000:00:15.0: irq 40 for MSI/MSI-X
[ 1.359701] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 1.359705] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.359715] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[ 1.359735] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.359759] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.359762] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.360257] efifb: probing for efifb
[ 1.361812] efifb: framebuffer at 0xc0010000, mapped to 0xffffc90001780000, using 6144k, total 6144k
[ 1.361815] efifb: mode is 1366x768x32, linelength=8192, pages=1
[ 1.361817] efifb: scrolling: redraw
[ 1.361820] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.361922] Console: switching to colour frame buffer device 170x48
[ 1.366152] fb0: EFI VGA frame buffer device
[ 1.366160] intel_idle: does not run on family 6 model 23
[ 1.366244] ACPI: AC Adapter [ADP1] (on-line)
[ 1.366365] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.366386] ACPI: Lid Switch [LID0]
[ 1.366438] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.366443] ACPI: Power Button [PWRB]
[ 1.366492] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 1.366496] ACPI: Sleep Button [SLPB]
[ 1.366568] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.366571] ACPI: Power Button [PWRF]
[ 1.366803] ACPI: Requesting acpi_cpufreq
[ 1.368343] Monitor-Mwait will be used to enter C-1 state
[ 1.368352] Monitor-Mwait will be used to enter C-2 state
[ 1.368356] Monitor-Mwait will be used to enter C-3 state
[ 1.368361] tsc: Marking TSC unstable due to TSC halts in idle
[ 1.368374] ACPI: acpi_idle registered with cpuidle
[ 1.381106] GHES: HEST is not enabled!
[ 1.381201] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.381991] Non-volatile memory driver v1.3
[ 1.381994] Linux agpgart interface v0.103
[ 1.383652] loop: module loaded
[ 1.383736] ahci 0000:00:0a.0: version 3.0
[ 1.384173] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 20
[ 1.384331] ahci 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 1.384371] ahci 0000:00:0a.0: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 1.384377] ahci 0000:00:0a.0: flags: 64bit ncq sntf pm led pio slum part apst
[ 1.384382] ahci 0000:00:0a.0: setting latency timer to 64
[ 1.384714] scsi0 : ahci
[ 1.384788] ata1: SATA max UDMA/133 abar m8192@0xd3284000 port 0xd3284100 irq 41
[ 1.384906] libphy: Fixed MDIO Bus: probed
[ 1.384972] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.385026] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 1.385031] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 1.385149] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 1.385162] ehci_hcd 0000:00:04.1: debug port 1
[ 1.385187] ehci_hcd 0000:00:04.1: disable lpm/ppcd for nvidia mcp89
[ 1.406027] ehci_hcd 0000:00:04.1: cache line size of 256 is not supported
[ 1.406047] ehci_hcd 0000:00:04.1: irq 23, io mem 0xd328b100
[ 1.412025] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.10
[ 1.412053] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.412057] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.412060] usb usb1: Product: EHCI Host Controller
[ 1.412063] usb usb1: Manufacturer: Linux 3.7.2-204.fc18.x86_64 ehci_hcd
[ 1.412066] usb usb1: SerialNumber: 0000:00:04.1
[ 1.412210] hub 1-0:1.0: USB hub found
[ 1.412216] hub 1-0:1.0: 6 ports detected
[ 1.412753] ehci_hcd 0000:00:06.1: setting latency timer to 64
[ 1.412758] ehci_hcd 0000:00:06.1: EHCI Host Controller
[ 1.412815] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 1.412826] ehci_hcd 0000:00:06.1: debug port 1
[ 1.412846] ehci_hcd 0000:00:06.1: disable lpm/ppcd for nvidia mcp89
[ 1.433025] ehci_hcd 0000:00:06.1: cache line size of 256 is not supported
[ 1.433043] ehci_hcd 0000:00:06.1: irq 22, io mem 0xd328b000
[ 1.439024] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.10
[ 1.439043] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.439046] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.439050] usb usb2: Product: EHCI Host Controller
[ 1.439053] usb usb2: Manufacturer: Linux 3.7.2-204.fc18.x86_64 ehci_hcd
[ 1.439056] usb usb2: SerialNumber: 0000:00:06.1
[ 1.439187] hub 2-0:1.0: USB hub found
[ 1.439193] hub 2-0:1.0: 6 ports detected
[ 1.439718] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.439747] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 1.439752] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 1.439838] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 1.439867] ohci_hcd 0000:00:04.0: irq 17, io mem 0xd328a000
[ 1.482970] ACPI: Battery Slot [BAT0] (battery present)
[ 1.492037] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.492041] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.492044] usb usb3: Product: OHCI Host Controller
[ 1.492048] usb usb3: Manufacturer: Linux 3.7.2-204.fc18.x86_64 ohci_hcd
[ 1.492051] usb usb3: SerialNumber: 0000:00:04.0
[ 1.492184] hub 3-0:1.0: USB hub found
[ 1.492191] hub 3-0:1.0: 6 ports detected
[ 1.492729] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 1.492733] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 1.492785] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 1.492810] ohci_hcd 0000:00:06.0: irq 18, io mem 0xd3289000
[ 1.545038] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.545042] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.545045] usb usb4: Product: OHCI Host Controller
[ 1.545049] usb usb4: Manufacturer: Linux 3.7.2-204.fc18.x86_64 ohci_hcd
[ 1.545052] usb usb4: SerialNumber: 0000:00:06.0
[ 1.545182] hub 4-0:1.0: USB hub found
[ 1.545189] hub 4-0:1.0: 6 ports detected
[ 1.545700] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.545779] usbcore: registered new interface driver usbserial
[ 1.545790] usbcore: registered new interface driver usbserial_generic
[ 1.545799] usbserial: USB Serial support registered for generic
[ 1.545856] mousedev: PS/2 mouse device common for all mice
[ 1.546127] rtc_cmos 00:07: RTC can wake from S4
[ 1.546395] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.546448] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.546577] device-mapper: uevent: version 1.0.3
[ 1.546671] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
[ 1.546811] cpuidle: using governor ladder
[ 1.546874] cpuidle: using governor menu
[ 1.547245] EFI Variables Facility v0.08 2004-May-17
[ 1.689245] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.689573] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.689661] ata1.00: ATA-8: APPLE SSD TS128C, CJAA0201, max UDMA/100
[ 1.689665] ata1.00: 236978176 sectors, multi 16: LBA48
[ 1.690034] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.690133] ata1.00: configured for UDMA/100
[ 1.690268] scsi 0:0:0:0: Direct-Access ATA APPLE SSD TS128C CJAA PQ: 0 ANSI: 5
[ 1.690456] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.690527] ACPI: Invalid Power Resource to register!
[ 1.690563] sd 0:0:0:0: [sda] 236978176 512-byte logical blocks: (121 GB/113 GiB)
[ 1.690646] sd 0:0:0:0: [sda] Write Protect is off
[ 1.690650] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.690677] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.692724] sda: sda1 sda2 sda3
[ 1.693088] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.822881] usbcore: registered new interface driver usbhid
[ 1.822883] usbhid: USB HID core driver
[ 1.822914] drop_monitor: Initializing network drop monitor service
[ 1.823034] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.823081] TCP: cubic registered
[ 1.823084] Initializing XFRM netlink socket
[ 1.823239] NET: Registered protocol family 10
[ 1.823461] mip6: Mobile IPv6
[ 1.823465] NET: Registered protocol family 17
[ 1.823861] PM: Hibernation image not present or could not be loaded.
[ 1.823863] Loading module verification certificates
[ 1.825422] MODSIGN: Loaded cert 'Fedora kernel signing key: 5d4d3db151807b6ebce83001a24319304d98d21f'
[ 1.825440] registered taskstats version 1
[ 1.826548] Magic number: 13:688:296
[ 1.826589] tty tty29: hash matches
[ 1.826701] rtc_cmos 00:07: setting system clock to 2013-01-25 20:17:19 UTC (1359145039)
[ 1.829590] Freeing unused kernel memory: 1068k freed
[ 1.830056] Write protecting the kernel read-only data: 12288k
[ 1.837216] Freeing unused kernel memory: 1776k freed
[ 1.843238] Freeing unused kernel memory: 1404k freed
[ 1.919162] usb 1-6: new high-speed USB device number 4 using ehci_hcd
[ 2.047904] usb 1-6: New USB device found, idVendor=05ac, idProduct=850a
[ 2.047913] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.047920] usb 1-6: Product: Built-in iSight
[ 2.047926] usb 1-6: Manufacturer: Apple Inc.
[ 2.047932] usb 1-6: SerialNumber: CCGB1CTXMGDF9KF0
[ 2.186358] systemd[1]: systemd 197 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 2.186878] systemd[1]: Running in initial RAM disk.
[ 2.187329] systemd[1]: No hostname configured.
[ 2.187347] systemd[1]: Set hostname to <localhost>.
[ 2.187671] systemd[1]: Initializing machine ID from random generator.
[ 2.211774] systemd[1]: Starting Encrypted Volumes.
[ 2.211819] systemd[1]: Reached target Encrypted Volumes.
[ 2.211987] systemd[1]: Starting udev Kernel Socket.
[ 2.212103] systemd[1]: Listening on udev Kernel Socket.
[ 2.212245] systemd[1]: Starting udev Control Socket.
[ 2.212340] systemd[1]: Listening on udev Control Socket.
[ 2.212371] systemd[1]: Starting Journal Socket.
[ 2.212513] systemd[1]: Listening on Journal Socket.
[ 2.212550] systemd[1]: Starting dracut cmdline hook...
[ 2.222357] systemd[1]: Started Load Kernel Modules.
[ 2.222415] systemd[1]: Starting Journal Service...
[ 2.232434] systemd[1]: Started Journal Service.
[ 2.243221] systemd[1]: Starting Sockets.
[ 2.243271] systemd[1]: Reached target Sockets.
[ 2.243312] systemd[1]: Starting Swap.
[ 2.243344] systemd[1]: Reached target Swap.
[ 2.243373] systemd[1]: Starting Local File Systems.
[ 2.243404] systemd[1]: Reached target Local File Systems.
[ 2.495408] RPC: Registered named UNIX socket transport module.
[ 2.495413] RPC: Registered udp transport module.
[ 2.495415] RPC: Registered tcp transport module.
[ 2.495417] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.522049] usb 3-3: new full-speed USB device number 2 using ohci_hcd
[ 2.609510] systemd-udevd[150]: starting version 197
[ 2.723061] usb 3-3: New USB device found, idVendor=05ac, idProduct=0242
[ 2.723074] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.723082] usb 3-3: Product: Apple Internal Keyboard / Trackpad
[ 2.723088] usb 3-3: Manufacturer: Apple Inc.
[ 2.738838] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.0/input/input4
[ 2.738946] apple 0003:05AC:0242.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-3/input0
[ 2.751160] apple 0003:05AC:0242.0002: hidraw1: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-3/input1
[ 2.812819] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
[ 2.813030] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
[ 2.813219] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/LNXVIDEO:00/input/input5
[ 2.851173] [drm] Initialized drm 1.1.0 20060810
[ 2.862539] wmi: Mapper loaded
[ 2.891890] checking generic (c0010000 600000) vs hw (c0000000 10000000)
[ 2.891895] fb: conflicting fb hw usage nouveaufb vs EFI VGA - removing generic driver
[ 2.891920] Console: switching to colour dummy device 80x25
[ 2.898579] nouveau 0000:02:00.0: setting latency timer to 64
[ 2.898591] nouveau 0000:02:00.0: enabling device (0006 -> 0007)
[ 2.898808] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16
[ 2.899735] nouveau [ DEVICE][0000:02:00.0] BOOT0 : 0x0af100a2
[ 2.899741] nouveau [ DEVICE][0000:02:00.0] Chipset: MCP89 (NVAF)
[ 2.899744] nouveau [ DEVICE][0000:02:00.0] Family : NV50
[ 2.907202] nouveau [ VBIOS][0000:02:00.0] checking PRAMIN for image...
[ 2.967292] nouveau [ VBIOS][0000:02:00.0] ... appears to be valid
[ 2.967297] nouveau [ VBIOS][0000:02:00.0] using image from PRAMIN
[ 2.967448] nouveau [ VBIOS][0000:02:00.0] BIT signature found
[ 2.967452] nouveau [ VBIOS][0000:02:00.0] version 70.89.13.00
[ 2.987849] nouveau [ MXM][0000:02:00.0] no VBIOS data, nothing to do
[ 3.070924] usb 3-5: new full-speed USB device number 3 using ohci_hcd
[ 3.071110] nouveau [ PFB][0000:02:00.0] RAM type: stolen system memory
[ 3.071114] nouveau [ PFB][0000:02:00.0] RAM size: 256 MiB
[ 3.270052] usb 3-5: New USB device found, idVendor=0a5c, idProduct=4500
[ 3.270059] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.270062] usb 3-5: Product: BRCM2070 Hub
[ 3.270066] usb 3-5: Manufacturer: Apple Inc.
[ 3.273080] hub 3-5:1.0: USB hub found
[ 3.276036] hub 3-5:1.0: 3 ports detected
[ 3.589058] usb 3-5.1: new full-speed USB device number 4 using ohci_hcd
[ 3.689046] usb 3-5.1: New USB device found, idVendor=05ac, idProduct=820a
[ 3.689051] usb 3-5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.698446] input: HID 05ac:820a as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5.1/3-5.1:1.0/input/input6
[ 3.698545] hid-generic 0003:05AC:820A.0003: input,hidraw2: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:04.0-5.1/input0
[ 3.720083] nouveau W[ PCE0][0000:02:00.0] disabled, PCE0=1 to enable
[ 3.720219] [TTM] Zone kernel: Available graphics memory: 1893110 kiB
[ 3.720222] [TTM] Initializing pool allocator
[ 3.720228] [TTM] Initializing DMA pool allocator
[ 3.722468] nouveau [ DRM] VRAM: 256 MiB
[ 3.722474] nouveau [ DRM] GART: 512 MiB
[ 3.722480] nouveau [ DRM] BIT BIOS found
[ 3.722484] nouveau [ DRM] Bios version 70.89.13.00
[ 3.722489] nouveau [ DRM] TMDS table version 2.0
[ 3.722492] nouveau [ DRM] DCB version 4.0
[ 3.722495] nouveau [ DRM] DCB outp 00: 040001b6 0f220010
[ 3.722499] nouveau [ DRM] DCB outp 01: 020112a6 0f220010
[ 3.722502] nouveau [ DRM] DCB outp 02: 02011262 00020010
[ 3.722505] nouveau [ DRM] DCB conn 00: 00002047
[ 3.722509] nouveau [ DRM] DCB conn 01: 00101146
[ 3.735376] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.735379] [drm] No driver support for vblank timestamp query.
[ 4.904369] nouveau [ DRM] 4 available performance level(s)
[ 4.904375] nouveau [ DRM] 0: core 405MHz shader 405MHz memory 405MHz voltage 900mV
[ 4.904380] nouveau [ DRM] 1: core 450MHz shader 810MHz memory 450MHz voltage 900mV
[ 4.904385] nouveau [ DRM] 2: core 450MHz shader 810MHz memory 450MHz voltage 900mV
[ 4.904389] nouveau [ DRM] 3: core 450MHz shader 950MHz memory 450MHz voltage 900mV
[ 4.904393] nouveau [ DRM] c: core 405MHz shader 810MHz
[ 4.905014] [sched_delayed] sched: RT throttling activated
[ 4.906050] usb 3-5.2: new full-speed USB device number 5 using ohci_hcd
[ 5.004884] nouveau [ DRM] MM: using M2MF for buffer copies
[ 5.049071] nouveau [ DRM] allocated 1366x768 fb: 0x50000, bo ffff8801330e1400
[ 5.049179] fbcon: nouveaufb (fb0) is primary device
[ 5.085068] usb 3-5.2: New USB device found, idVendor=05ac, idProduct=820b
[ 5.085073] usb 3-5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.091844] Console: switching to colour frame buffer device 170x48
[ 5.094132] fb0: nouveaufb frame buffer device
[ 5.094134] drm: registered panic notifier
[ 5.094140] [drm] Initialized nouveau 1.1.0 20120801 for 0000:02:00.0 on minor 0
[ 5.094407] input: HID 05ac:820b as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5.2/3-5.2:1.0/input/input7
[ 5.094548] hid-generic 0003:05AC:820B.0004: input,hidraw3: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:04.0-5.2/input0
[ 5.167041] usb 3-5.3: new full-speed USB device number 6 using ohci_hcd
[ 5.232371] bio: create slab <bio-1> at 1
[ 5.277056] usb 3-5.3: New USB device found, idVendor=05ac, idProduct=821b
[ 5.277064] usb 3-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.277068] usb 3-5.3: Product: Bluetooth USB Host Controller
[ 5.277071] usb 3-5.3: Manufacturer: Apple Inc.
[ 5.323104] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.401812] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.763329] systemd-journald[55]: Received SIGTERM
[ 5.885206] type=1404 audit(1359145043.558:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 5.943829] SELinux: 2048 avtab hash slots, 94354 rules.
[ 5.966668] SELinux: 2048 avtab hash slots, 94354 rules.
[ 6.259136] SELinux: 9 users, 15 roles, 4357 types, 236 bools, 1 sens, 1024 cats
[ 6.259142] SELinux: 83 classes, 94354 rules
[ 6.266534] SELinux: Completing initialization.
[ 6.266539] SELinux: Setting up existing superblocks.
[ 6.266548] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 6.266555] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 6.266574] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 6.266581] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 6.266596] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 6.266622] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[ 6.267748] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 6.267755] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 6.270178] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 6.270189] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 6.270194] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 6.270218] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 6.270230] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 6.270240] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 6.270271] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 6.271248] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[ 6.271254] SELinux: initialized (dev efivarfs, type efivarfs), uses genfs_contexts
[ 6.271280] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 6.271289] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 6.271433] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 6.271476] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 6.271483] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 6.271496] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 6.271540] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 6.271557] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 6.271566] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 6.271572] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 6.271580] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 6.271595] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 6.271604] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
[ 6.271621] SELinux: initialized (dev dm-1, type ext4), uses xattr
[ 6.303388] type=1403 audit(1359145043.976:3): policy loaded auid=4294967295 ses=4294967295
[ 6.316105] systemd[1]: Successfully loaded SELinux policy in 435ms 804us.
[ 6.381883] systemd[1]: Relabelled /dev and /run in 36ms 388us.
[ 6.652383] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 6.666772] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 6.675341] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 6.738960] systemd-udevd[376]: starting version 197
[ 6.833189] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 6.892625] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[ 6.921422] tun: Universal TUN/TAP device driver, 1.6
[ 6.921426] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 7.058681] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.095517] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[ 7.101008] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
[ 7.109593] bcma: bus0: Found chip with id 0xA8D8, rev 0x01 and package 0x08
[ 7.109616] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 7.109634] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 7.109668] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 7.114302] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[ 7.115009] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
[ 7.123091] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 7.159026] bcma: bus0: Bus registered
[ 7.228647] snd_hda_intel 0000:00:08.0: enabling device (0000 -> 0002)
[ 7.228972] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 19
[ 7.229059] hda_intel: Disabling MSI
[ 7.229062] hda_intel: position_fix set to 1 for device 10de:cb89
[ 7.229164] snd_hda_intel 0000:00:08.0: setting latency timer to 64
[ 7.241509] ALSA sound/pci/hda/hda_intel.c:1628 Enable delay in RIRB handling
[ 7.263663] input: bcm5974 as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/input/input8
[ 7.263973] usbcore: registered new interface driver bcm5974
[ 7.332838] Bluetooth: Core ver 2.16
[ 7.332871] NET: Registered protocol family 31
[ 7.332874] Bluetooth: HCI device and connection manager initialized
[ 7.332885] Bluetooth: HCI socket layer initialized
[ 7.332889] Bluetooth: L2CAP socket layer initialized
[ 7.332897] Bluetooth: SCO socket layer initialized
[ 7.344328] usbcore: registered new interface driver btusb
[ 7.351492] media: Linux media interface: v0.10
[ 7.361078] Linux video capture interface: v2.00
[ 7.366438] cfg80211: Calling CRDA to update world regulatory domain
[ 7.385058] usb 3-5.1: USB disconnect, device number 4
[ 7.385231] cfg80211: World regulatory domain updated:
[ 7.385234] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.385237] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.385240] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.385243] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.385246] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.385248] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.414857] applesmc: key=322 fan=1 temp=27 index=26 acc=0 lux=0 kbd=0
[ 7.423911] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:850a)
[ 7.431237] input: Built-in iSight as /devices/pci0000:00/0000:00:04.1/usb1/1-6/1-6:1.0/input/input9
[ 7.431554] usbcore: registered new interface driver uvcvideo
[ 7.431557] USB Video Class driver (1.1.1)
[ 7.459877] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 21
[ 7.513473] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 7.518721] Adding 3801084k swap on /dev/mapper/fedora-swap. Priority:-1 extents:1 across:3801084k SS
[ 7.535050] usb 3-5.2: USB disconnect, device number 5
[ 7.637761] ALSA sound/pci/hda/hda_auto_parser.c:318 autoconfig: line_outs=2 (0xb/0xa/0x0/0x0/0x0) type:speaker
[ 7.637767] ALSA sound/pci/hda/hda_auto_parser.c:322 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.637770] ALSA sound/pci/hda/hda_auto_parser.c:326 hp_outs=1 (0x9/0x0/0x0/0x0/0x0)
[ 7.637773] ALSA sound/pci/hda/hda_auto_parser.c:327 mono: mono_out=0x0
[ 7.637776] ALSA sound/pci/hda/hda_auto_parser.c:330 dig-out=0x10/0x0
[ 7.637778] ALSA sound/pci/hda/hda_auto_parser.c:331 inputs:
[ 7.637781] ALSA sound/pci/hda/hda_auto_parser.c:335 Mic=0xd
[ 7.639461] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 7.639683] SELinux: initialized (dev sda2, type ext4), uses xattr
[ 7.674634] SELinux: initialized (dev sda1, type hfsplus), uses genfs_contexts
[ 7.883280] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.0/sound/card0/input10
[ 7.883524] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.0/sound/card0/input11
[ 7.883717] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.0/sound/card0/input12
[ 7.883908] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:08.0/sound/card0/input13
[ 8.186825] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 8.186839] SELinux: initialized (dev dm-2, type ext4), uses xattr
[ 8.382602] systemd-journald[406]: Received SIGUSR1
[ 8.798596] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.798601] Bluetooth: BNEP filters: protocol multicast
[ 8.798614] Bluetooth: BNEP socket layer initialized
[ 8.822744] Bluetooth: RFCOMM TTY layer initialized
[ 8.822764] Bluetooth: RFCOMM socket layer initialized
[ 8.822766] Bluetooth: RFCOMM ver 1.11
[ 9.149697] Loading iSCSI transport class v2.0-870.
[ 9.185557] iscsi: registered transport (tcp)
[ 9.240372] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 9.294356] Ebtables v2.0 registered
[ 9.365221] iscsi: registered transport (iser)
[ 9.400465] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
[ 9.400471] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
[ 9.508168] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 9.508182] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 9.522696] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9.529471] Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
[ 9.529958] iscsi: registered transport (cxgb3i)
[ 9.606464] Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
[ 9.607916] iscsi: registered transport (cxgb4i)
[ 9.617810] nouveau W[ PCE0][0000:02:00.0] disabled, PCE0=1 to enable
[ 9.643803] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.14 (Sep 30, 2012)
[ 9.651162] Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Apr 25, 2012)
[ 9.667370] iscsi: registered transport (bnx2i)
[ 9.721297] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 9.733520] iscsi: registered transport (be2iscsi)
[ 9.733526] In beiscsi_module_init, tt=ffffffffa06ed000
[ 10.736366] nouveau W[ PCE0][0000:02:00.0] disabled, PCE0=1 to enable
[ 12.289251] nouveau W[ PCE0][0000:02:00.0] disabled, PCE0=1 to enable
[ 17.634442] wlan0: authenticate with 10:9a:dd:89:4c:84
[ 17.653618] wlan0: direct probe to 10:9a:dd:89:4c:84 (try 1/3)
[ 17.854059] wlan0: send auth to 10:9a:dd:89:4c:84 (try 2/3)
[ 17.854544] wlan0: authenticated
[ 17.856057] wlan0: associate with 10:9a:dd:89:4c:84 (try 1/3)
[ 17.859052] wlan0: RX AssocResp from 10:9a:dd:89:4c:84 (capab=0x511 status=0 aid=3)
[ 17.859471] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 17.859483] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 17.859490] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 17.859516] wlan0: associated
[ 17.859545] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 17.859776] cfg80211: Calling CRDA for country: FI
[ 17.877610] cfg80211: Regulatory domain changed to country: FI
[ 17.877616] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.877619] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 17.877621] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 17.877624] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 17.877627] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 17.880113] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by 10:9a:dd:89:4c:84
[ 18.018462] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 20.264533] cgroup: libvirtd (1226) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[ 20.264543] cgroup: "memory" requires setting use_hierarchy to 1 on the root.
[ 20.264715] cgroup: libvirtd (1226) created nested cgroup for controller "devices" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[ 20.264817] cgroup: libvirtd (1226) created nested cgroup for controller "freezer" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[ 20.264905] cgroup: libvirtd (1226) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[ 25.876145] fuse init (API version 7.20)
[ 25.885175] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[ 27.411152] nouveau W[ PCE0][0000:02:00.0] disabled, PCE0=1 to enable
[ 37.599098] ------------[ cut here ]------------
[ 37.599163] WARNING: at drivers/net/wireless/brcm80211/brcmsmac/main.c:7993 brcms_c_wait_for_tx_completion+0x99/0xb0 [brcmsmac]()
[ 37.599167] Hardware name: MacBookAir3,1
[ 37.599171] Modules linked in: fuse ebtable_nat ipt_MASQUERADE nf_conntrack_netbios_ns nf_conntrack_broadcast ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat nf_nat_ipv4 nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 be2iscsi xt_conntrack nf_conntrack iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser ebtable_filter rdma_cm ib_addr iw_cm ib_cm ebtables ip6table_filter ip6_tables ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi rfcomm bnep snd_hda_codec_hdmi nls_utf8 hfsplus snd_hda_codec_cirrus arc4 brcmsmac cordic brcmutil uvcvideo mac80211 videobuf2_vmalloc videobuf2_memops videobuf2_core cfg80211 videodev media btusb bluetooth joydev rfkill bcm5974 coretemp snd_hda_intel snd_hda_codec snd_hwdep snd_seq applesmc
[ 37.599287] snd_seq_device input_polldev snd_pcm bcma microcode snd_page_alloc snd_timer snd shpchp soundcore apple_bl vhost_net tun macvtap macvlan kvm_intel kvm uinput nouveau mxm_wmi wmi i2c_algo_bit drm_kms_helper ttm drm i2c_core video sunrpc
[ 37.599342] Pid: 6, comm: kworker/u:0 Not tainted 3.7.2-204.fc18.x86_64 #1
[ 37.599347] Call Trace:
[ 37.599366] [<ffffffff8105e67f>] warn_slowpath_common+0x7f/0xc0
[ 37.599375] [<ffffffff8105e6da>] warn_slowpath_null+0x1a/0x20
[ 37.599402] [<ffffffffa051ec99>] brcms_c_wait_for_tx_completion+0x99/0xb0 [brcmsmac]
[ 37.599423] [<ffffffffa05116bb>] brcms_ops_flush+0x3b/0x60 [brcmsmac]
[ 37.599478] [<ffffffffa04317ed>] ieee80211_mgd_probe_ap_send+0x13d/0x200 [mac80211]
[ 37.599508] [<ffffffffa03dc5ee>] ? cfg80211_cqm_rssi_notify+0x2e/0x40 [cfg80211]
[ 37.599549] [<ffffffffa042fb91>] ? ieee80211_cqm_rssi_notify+0x41/0xa0 [mac80211]
[ 37.599590] [<ffffffffa0431e5c>] ieee80211_mgd_probe_ap.part.25+0x12c/0x150 [mac80211]
[ 37.599631] [<ffffffffa0431eaa>] ieee80211_sta_monitor_work+0x2a/0x30 [mac80211]
[ 37.599642] [<ffffffff8107a487>] process_one_work+0x147/0x490
[ 37.599683] [<ffffffffa0431e80>] ? ieee80211_mgd_probe_ap.part.25+0x150/0x150 [mac80211]
[ 37.599691] [<ffffffff8107cd1e>] worker_thread+0x15e/0x450
[ 37.599700] [<ffffffff8107cbc0>] ? busy_worker_rebind_fn+0x110/0x110
[ 37.599709] [<ffffffff81081c80>] kthread+0xc0/0xd0
[ 37.599716] [<ffffffff8107a8c0>] ? rescuer_thread+0xb0/0x240
[ 37.599727] [<ffffffff81010000>] ? ftrace_raw_event_xen_mmu_flush_tlb_others+0x50/0xe0
[ 37.599735] [<ffffffff81081bc0>] ? kthread_create_on_node+0x120/0x120
[ 37.599746] [<ffffffff8163de2c>] ret_from_fork+0x7c/0xb0
[ 37.599754] [<ffffffff81081bc0>] ? kthread_create_on_node+0x120/0x120
[ 37.599759] ---[ end trace c70b3d4e5e865a15 ]---
[ 41.060113] nouveau W[ PCE0][0000:02:00.0] disabled, PCE0=1 to enable
--
balbi
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
next reply other threads:[~2013-01-25 20:24 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-25 20:23 Felipe Balbi [this message]
2013-01-26 10:53 ` brcm WARN() on v3.7.2 Arend van Spriel
[not found] ` <5103B595.8060805-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2013-01-26 12:56 ` Felipe Balbi
2013-01-26 15:14 ` Luciano Coelho
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130125202355.GA4846@arwen.pp.htv.fi \
--to=balbi@ti.com \
--cc=brcm80211-dev-list@broadcom.com \
--cc=hauke@hauke-m.de \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pieterpg@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).