* [PATCH V4 2/4] PHYLIB: queue work on unbound wq
[not found] <cover.1364739015.git.viresh.kumar@linaro.org>
@ 2013-03-31 14:27 ` Viresh Kumar
0 siblings, 0 replies; 3+ messages in thread
From: Viresh Kumar @ 2013-03-31 14:27 UTC (permalink / raw)
To: tj
Cc: linaro-kernel, patches, robin.randhawa, Steve.Bannister,
Liviu.Dudau, charles.garcia-tobin, arvind.chauhan, davem, airlied,
axboe, Viresh Kumar, netdev
Phylib uses workqueues for multiple purposes. There is no real dependency of
scheduling these on the cpu which scheduled them.
On a idle system, it is observed that and idle cpu wakes up many times just to
service this work. It would be better if we can schedule it on a cpu which the
scheduler believes to be the most appropriate one.
This patch replaces system_wq with system_unbound_wq for PHYLIB.
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
drivers/net/phy/phy.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index c14f147..b2fe180 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -439,7 +439,7 @@ void phy_start_machine(struct phy_device *phydev,
{
phydev->adjust_state = handler;
- schedule_delayed_work(&phydev->state_queue, HZ);
+ queue_delayed_work(system_unbound_wq, &phydev->state_queue, HZ);
}
/**
@@ -500,7 +500,7 @@ static irqreturn_t phy_interrupt(int irq, void *phy_dat)
disable_irq_nosync(irq);
atomic_inc(&phydev->irq_disable);
- schedule_work(&phydev->phy_queue);
+ queue_work(system_unbound_wq, &phydev->phy_queue);
return IRQ_HANDLED;
}
@@ -655,7 +655,7 @@ static void phy_change(struct work_struct *work)
/* reschedule state queue work to run as soon as possible */
cancel_delayed_work_sync(&phydev->state_queue);
- schedule_delayed_work(&phydev->state_queue, 0);
+ queue_delayed_work(system_unbound_wq, &phydev->state_queue, 0);
return;
@@ -918,7 +918,8 @@ void phy_state_machine(struct work_struct *work)
if (err < 0)
phy_error(phydev);
- schedule_delayed_work(&phydev->state_queue, PHY_STATE_TIME * HZ);
+ queue_delayed_work(system_unbound_wq, &phydev->state_queue,
+ PHY_STATE_TIME * HZ);
}
static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad,
--
1.7.12.rc2.18.g61b472e
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH V4 2/4] PHYLIB: queue work on unbound wq
[not found] <cover.1364740180.git.viresh.kumar@linaro.org>
@ 2013-03-31 14:31 ` Viresh Kumar
2013-03-31 16:45 ` David Miller
0 siblings, 1 reply; 3+ messages in thread
From: Viresh Kumar @ 2013-03-31 14:31 UTC (permalink / raw)
To: tj
Cc: linaro-kernel, patches, robin.randhawa, Steve.Bannister,
Liviu.Dudau, charles.garcia-tobin, arvind.chauhan, davem, airlied,
axboe, tglx, peterz, mingo, rostedt, linux-rt-users, linux-kernel,
Viresh Kumar, netdev
Phylib uses workqueues for multiple purposes. There is no real dependency of
scheduling these on the cpu which scheduled them.
On a idle system, it is observed that and idle cpu wakes up many times just to
service this work. It would be better if we can schedule it on a cpu which the
scheduler believes to be the most appropriate one.
This patch replaces system_wq with system_unbound_wq for PHYLIB.
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
drivers/net/phy/phy.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index c14f147..b2fe180 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -439,7 +439,7 @@ void phy_start_machine(struct phy_device *phydev,
{
phydev->adjust_state = handler;
- schedule_delayed_work(&phydev->state_queue, HZ);
+ queue_delayed_work(system_unbound_wq, &phydev->state_queue, HZ);
}
/**
@@ -500,7 +500,7 @@ static irqreturn_t phy_interrupt(int irq, void *phy_dat)
disable_irq_nosync(irq);
atomic_inc(&phydev->irq_disable);
- schedule_work(&phydev->phy_queue);
+ queue_work(system_unbound_wq, &phydev->phy_queue);
return IRQ_HANDLED;
}
@@ -655,7 +655,7 @@ static void phy_change(struct work_struct *work)
/* reschedule state queue work to run as soon as possible */
cancel_delayed_work_sync(&phydev->state_queue);
- schedule_delayed_work(&phydev->state_queue, 0);
+ queue_delayed_work(system_unbound_wq, &phydev->state_queue, 0);
return;
@@ -918,7 +918,8 @@ void phy_state_machine(struct work_struct *work)
if (err < 0)
phy_error(phydev);
- schedule_delayed_work(&phydev->state_queue, PHY_STATE_TIME * HZ);
+ queue_delayed_work(system_unbound_wq, &phydev->state_queue,
+ PHY_STATE_TIME * HZ);
}
static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad,
--
1.7.12.rc2.18.g61b472e
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH V4 2/4] PHYLIB: queue work on unbound wq
2013-03-31 14:31 ` [PATCH V4 2/4] PHYLIB: queue work on unbound wq Viresh Kumar
@ 2013-03-31 16:45 ` David Miller
0 siblings, 0 replies; 3+ messages in thread
From: David Miller @ 2013-03-31 16:45 UTC (permalink / raw)
To: viresh.kumar
Cc: tj, linaro-kernel, patches, robin.randhawa, Steve.Bannister,
Liviu.Dudau, charles.garcia-tobin, arvind.chauhan, airlied, axboe,
tglx, peterz, mingo, rostedt, linux-rt-users, linux-kernel,
netdev
From: Viresh Kumar <viresh.kumar@linaro.org>
Date: Sun, 31 Mar 2013 20:01:45 +0530
> Phylib uses workqueues for multiple purposes. There is no real dependency of
> scheduling these on the cpu which scheduled them.
>
> On a idle system, it is observed that and idle cpu wakes up many times just to
> service this work. It would be better if we can schedule it on a cpu which the
> scheduler believes to be the most appropriate one.
>
> This patch replaces system_wq with system_unbound_wq for PHYLIB.
>
> Cc: David S. Miller <davem@davemloft.net>
> Cc: netdev@vger.kernel.org
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: David S. Miller <davem@davemloft.net>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-03-31 16:45 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <cover.1364740180.git.viresh.kumar@linaro.org>
2013-03-31 14:31 ` [PATCH V4 2/4] PHYLIB: queue work on unbound wq Viresh Kumar
2013-03-31 16:45 ` David Miller
[not found] <cover.1364739015.git.viresh.kumar@linaro.org>
2013-03-31 14:27 ` Viresh Kumar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).