From: Joerg Mayer <jmayer@loplof.de>
To: gregkh@linuxfoundation.org, linux-usb@vger.kernel.org,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: BUG: ipheth - NETDEV WATCHDOG: eth1 (ipheth): transmit queue 0 timed out
Date: Thu, 21 Mar 2013 00:24:58 +0100 [thread overview]
Message-ID: <20130320232458.GH4743@rhrk.uni-kl.de> (raw)
Hello,
ipheth does not work for me at all with iPhone5 and iOS 6.
Setup:
Thinkpad T60 (32 bit) with openSUSE 12.1 (with current kernel repo)
iPhone5 with iOS 6.1.2
USB-Cable between laptop and iphone
In the moment I enable Hotspot with USB-cable connected to phone and
laptop, I get the following message:
--------------------------------------------------------
[Wed Mar 20 04:51:24 2013] usb 1-2: new high-speed USB device number 4 using ehci-pci
[Wed Mar 20 04:51:24 2013] usb 1-2: New USB device found, idVendor=05ac, idProduct=12a8
[Wed Mar 20 04:51:24 2013] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[Wed Mar 20 04:51:24 2013] usb 1-2: Product: iPhone
[Wed Mar 20 04:51:24 2013] usb 1-2: Manufacturer: Apple Inc.
[Wed Mar 20 04:51:24 2013] usb 1-2: SerialNumber: XXX
[Wed Mar 20 04:51:24 2013] ipheth 1-2:4.2: Apple iPhone USB Ethernet device attached
[Wed Mar 20 04:51:24 2013] usbcore: registered new interface driver ipheth
[Wed Mar 20 04:52:46 2013] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[Wed Mar 20 04:55:28 2013] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[Wed Mar 20 04:55:33 2013] ------------[ cut here ]------------
[Wed Mar 20 04:55:33 2013] WARNING: at /home/abuild/rpmbuild/BUILD/kernel-desktop-3.8.3/linux-3.8/net/sched/sch_generic.c:254 dev_watchdog+0x1e0/0x1f0()
[Wed Mar 20 04:55:33 2013] Hardware name: 200763G
[Wed Mar 20 04:55:33 2013] NETDEV WATCHDOG: eth1 (ipheth): transmit queue 0 timed out
[Wed Mar 20 04:55:33 2013] Modules linked in: ipheth md4 md5 nls_utf8 cifs fscache ppdev parport_pc lp parport af_packet rfcomm bnep binfmt_misc tp_smapi(OF) thinkpad_ec(OF) cpufreq_conservative cpufreq_userspace cpufreq_powersave sha256_generic cbc dm_crypt dm_mod snd_hda_codec_analog snd_hda_intel btusb snd_hda_codec bluetooth acpi_cpufreq arc4 pcmcia iwl3945 mperf iwlegacy coretemp snd_hwdep snd_pcm mac80211 kvm_intel iTCO_wdt iTCO_vendor_support snd_timer kvm sg lpc_ich snd_page_alloc mfd_core yenta_socket cfg80211 thinkpad_acpi pcmcia_rsrc pcmcia_core sr_mod cdrom i2c_i801 rfkill snd joydev irda tpm_tis e1000e tpm tpm_bios crc_ccitt microcode video battery soundcore ac button autofs4 radeon ttm drm_kms_helper drm i2c_algo_bit scsi_dh_hp_sw scsi_dh_emc scsi_dh_alua scsi_dh_rdac scsi_dh edd fan ata_generic ata_piix thermal processor thermal_sys
[Wed Mar 20 04:55:33 2013] Pid: 0, comm: swapper/0 Tainted: GF O 3.8.3-1-desktop #1
[Wed Mar 20 04:55:33 2013] Call Trace:
[Wed Mar 20 04:55:33 2013] [<c0205709>] try_stack_unwind+0x199/0x1b0
[Wed Mar 20 04:55:33 2013] [<c0204417>] dump_trace+0x47/0xf0
[Wed Mar 20 04:55:33 2013] [<c020576b>] show_trace_log_lvl+0x4b/0x60
[Wed Mar 20 04:55:33 2013] [<c0205798>] show_trace+0x18/0x20
[Wed Mar 20 04:55:33 2013] [<c071a6cb>] dump_stack+0x6d/0x72
[Wed Mar 20 04:55:33 2013] [<c02391c8>] warn_slowpath_common+0x78/0xb0
[Wed Mar 20 04:55:33 2013] [<c0239293>] warn_slowpath_fmt+0x33/0x40
[Wed Mar 20 04:55:33 2013] [<c0666350>] dev_watchdog+0x1e0/0x1f0
[Wed Mar 20 04:55:33 2013] [<c0247ed4>] call_timer_fn+0x24/0x120
[Wed Mar 20 04:55:33 2013] [<c0248172>] run_timer_softirq+0x1a2/0x240
[Wed Mar 20 04:55:33 2013] [<c0240fb9>] __do_softirq+0x99/0x1e0
[Wed Mar 20 04:55:33 2013] [<c02042f6>] do_softirq+0x76/0xb0
[Wed Mar 20 04:55:33 2013] [<0000000f>] 0xe
[Wed Mar 20 04:55:33 2013] ---[ end trace dd5a449765340b63 ]---
[Wed Mar 20 04:55:33 2013] ipheth 1-2:4.2: ipheth_tx_timeout: TX timeout
[Wed Mar 20 04:55:38 2013] ipheth 1-2:4.2: ipheth_tx_timeout: TX timeout
[Wed Mar 20 04:55:48 2013] ipheth 1-2:4.2: ipheth_tx_timeout: TX timeout
[Wed Mar 20 04:55:58 2013] ipheth 1-2:4.2: ipheth_tx_timeout: TX timeout
[Wed Mar 20 04:56:08 2013] ipheth 1-2:4.2: ipheth_tx_timeout: TX timeout
[Wed Mar 20 04:56:18 2013] ipheth 1-2:4.2: ipheth_tx_timeout: TX timeout
--------------------------------------------------------
The bug also occurs
- when I turn on hotpot first and plug in the cable afterwards.
- with the vanilla kernel from the same repo (and without loading
the tp_smapi module which taints the kernel in the log above).
- for others (https://bugzilla.novell.com/show_bug.cgi?id=779643).
That link also contains messages from another system with an earlier
kernel other iphone model and earlier iOS.
What other information is required to get this problem resolved?
Thanks
Jörg
--
Joerg Mayer <jmayer@loplof.de>
We are stuck with technology when what we really want is just stuff that
works. Some say that should read Microsoft instead of technology.
reply other threads:[~2013-03-20 23:24 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130320232458.GH4743@rhrk.uni-kl.de \
--to=jmayer@loplof.de \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).