r8169 with 3.9.0-rc9

netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* r8169 with 3.9.0-rc9
@ 2013-04-26 13:23 Lance Lassetter
  2013-04-26 20:50 ` Francois Romieu
  0 siblings, 1 reply; 22+ messages in thread
From: Lance Lassetter @ 2013-04-26 13:23 UTC (permalink / raw)
  To: netdev

hello,

i've exhausted my efforts to resolve this so i am sending you this email in hopes you might shed some light on the problem.

i have an onboard r8169 and a secondary pcie r8169 chipset gigabit ethernet adapters.

the link keeps sputtering with constant kernel messages (dmesg) of "link up link down"

the variant of linux is fedora 18 with testing branch enabled and fedora "vanilla" kernel with minimal fedora patchset taken from fedora vanilla kernel repos as instructed on the fedora wiki.

the reason for the development kernel is i hoped with this, this problem would be resolved.

dmesg looks like:

[52857.473520] r8169 0000:03:00.0 p10p1: link down
[52859.763261] r8169 0000:03:00.0 p10p1: link up
[52859.771250] r8169 0000:04:09.0 p8p1: link up
[52917.512992] r8169 0000:04:09.0 p8p1: link down
[52917.534918] r8169 0000:03:00.0 p10p1: link down
[52919.846520] r8169 0000:04:09.0 p8p1: link up
[52919.850411] r8169 0000:03:00.0 p10p1: link up
[53977.329829] r8169 0000:03:00.0 p10p1: link down
[53979.798396] r8169 0000:03:00.0 p10p1: link up
[54087.331434] r8169 0000:03:00.0 p10p1: link down
[54089.730198] r8169 0000:03:00.0 p10p1: link up

etc....

the box serves as a network router so it is causing abundant network traffic problems.

any debugging i could help you with, please let me know.  also if there is a possible solution, please let me know.

kind regards and i wish you the best,

lance lassetter

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: r8169 with 3.9.0-rc9
  2013-04-26 13:23 r8169 with 3.9.0-rc9 Lance Lassetter
@ 2013-04-26 20:50 ` Francois Romieu
  2013-04-27  4:12   ` Lance Lassetter
  0 siblings, 1 reply; 22+ messages in thread
From: Francois Romieu @ 2013-04-26 20:50 UTC (permalink / raw)
  To: Lance Lassetter; +Cc: netdev

Lance Lassetter <lancelassetter@gmail.com> :
[...]
> the box serves as a network router so it is causing abundant network
> traffic problems.
> 
> any debugging i could help you with, please let me know.  also if there
> is a possible solution, please let me know.

Is it a regression and / or an Asus M5A97 system ?

The XID lines that the kernel printed when the r8169 module gets loaded
may help.

-- 
Ueimor

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: r8169 with 3.9.0-rc9
  2013-04-26 20:50 ` Francois Romieu
@ 2013-04-27  4:12   ` Lance Lassetter
  2013-04-28  1:12     ` Lance Lassetter
  0 siblings, 1 reply; 22+ messages in thread
From: Lance Lassetter @ 2013-04-27  4:12 UTC (permalink / raw)
  To: Francois Romieu; +Cc: netdev

On Fri, Apr 26, 2013 at 10:50:18PM +0200, Francois Romieu wrote:
> Lance Lassetter <lancelassetter@gmail.com> :
> [...]
> > the box serves as a network router so it is causing abundant network
> > traffic problems.
> > 
> > any debugging i could help you with, please let me know.  also if there
> > is a possible solution, please let me know.
> 
> Is it a regression and / or an Asus M5A97 system ?
> 
> The XID lines that the kernel printed when the r8169 module gets loaded
> may help.
> 
> -- 
> Ueimor

lance@annun10 ~$ dmesg | grep -i xid
[    6.370821] r8169 0000:03:00.0 eth0: RTL8168c/8111c at 0xffffc90000c70000, 00
:22:19:28:86:61, XID 1c4000c0 IRQ 45
[    6.371103] r8169 0000:04:09.0 eth1: RTL8169sb/8110sb at 0xffffc90000c7ec00,
48:02:2a:07:90:45, XID 10000000 IRQ 20
lance@annun10 ~$

i don't think it's a regression and it's a Dell XPS 625 with an addon r8169 so there are two r8169 cards in the system.  it is a testing fedora repository system though with vanilla mainline kernel.

hope this helps,

lance

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: r8169 with 3.9.0-rc9
  2013-04-27  4:12   ` Lance Lassetter
@ 2013-04-28  1:12     ` Lance Lassetter
  2013-05-01 10:07       ` Lance Lassetter
  0 siblings, 1 reply; 22+ messages in thread
From: Lance Lassetter @ 2013-04-28  1:12 UTC (permalink / raw)
  To: Francois Romieu; +Cc: netdev

On Fri, Apr 26, 2013 at 11:12:33PM -0500, Lance Lassetter wrote:
> On Fri, Apr 26, 2013 at 10:50:18PM +0200, Francois Romieu wrote:
> > Lance Lassetter <lancelassetter@gmail.com> :
> > [...]
> > > the box serves as a network router so it is causing abundant network
> > > traffic problems.
> > > 
> > > any debugging i could help you with, please let me know.  also if there
> > > is a possible solution, please let me know.
> > 
> > Is it a regression and / or an Asus M5A97 system ?
> > 
> > The XID lines that the kernel printed when the r8169 module gets loaded
> > may help.
> > 
> > -- 
> > Ueimor
> 
> lance@annun10 ~$ dmesg | grep -i xid
> [    6.370821] r8169 0000:03:00.0 eth0: RTL8168c/8111c at 0xffffc90000c70000, 00
> :22:19:28:86:61, XID 1c4000c0 IRQ 45
> [    6.371103] r8169 0000:04:09.0 eth1: RTL8169sb/8110sb at 0xffffc90000c7ec00,
> 48:02:2a:07:90:45, XID 10000000 IRQ 20
> lance@annun10 ~$
> 
> i don't think it's a regression and it's a Dell XPS 625 with an addon r8169 so there are two r8169 cards in the system.  it is a testing fedora repository system though with vanilla mainline kernel.
> 
> hope this helps,
> 
> lance

sorry for the lack of information thereof:

the conventional processor name is AMD Phenom(tm) II X4 940 Processor

i bought the computer back in like 2008, sorry.

it's an AMD 790FX motherboard chipset for eth0 (r8169i driver)

eth1 is a Roswell RC-404 PCI adapter (r8169 driver)

if regression means it didn't used to happen and now it's happening with a newer Linux OS/kernel then yes.  if regression means something different, i'm not sure.

i think it started with my installation of Fedora 18 which began with kernel 3.6 or 3.7, i really can't remember. it might have started with kernel 3.8.

before then all was OK.

hope this helps.

Lance Lassetter

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: r8169 with 3.9.0-rc9
  2013-04-28  1:12     ` Lance Lassetter
@ 2013-05-01 10:07       ` Lance Lassetter
  2013-05-01 12:15         ` Francois Romieu
  0 siblings, 1 reply; 22+ messages in thread
From: Lance Lassetter @ 2013-05-01 10:07 UTC (permalink / raw)
  To: Francois Romieu; +Cc: netdev

On Sat, Apr 27, 2013 at 08:12:34PM -0500, Lance Lassetter wrote:
> On Fri, Apr 26, 2013 at 11:12:33PM -0500, Lance Lassetter wrote:
> > On Fri, Apr 26, 2013 at 10:50:18PM +0200, Francois Romieu wrote:
> > > Lance Lassetter <lancelassetter@gmail.com> :
> > > [...]
> > > > the box serves as a network router so it is causing abundant network
> > > > traffic problems.
> > > > 
> > > > any debugging i could help you with, please let me know.  also if there
> > > > is a possible solution, please let me know.
> > > 
> > > Is it a regression and / or an Asus M5A97 system ?
> > > 
> > > The XID lines that the kernel printed when the r8169 module gets loaded
> > > may help.
> > > 
> > > -- 
> > > Ueimor
> > 
> > lance@annun10 ~$ dmesg | grep -i xid
> > [    6.370821] r8169 0000:03:00.0 eth0: RTL8168c/8111c at 0xffffc90000c70000, 00
> > :22:19:28:86:61, XID 1c4000c0 IRQ 45
> > [    6.371103] r8169 0000:04:09.0 eth1: RTL8169sb/8110sb at 0xffffc90000c7ec00,
> > 48:02:2a:07:90:45, XID 10000000 IRQ 20
> > lance@annun10 ~$
> > 
> > i don't think it's a regression and it's a Dell XPS 625 with an addon r8169 so there are two r8169 cards in the system.  it is a testing fedora repository system though with vanilla mainline kernel.
> > 
> > hope this helps,
> > 
> > lance
> 
> sorry for the lack of information thereof:
> 
> the conventional processor name is AMD Phenom(tm) II X4 940 Processor
> 
> i bought the computer back in like 2008, sorry.
> 
> it's an AMD 790FX motherboard chipset for eth0 (r8169i driver)
> 
> eth1 is a Roswell RC-404 PCI adapter (r8169 driver)
> 
> if regression means it didn't used to happen and now it's happening with a newer Linux OS/kernel then yes.  if regression means something different, i'm not sure.
> 
> i think it started with my installation of Fedora 18 which began with kernel 3.6 or 3.7, i really can't remember. it might have started with kernel 3.8.
> 
> before then all was OK.
> 
> hope this helps.
> 
> Lance Lassetter

Ueimor,

Any luck with this?

Regards,

Lance

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: r8169 with 3.9.0-rc9
  2013-05-01 10:07       ` Lance Lassetter
@ 2013-05-01 12:15         ` Francois Romieu
  2013-05-01 21:28           ` Lance Lassetter
  0 siblings, 1 reply; 22+ messages in thread
From: Francois Romieu @ 2013-05-01 12:15 UTC (permalink / raw)
  To: Lance Lassetter; +Cc: netdev

Lance Lassetter <lancelassetter@gmail.com> :
[...]
> Any luck with this ?

This is not the usual AMD iommu + realtek NIC problem.

This is not the usual "I upgraded from 2.6 and my Realtek NIC stopped working".

This is not "recent Realtek NIC support is wet".

This is not an "old Realtek PCI NIC stopped working" only problem.

This is an AMD box.

May I assume that you used an up-to-date Fedora 17 before migrating to
Fedora 18 when it was published ?

-- 
Ueimor

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: r8169 with 3.9.0-rc9
  2013-05-01 12:15         ` Francois Romieu
@ 2013-05-01 21:28           ` Lance Lassetter
  2013-05-01 22:31             ` Francois Romieu
  0 siblings, 1 reply; 22+ messages in thread
From: Lance Lassetter @ 2013-05-01 21:28 UTC (permalink / raw)
  To: Francois Romieu; +Cc: netdev

On Wed, May 01, 2013 at 02:15:02PM +0200, Francois Romieu wrote:
> Lance Lassetter <lancelassetter@gmail.com> :
> [...]
> > Any luck with this ?
> 
> This is not the usual AMD iommu + realtek NIC problem.
> 
> This is not the usual "I upgraded from 2.6 and my Realtek NIC stopped working".
> 
> This is not "recent Realtek NIC support is wet".
> 
> This is not an "old Realtek PCI NIC stopped working" only problem.
> 
> This is an AMD box.
> 
> May I assume that you used an up-to-date Fedora 17 before migrating to
> Fedora 18 when it was published ?
> 
> -- 
> Ueimor

Ueimor,

Yes, it was an up to date Fedora 17.  I know this is probably redundant but I also tried Realtek firmware from a Debian Sid box onto the Fedora 18 using testing repos with vanilla stable kernel to the same result.

Should I file a Red Hat bug?  Manually change IRQs, what do you think?

Regards,

Lance

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: r8169 with 3.9.0-rc9
  2013-05-01 21:28           ` Lance Lassetter
@ 2013-05-01 22:31             ` Francois Romieu
  2013-05-02  2:18               ` Lance Lassetter
  2013-05-02  2:23               ` Lance Lassetter
  0 siblings, 2 replies; 22+ messages in thread
From: Francois Romieu @ 2013-05-01 22:31 UTC (permalink / raw)
  To: Lance Lassetter; +Cc: netdev

Lance Lassetter <lancelassetter@gmail.com> :
[...]
> Yes, it was an up to date Fedora 17.  I know this is probably redundant but
> I also tried Realtek firmware from a Debian Sid box onto the Fedora 18
> using testing repos with vanilla stable kernel to the same result.
> 
> Should I file a Red Hat bug ?

Not yet.

> Manually change IRQs, what do you think?

I need the version of the last known working Fedora 17 kernel or
your Fedora 18 install date if you can't retrieve it.

A complete dmesg and the content of /proc/interrupts will be welcome.

Thanks.

-- 
Ueimor

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: r8169 with 3.9.0-rc9
  2013-05-01 22:31             ` Francois Romieu
@ 2013-05-02  2:18               ` Lance Lassetter
  2013-05-02 22:18                 ` Francois Romieu
  2013-05-02  2:23               ` Lance Lassetter
  1 sibling, 1 reply; 22+ messages in thread
From: Lance Lassetter @ 2013-05-02  2:18 UTC (permalink / raw)
  To: Francois Romieu; +Cc: netdev

[-- Attachment #1: Type: text/plain, Size: 915 bytes --]

On Thu, May 02, 2013 at 12:31:55AM +0200, Francois Romieu wrote:
> Lance Lassetter <lancelassetter@gmail.com> :
> [...]
> > Yes, it was an up to date Fedora 17.  I know this is probably redundant but
> > I also tried Realtek firmware from a Debian Sid box onto the Fedora 18
> > using testing repos with vanilla stable kernel to the same result.
> > 
> > Should I file a Red Hat bug ?
> 
> Not yet.
> 
> > Manually change IRQs, what do you think?
> 
> I need the version of the last known working Fedora 17 kernel or
> your Fedora 18 install date if you can't retrieve it.
> 
> A complete dmesg and the content of /proc/interrupts will be welcome.
> 
> Thanks.
> 
> -- 
> Ueimor

Ueimor,

afaik, I think my last FC17 kernel was 3.8.8-100 and the Fedora 18 install date was the week of the Fedora 18 alpha release, afaik September of 2012.

Attached are /proc/interrupts and complete dmesg upon reboot.

HTH,

Lance

[-- Attachment #2: dmesg.aout.txt --]
[-- Type: text/plain, Size: 80264 bytes --]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.9.0-1.vanilla.mainline.knurd.1.fc18.x86_64 (mockbuild@buildvm-04.phx2.fedoraproject.org) (gcc version 4.7.2 20121109 (Red Hat 4.7.2-8) (GCC) ) #1 SMP Mon Apr 29 15:54:51 UTC 2013
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.9.0-1.vanilla.mainline.knurd.1.fc18.x86_64 root=UUID=f8be3722-4981-448e-9fba-bae666139bea ro rd.md=0 rd.lvm=0 rd.dm=0 SYSFONT=True KEYTABLE=us rd.luks=0 LANG=en_US.UTF-8 rhgb radeon.modeset=1 plymouth.enable=1
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfc4ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfc50000-0x00000000bfc5dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bfc5e000-0x00000000bfca7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfca8000-0x00000000bfcdffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bfcec000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: Dell Inc. XPS 625/0P927G, BIOS 1.0.1 12/10/2008
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000240000000 aka 9216M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbfc50 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fc3000, 0x01fc3fff] PGTABLE
[    0.000000] BRK [0x01fc4000, 0x01fc4fff] PGTABLE
[    0.000000] BRK [0x01fc5000, 0x01fc5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x23fe00000-0x23fffffff]
[    0.000000]  [mem 0x23fe00000-0x23fffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x23c000000-0x23fdfffff]
[    0.000000]  [mem 0x23c000000-0x23fdfffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
[    0.000000]  [mem 0x200000000-0x23bffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbfc4ffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xbfbfffff] page 2M
[    0.000000]  [mem 0xbfc00000-0xbfc4ffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[    0.000000]  [mem 0x100000000-0x1ffffffff] page 1G
[    0.000000] RAMDISK: [mem 0x359e2000-0x36ce8fff]
[    0.000000] ACPI: RSDP 00000000000fa1d0 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 00000000bfc50000 00044 (v01 DELL    MC09    20081210 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000bfc50200 00084 (v01 121008 FACP1641 20081210 MSFT 00000097)
[    0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130117/tbfadt-599)
[    0.000000] ACPI: DSDT 00000000bfc50640 098BA (v01  D2C50 D2C50A01 00000A01 INTL 20051117)
[    0.000000] ACPI: FACS 00000000bfc5e000 00040
[    0.000000] ACPI: APIC 00000000bfc50390 0006C (v01 121008 APIC1641 20081210 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000bfc50400 0003C (v01 121008 OEMMCFG  20081210 MSFT 00000097)
[    0.000000] ACPI: SLIC 00000000bfc50440 00176 (v01 DELL    MC09    20081210 MSFT 00000097)
[    0.000000] ACPI: OSFR 00000000bfc505c0 0007C (v01 DELL   MC09     20081210 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000bfc5e040 00072 (v01 121008 OEMB1641 20081210 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000bfc59f00 00038 (v01 121008 OEMHPET  20081210 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000bfc59f40 0088C (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x23fffffff]
[    0.000000]   NODE_DATA [mem 0x23ffea000-0x23fffdfff]
[    0.000000]  [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x23fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xbfc4ffff]
[    0.000000]   node   0: [mem 0x100000000-0x23fffffff]
[    0.000000] On node 0 totalpages: 2096110
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12210 pages used for memmap
[    0.000000]   DMA32 zone: 781392 pages, LIFO batch:31
[    0.000000]   Normal zone: 20480 pages used for memmap
[    0.000000]   Normal zone: 1310720 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[    0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bfc50000 - 00000000bfc5e000
[    0.000000] PM: Registered nosave memory: 00000000bfc5e000 - 00000000bfca8000
[    0.000000] PM: Registered nosave memory: 00000000bfca8000 - 00000000bfce0000
[    0.000000] PM: Registered nosave memory: 00000000bfce0000 - 00000000bfcec000
[    0.000000] PM: Registered nosave memory: 00000000bfcec000 - 00000000c0000000
[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000ffe00000
[    0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[    0.000000] e820: [mem 0xc0000000-0xffdfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023fc00000 s85248 r8192 d21248 u524288
[    0.000000] pcpu-alloc: s85248 r8192 d21248 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2063335
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.9.0-1.vanilla.mainline.knurd.1.fc18.x86_64 root=UUID=f8be3722-4981-448e-9fba-bae666139bea ro rd.md=0 rd.lvm=0 rd.dm=0 SYSFONT=True KEYTABLE=us rd.luks=0 LANG=en_US.UTF-8 rhgb radeon.modeset=1 plymouth.enable=1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ b4000000 size 32 MB
[    0.000000] Aperture pointing to e820 RAM. Ignoring.
[    0.000000] Your BIOS doesn't leave a aperture memory hole
[    0.000000] Please enable the IOMMU option in the BIOS setup
[    0.000000] This costs you 64 MB of RAM
[    0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[    0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
[    0.000000] Memory: 8085368k/9437184k available (6549k kernel code, 1052744k absent, 299072k reserved, 6687k data, 1348k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] NR_IRQS:8448 nr_irqs:712 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 33554432 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.001000] tsc: Fast TSC calibration using PIT
[    0.002000] tsc: Detected 3000.222 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.44 BogoMIPS (lpj=3000222)
[    0.000008] pid_max: default: 32768 minimum: 301
[    0.000038] Security Framework initialized
[    0.000046] SELinux:  Initializing.
[    0.000055] SELinux:  Starting in permissive mode
[    0.000651] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.003340] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.004556] Mount-cache hash table entries: 256
[    0.004757] Initializing cgroup subsys cpuacct
[    0.004761] Initializing cgroup subsys memory
[    0.004773] Initializing cgroup subsys devices
[    0.004776] Initializing cgroup subsys freezer
[    0.004779] Initializing cgroup subsys net_cls
[    0.004782] Initializing cgroup subsys blkio
[    0.004785] Initializing cgroup subsys perf_event
[    0.004811] tseg: 0000000000
[    0.004817] CPU: Physical Processor ID: 0
[    0.004820] CPU: Processor Core ID: 0
[    0.004822] mce: CPU supports 6 MCE banks
[    0.004829] LVT offset 0 assigned for vector 0xf9
[    0.004835] process: using AMD E400 aware idle routine
[    0.004839] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
tlb_flushall_shift: 4
[    0.004912] Freeing SMP alternatives: 24k freed
[    0.005624] ACPI: Core revision 20130117
[    0.007525] ACPI: All ACPI Tables successfully acquired
[    0.009628] ftrace: allocating 24459 entries in 96 pages
[    0.019228] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.029226] smpboot: CPU0: AMD Phenom(tm) II X4 940 Processor (fam: 10, model: 04, stepping: 02)
[    0.130603] Performance Events: AMD PMU driver.
[    0.130608] ... version:                0
[    0.130610] ... bit width:              48
[    0.130612] ... generic registers:      4
[    0.130613] ... value mask:             0000ffffffffffff
[    0.130615] ... max period:             00007fffffffffff
[    0.130617] ... fixed-purpose events:   0
[    0.130619] ... event mask:             000000000000000f
[    0.131660] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.131743] smpboot: Booting Node   0, Processors  #1 #2 #3 OK
[    0.171223] Brought up 4 CPUs
[    0.171226] smpboot: Total of 4 processors activated (24001.77 BogoMIPS)
[    0.176213] devtmpfs: initialized
[    0.176422] PM: Registering ACPI NVS region [mem 0xbfc5e000-0xbfca7fff] (303104 bytes)
[    0.177196] atomic64 test passed for x86-64 platform with CX8 and with SSE
[    0.177222] RTC time: 15:20:55, date: 05/01/13
[    0.177266] NET: Registered protocol family 16
[    0.177373] node 0 link 0: io port [1000, ffffff]
[    0.177376] TOM: 00000000c0000000 aka 3072M
[    0.177379] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.177381] node 0 link 0: mmio [e0000000, efffffff] ==> none
[    0.177383] node 0 link 0: mmio [f0000000, ffffffff]
[    0.177385] node 0 link 0: mmio [a0000, bffff]
[    0.177386] node 0 link 0: mmio [c0000000, dfffffff]
[    0.177388] TOM2: 0000000240000000 aka 9216M
[    0.177391] bus: [bus 00-07] on node 0 link 0
[    0.177392] bus: 00 [io  0x0000-0xffff]
[    0.177393] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.177394] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.177395] bus: 00 [mem 0xc0000000-0xdfffffff]
[    0.177396] bus: 00 [mem 0x240000000-0xfcffffffff]
[    0.177466] ACPI: bus type PCI registered
[    0.177514] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.177518] PCI: not using MMCONFIG
[    0.177520] PCI: Using configuration type 1 for base access
[    0.177522] PCI: Using configuration type 1 for extended access
[    0.177648] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.177651] mtrr: probably your BIOS does not setup all CPUs.
[    0.177652] mtrr: corrected configuration.
[    0.178250] bio: create slab <bio-0> at 0
[    0.178318] ACPI: Added _OSI(Module Device)
[    0.178321] ACPI: Added _OSI(Processor Device)
[    0.178325] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.178328] ACPI: Added _OSI(Processor Aggregator Device)
[    0.178846] ACPI: EC: Look up EC in DSDT
[    0.179576] ACPI: Executed 4 blocks of module-level executable AML code
[    0.184723] ACPI: Interpreter enabled
[    0.184732] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
[    0.184738] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[    0.184750] ACPI: (supports S0 S3 S4 S5)
[    0.184752] ACPI: Using IOAPIC for interrupt routing
[    0.184776] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.185228] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.192944] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.225153] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.225272] PCI host bridge to bus 0000:00
[    0.225277] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.225280] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.225283] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.225287] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.225290] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[    0.225293] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[    0.225296] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[    0.225307] pci 0000:00:00.0: [1002:5958] type 00 class 0x060000
[    0.225318] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[    0.225371] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
[    0.225401] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.225415] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.225444] pci 0000:00:03.0: [1002:5979] type 01 class 0x060400
[    0.225473] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.225489] pci 0000:00:03.0: System wakeup disabled by ACPI
[    0.225524] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
[    0.225553] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.225570] pci 0000:00:0a.0: System wakeup disabled by ACPI
[    0.225607] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[    0.225625] pci 0000:00:11.0: reg 10: [io  0xa000-0xa007]
[    0.225634] pci 0000:00:11.0: reg 14: [io  0x9000-0x9003]
[    0.225644] pci 0000:00:11.0: reg 18: [io  0x8000-0x8007]
[    0.225653] pci 0000:00:11.0: reg 1c: [io  0x7000-0x7003]
[    0.225662] pci 0000:00:11.0: reg 20: [io  0x6000-0x600f]
[    0.225671] pci 0000:00:11.0: reg 24: [mem 0xfe7ffc00-0xfe7fffff]
[    0.225691] pci 0000:00:11.0: set SATA to AHCI mode
[    0.225772] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.225785] pci 0000:00:12.0: reg 10: [mem 0xfe7fe000-0xfe7fefff]
[    0.225858] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.225883] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[    0.225896] pci 0000:00:12.1: reg 10: [mem 0xfe7fd000-0xfe7fdfff]
[    0.225970] pci 0000:00:12.1: System wakeup disabled by ACPI
[    0.226001] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.226019] pci 0000:00:12.2: reg 10: [mem 0xfe7ff800-0xfe7ff8ff]
[    0.226099] pci 0000:00:12.2: supports D1 D2
[    0.226101] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.226129] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.226160] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.226173] pci 0000:00:13.0: reg 10: [mem 0xfe7fc000-0xfe7fcfff]
[    0.226249] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.226274] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[    0.226286] pci 0000:00:13.1: reg 10: [mem 0xfe7fb000-0xfe7fbfff]
[    0.226363] pci 0000:00:13.1: System wakeup disabled by ACPI
[    0.226393] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.226411] pci 0000:00:13.2: reg 10: [mem 0xfe7ff400-0xfe7ff4ff]
[    0.226491] pci 0000:00:13.2: supports D1 D2
[    0.226493] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.226526] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.226560] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.226682] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[    0.226698] pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
[    0.226707] pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
[    0.226715] pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
[    0.226724] pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
[    0.226733] pci 0000:00:14.1: reg 20: [io  0xff00-0xff0f]
[    0.226818] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.226919] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.226970] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.226999] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.227011] pci 0000:00:14.5: reg 10: [mem 0xfe7fa000-0xfe7fafff]
[    0.227091] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.227119] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.227166] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.227209] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.227253] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.227300] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.227392] pci 0000:01:00.0: [1002:9440] type 00 class 0x030000
[    0.227404] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.227413] pci 0000:01:00.0: reg 18: [mem 0xfe8f0000-0xfe8fffff 64bit]
[    0.227420] pci 0000:01:00.0: reg 20: [io  0xb000-0xb0ff]
[    0.227431] pci 0000:01:00.0: reg 30: [mem 0xfe8c0000-0xfe8dffff pref]
[    0.227459] pci 0000:01:00.0: supports D1 D2
[    0.227491] pci 0000:01:00.1: [1002:aa30] type 00 class 0x040300
[    0.227502] pci 0000:01:00.1: reg 10: [mem 0xfe8ec000-0xfe8effff 64bit]
[    0.227557] pci 0000:01:00.1: supports D1 D2
[    0.229531] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.229538] pci 0000:00:02.0:   bridge window [io  0xb000-0xbfff]
[    0.229541] pci 0000:00:02.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.229544] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.229589] pci 0000:02:00.0: [1002:9440] type 00 class 0x030000
[    0.229604] pci 0000:02:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.229616] pci 0000:02:00.0: reg 18: [mem 0xfe9f0000-0xfe9fffff 64bit]
[    0.229623] pci 0000:02:00.0: reg 20: [io  0xc000-0xc0ff]
[    0.229637] pci 0000:02:00.0: reg 30: [mem 0xfe9c0000-0xfe9dffff pref]
[    0.229673] pci 0000:02:00.0: supports D1 D2
[    0.229714] pci 0000:02:00.1: [1002:aa30] type 00 class 0x040300
[    0.229728] pci 0000:02:00.1: reg 10: [mem 0xfe9ec000-0xfe9effff 64bit]
[    0.229792] pci 0000:02:00.1: supports D1 D2
[    0.231529] pci 0000:00:03.0: PCI bridge to [bus 02]
[    0.231536] pci 0000:00:03.0:   bridge window [io  0xc000-0xcfff]
[    0.231538] pci 0000:00:03.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.231541] pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.231593] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.231605] pci 0000:03:00.0: reg 10: [io  0xd800-0xd8ff]
[    0.231625] pci 0000:03:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[    0.231637] pci 0000:03:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
[    0.231646] pci 0000:03:00.0: reg 30: [mem 0xfeaf0000-0xfeafffff pref]
[    0.231691] pci 0000:03:00.0: supports D1 D2
[    0.231693] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.233530] pci 0000:00:0a.0: PCI bridge to [bus 03]
[    0.233537] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
[    0.233539] pci 0000:00:0a.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.233542] pci 0000:00:0a.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.233587] pci 0000:04:05.0: [11c1:5811] type 00 class 0x0c0010
[    0.233608] pci 0000:04:05.0: reg 10: [mem 0xfebff000-0xfebfffff]
[    0.233702] pci 0000:04:05.0: supports D1 D2
[    0.233704] pci 0000:04:05.0: PME# supported from D0 D1 D2 D3hot
[    0.233753] pci 0000:04:09.0: [10ec:8169] type 00 class 0x020000
[    0.233774] pci 0000:04:09.0: reg 10: [io  0xe800-0xe8ff]
[    0.233788] pci 0000:04:09.0: reg 14: [mem 0xfebfec00-0xfebfecff]
[    0.233841] pci 0000:04:09.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
[    0.233875] pci 0000:04:09.0: supports D1 D2
[    0.233876] pci 0000:04:09.0: PME# supported from D1 D2 D3hot D3cold
[    0.233936] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[    0.233941] pci 0000:00:14.4:   bridge window [io  0xe000-0xefff]
[    0.233945] pci 0000:00:14.4:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.233949] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.233951] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.233953] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.233954] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.233956] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[    0.233958] pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[    0.233971] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.233978] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.245566] ACPI: PCI Interrupt Link [LNKA] (IRQs *4 7 10 11 12 14 15)
[    0.245605] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
[    0.245639] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[    0.245671] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
[    0.245703] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 *10 11 12 14 15)
[    0.245737] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.245771] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 *7 10 11 12 14 15)
[    0.245804] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 *11 12 14 15)
[    0.245918] acpi root: \_SB_.PCI0 notify handler is installed
[    0.245940] Found 1 acpi root devices
[    0.246004] ACPI: No dock devices found.
[    0.246069] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.246074] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
[    0.246078] vgaarb: loaded
[    0.246079] vgaarb: bridge control possible 0000:02:00.0
[    0.246081] vgaarb: bridge control possible 0000:01:00.0
[    0.246138] SCSI subsystem initialized
[    0.246141] ACPI: bus type ATA registered
[    0.246189] libata version 3.00 loaded.
[    0.246205] ACPI: bus type USB registered
[    0.246218] usbcore: registered new interface driver usbfs
[    0.246227] usbcore: registered new interface driver hub
[    0.246248] usbcore: registered new device driver usb
[    0.246294] PCI: Using ACPI for IRQ routing
[    0.254744] PCI: pci_cache_line_size set to 64 bytes
[    0.254750] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[    0.254812] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.254813] e820: reserve RAM buffer [mem 0xbfc50000-0xbfffffff]
[    0.254883] NetLabel: Initializing
[    0.254885] NetLabel:  domain hash size = 128
[    0.254887] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.254899] NetLabel:  unlabeled traffic allowed by default
[    0.254950] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.254954] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.256978] Switching to clocksource hpet
[    0.261357] pnp: PnP ACPI init
[    0.261371] ACPI: bus type PNP registered
[    0.261407] pnp 00:00: [dma 4]
[    0.261425] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.261453] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.261468] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.261488] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.261654] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.261735] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.261739] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.261743] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.261885] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.261889] system 00:06: [io  0x040b] has been reserved
[    0.261892] system 00:06: [io  0x04d6] has been reserved
[    0.261895] system 00:06: [io  0x0c00-0x0c01] has been reserved
[    0.261898] system 00:06: [io  0x0c14] has been reserved
[    0.261900] system 00:06: [io  0x0c50-0x0c51] has been reserved
[    0.261903] system 00:06: [io  0x0c52] has been reserved
[    0.261906] system 00:06: [io  0x0c6c] has been reserved
[    0.261909] system 00:06: [io  0x0c6f] has been reserved
[    0.261912] system 00:06: [io  0x0cd0-0x0cd1] has been reserved
[    0.261915] system 00:06: [io  0x0cd2-0x0cd3] has been reserved
[    0.261918] system 00:06: [io  0x0cd4-0x0cd5] has been reserved
[    0.261920] system 00:06: [io  0x0cd6-0x0cd7] has been reserved
[    0.261923] system 00:06: [io  0x0cd8-0x0cdf] has been reserved
[    0.261926] system 00:06: [io  0x0800-0x089f] has been reserved
[    0.261929] system 00:06: [io  0x0b00-0x0b0f] has been reserved
[    0.261932] system 00:06: [io  0x0b20-0x0b3f] has been reserved
[    0.261935] system 00:06: [io  0x0900-0x090f] has been reserved
[    0.261938] system 00:06: [io  0x0910-0x091f] has been reserved
[    0.261941] system 00:06: [io  0xfe00-0xfefe] has been reserved
[    0.261945] system 00:06: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.261948] system 00:06: [mem 0xfec10000-0xfec1001f] has been reserved
[    0.261951] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.262089] system 00:07: [io  0x0e00-0x0e0f] has been reserved
[    0.262093] system 00:07: [io  0x0e80-0x0e8f] has been reserved
[    0.262096] system 00:07: [io  0x0f40-0x0f4f] has been reserved
[    0.262099] system 00:07: [io  0x0a30-0x0a3f] has been reserved
[    0.262102] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.262149] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    0.262153] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.282087] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.282094] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.282099] pnp 00:09: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.282103] pnp 00:09: disabling [mem 0x00100000-0xbfffffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.282139] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.282144] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.282212] pnp: PnP ACPI: found 10 devices
[    0.282215] ACPI: bus type PNP unregistered
[    0.288529] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.288534] pci 0000:00:02.0:   bridge window [io  0xb000-0xbfff]
[    0.288538] pci 0000:00:02.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.288542] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.288547] pci 0000:00:03.0: PCI bridge to [bus 02]
[    0.288550] pci 0000:00:03.0:   bridge window [io  0xc000-0xcfff]
[    0.288553] pci 0000:00:03.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.288557] pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.288562] pci 0000:00:0a.0: PCI bridge to [bus 03]
[    0.288564] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
[    0.288568] pci 0000:00:0a.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.288572] pci 0000:00:0a.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.288576] pci 0000:00:14.4: PCI bridge to [bus 04]
[    0.288580] pci 0000:00:14.4:   bridge window [io  0xe000-0xefff]
[    0.288586] pci 0000:00:14.4:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.288746] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.288747] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.288749] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.288751] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.288752] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[    0.288754] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.288755] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.288757] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.288759] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.288760] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    0.288762] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.288763] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.288765] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.288766] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.288768] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.288770] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    0.288771] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.288773] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.288774] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.288776] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.288777] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[    0.288779] pci_bus 0000:04: resource 8 [mem 0xc0000000-0xdfffffff]
[    0.288781] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.288815] NET: Registered protocol family 2
[    0.289017] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.289396] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.289709] TCP: Hash tables configured (established 65536 bind 65536)
[    0.289752] TCP: reno registered
[    0.289765] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.289822] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.289920] NET: Registered protocol family 1
[    0.652721] pci 0000:01:00.0: Boot video device
[    0.652737] PCI: CLS 64 bytes, default 64
[    0.652777] Unpacking initramfs...
[    0.942529] Freeing initrd memory: 19484k freed
[    0.948697] PCI-DMA: Disabling AGP.
[    0.949953] PCI-DMA: aperture base @ b4000000 size 65536 KB
[    0.949955] PCI-DMA: using GART IOMMU.
[    0.949959] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.954268] LVT offset 1 assigned for vector 0x400
[    0.954281] IBS: LVT offset 1 assigned
[    0.954307] perf: AMD IBS detected (0x0000001f)
[    0.954762] Initialise module verification
[    0.954797] audit: initializing netlink socket (disabled)
[    0.954810] type=2000 audit(1367421655.843:1): initialized
[    0.974638] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.976095] VFS: Disk quotas dquot_6.5.2
[    0.976133] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.976461] msgmni has been set to 15958
[    0.976508] SELinux:  Registering netfilter hooks
[    0.977102] alg: No test for stdrng (krng)
[    0.977116] NET: Registered protocol family 38
[    0.977121] Key type asymmetric registered
[    0.977124] Asymmetric key parser 'x509' registered
[    0.977148] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.977177] io scheduler noop registered
[    0.977179] io scheduler deadline registered
[    0.977187] io scheduler cfq registered (default)
[    0.977297] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[    0.977358] pcieport 0000:00:03.0: irq 41 for MSI/MSI-X
[    0.977408] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
[    0.977456] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.977469] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.977472] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.977580] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[    0.977583] vesafb: scrolling: redraw
[    0.977585] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.977799] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010f00000, using 5824k, total 5824k
[    1.001949] Console: switching to colour frame buffer device 175x65
[    1.024645] fb0: VESA VGA frame buffer device
[    1.024803] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.025007] ACPI: Power Button [PWRB]
[    1.025123] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.025309] ACPI: Power Button [PWRF]
[    1.048594] GHES: HEST is not enabled!
[    1.048748] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.049350] Non-volatile memory driver v1.3
[    1.049451] Linux agpgart interface v0.103
[    1.050135] loop: module loaded
[    1.050263] ahci 0000:00:11.0: version 3.0
[    1.050421] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.050619] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
[    1.051229] scsi0 : ahci
[    1.051359] scsi1 : ahci
[    1.051465] scsi2 : ahci
[    1.051569] scsi3 : ahci
[    1.051653] ata1: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00 irq 22
[    1.051833] ata2: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80 irq 22
[    1.052013] ata3: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe00 irq 22
[    1.052192] ata4: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe80 irq 22
[    1.052470] libphy: Fixed MDIO Bus: probed
[    1.052633] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.052791] ehci-pci: EHCI PCI platform driver
[    1.052975] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.053156] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.053349] QUIRK: Enable AMD PLL fix
[    1.053351] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.053561] ehci-pci 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[    1.053753] ehci-pci 0000:00:12.2: debug port 1
[    1.053898] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe7ff800
[    1.059268] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.059431] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.059595] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.059770] usb usb1: Product: EHCI Host Controller
[    1.059887] usb usb1: Manufacturer: Linux 3.9.0-1.vanilla.mainline.knurd.1.fc18.x86_64 ehci_hcd
[    1.060097] usb usb1: SerialNumber: 0000:00:12.2
[    1.066175] hub 1-0:1.0: USB hub found
[    1.072119] hub 1-0:1.0: 6 ports detected
[    1.078191] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.084149] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.090088] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.096075] ehci-pci 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[    1.102010] ehci-pci 0000:00:13.2: debug port 1
[    1.107923] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe7ff400
[    1.119211] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.125113] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.131074] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.137014] usb usb2: Product: EHCI Host Controller
[    1.142875] usb usb2: Manufacturer: Linux 3.9.0-1.vanilla.mainline.knurd.1.fc18.x86_64 ehci_hcd
[    1.148909] usb usb2: SerialNumber: 0000:00:13.2
[    1.155039] hub 2-0:1.0: USB hub found
[    1.161091] hub 2-0:1.0: 6 ports detected
[    1.167213] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.173356] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    1.179429] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.185485] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe7fe000
[    1.246121] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.252187] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.258239] usb usb3: Product: OHCI Host Controller
[    1.264195] usb usb3: Manufacturer: Linux 3.9.0-1.vanilla.mainline.knurd.1.fc18.x86_64 ohci_hcd
[    1.270270] usb usb3: SerialNumber: 0000:00:12.0
[    1.276367] hub 3-0:1.0: USB hub found
[    1.282273] hub 3-0:1.0: 3 ports detected
[    1.288196] ohci_hcd 0000:00:12.1: OHCI Host Controller
[    1.294008] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[    1.299789] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe7fd000
[    1.357056] ata4: SATA link down (SStatus 0 SControl 300)
[    1.360009] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.360011] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.360012] usb usb4: Product: OHCI Host Controller
[    1.360013] usb usb4: Manufacturer: Linux 3.9.0-1.vanilla.mainline.knurd.1.fc18.x86_64 ohci_hcd
[    1.360013] usb usb4: SerialNumber: 0000:00:12.1
[    1.376017] hub 4-0:1.0: USB hub found
[    1.376023] hub 4-0:1.0: 3 ports detected
[    1.376165] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    1.376206] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.376231] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe7fc000
[    1.421270] ata1: SATA link down (SStatus 0 SControl 300)
[    1.431365] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.437543] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.443814] usb usb5: Product: OHCI Host Controller
[    1.450014] usb usb5: Manufacturer: Linux 3.9.0-1.vanilla.mainline.knurd.1.fc18.x86_64 ohci_hcd
[    1.456341] usb usb5: SerialNumber: 0000:00:13.0
[    1.462699] hub 5-0:1.0: USB hub found
[    1.468955] hub 5-0:1.0: 3 ports detected
[    1.475290] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    1.481558] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[    1.487853] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe7fb000
[    1.548831] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.555165] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.561550] usb usb6: Product: OHCI Host Controller
[    1.567879] usb usb6: Manufacturer: Linux 3.9.0-1.vanilla.mainline.knurd.1.fc18.x86_64 ohci_hcd
[    1.574355] usb usb6: SerialNumber: 0000:00:13.1
[    1.577788] ata3: softreset failed (device not ready)
[    1.577791] ata3: applying PMP SRST workaround and retrying
[    1.579792] ata2: softreset failed (device not ready)
[    1.579795] ata2: applying PMP SRST workaround and retrying
[    1.606162] hub 6-0:1.0: USB hub found
[    1.612512] hub 6-0:1.0: 3 ports detected
[    1.618935] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    1.625306] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[    1.631676] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe7fa000
[    1.692698] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.699101] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.705550] usb usb7: Product: OHCI Host Controller
[    1.711933] usb usb7: Manufacturer: Linux 3.9.0-1.vanilla.mainline.knurd.1.fc18.x86_64 ohci_hcd
[    1.718471] usb usb7: SerialNumber: 0000:00:14.5
[    1.725034] hub 7-0:1.0: USB hub found
[    1.731417] hub 7-0:1.0: 2 ports detected
[    1.732662] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.733157] ata3.00: ATA-8: WDC WD2500HHTZ-04N21V0, 04.06A00, max UDMA/133
[    1.733159] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.733636] ata3.00: configured for UDMA/133
[    1.734653] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.735728] ata2.00: ATAPI: Optiarc DVD+/-RW AD-7200S, 101A, max UDMA/100
[    1.737111] ata2.00: configured for UDMA/100
[    1.739327] scsi 1:0:0:0: CD-ROM            Optiarc  DVD+-RW AD-7200S 101A PQ: 0 ANSI: 5
[    1.741476] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.741477] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.741577] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.741647] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    1.741812] scsi 2:0:0:0: Direct-Access     ATA      WDC WD2500HHTZ-0 04.0 PQ: 0 ANSI: 5
[    1.741918] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.741935] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.741936] sd 2:0:0:0: [sda] 4096-byte physical blocks
[    1.742040] sd 2:0:0:0: [sda] Write Protect is off
[    1.742042] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.742079] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.754242]  sda: sda1 sda2 sda3 sda4
[    1.754660] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.861727] uhci_hcd: USB Universal Host Controller Interface driver
[    1.868441] usbcore: registered new interface driver usbserial
[    1.875058] usbcore: registered new interface driver usbserial_generic
[    1.881599] usbserial: USB Serial support registered for generic
[    1.888190] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.895243] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.901908] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.908581] mousedev: PS/2 mouse device common for all mice
[    1.915355] rtc_cmos 00:01: RTC can wake from S4
[    1.922066] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.928666] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.935344] device-mapper: uevent: version 1.0.3
[    1.941975] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    1.948646] cpuidle: using governor ladder
[    1.953440] tsc: Refined TSC clocksource calibration: 3000.106 MHz
[    1.953443] Switching to clocksource tsc
[    1.968474] cpuidle: using governor menu
[    1.975241] EFI Variables Facility v0.08 2004-May-17
[    1.979397] usb 3-2: new low-speed USB device number 2 using ohci_hcd
[    1.988591] hidraw: raw HID events driver (C) Jiri Kosina
[    1.995318] usbcore: registered new interface driver usbhid
[    2.001996] usbhid: USB HID core driver
[    2.008638] drop_monitor: Initializing network drop monitor service
[    2.015329] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.021943] TCP: cubic registered
[    2.028475] Initializing XFRM netlink socket
[    2.035093] NET: Registered protocol family 10
[    2.041763] mip6: Mobile IPv6
[    2.048251] NET: Registered protocol family 17
[    2.054977] PM: Hibernation image not present or could not be loaded.
[    2.054979] Loading module verification certificates
[    2.062446] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 603be477f418623c1e76f05597d05e33735b0d80'
[    2.069238] registered taskstats version 1
[    2.076672]   Magic number: 13:927:334
[    2.083403] tty tty55: hash matches
[    2.090046] ohci_hcd 0000:00:13.0: hash matches
[    2.097625] Freeing unused kernel memory: 1348k freed
[    2.104597] Write protecting the kernel read-only data: 12288k
[    2.114575] Freeing unused kernel memory: 1632k freed
[    2.122330] usb 3-2: New USB device found, idVendor=046d, idProduct=c063
[    2.128952] Freeing unused kernel memory: 1328k freed
[    2.128959] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.128960] usb 3-2: Product: DELL USB Laser Mouse
[    2.128961] usb 3-2: Manufacturer: DELL
[    2.137495] input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input2
[    2.137578] hid-generic 0003:046D:C063.0001: input,hidraw0: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:12.0-2/input0
[    2.172873] systemd[1]: systemd 201 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    2.180156] systemd[1]: Running in initial RAM disk.
[    2.208565] systemd[1]: No hostname configured.
[    2.215663] systemd[1]: Set hostname to <localhost>.
[    2.222789] systemd[1]: Initializing machine ID from random generator.
[    2.235300] systemd[1]: Cannot add dependency job for unit timers.target, ignoring: Unit timers.target failed to load: No such file or directory. See system logs and 'systemctl status timers.target' for details.
[    2.250046] systemd[1]: Cannot add dependency job for unit paths.target, ignoring: Unit paths.target failed to load: No such file or directory. See system logs and 'systemctl status paths.target' for details.
[    2.265767] systemd[1]: Starting Encrypted Volumes.
[    2.281490] systemd[1]: Reached target Encrypted Volumes.
[    2.289362] systemd[1]: Starting udev Kernel Socket.
[    2.305090] systemd[1]: Listening on udev Kernel Socket.
[    2.312973] systemd[1]: Starting udev Control Socket.
[    2.328605] systemd[1]: Listening on udev Control Socket.
[    2.336481] systemd[1]: Starting Journal Socket.
[    2.352185] systemd[1]: Listening on Journal Socket.
[    2.360167] systemd[1]: Started Load Kernel Modules.
[    2.367991] systemd[1]: Starting Journal Service...
[    2.378019] usb 5-2: new full-speed USB device number 2 using ohci_hcd
[    2.400354] systemd-journald[70]: Failed to resolve 'systemd-journal' group: No such process
[    2.413303] systemd[1]: Started Journal Service.
[    2.421263] systemd[1]: Starting Sockets.
[    2.436846] systemd[1]: Reached target Sockets.
[    2.444596] systemd[1]: Starting dracut cmdline hook...
[    2.460437] systemd[1]: Starting Swap.
[    2.475797] systemd[1]: Reached target Swap.
[    2.483434] systemd[1]: Starting Local File Systems.
[    2.507351] systemd[1]: Reached target Local File Systems.
[    2.530390] usb 5-2: New USB device found, idVendor=0955, idProduct=000a
[    2.530392] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.530393] usb 5-2: Product: ESA FW Update
[    2.530394] usb 5-2: Manufacturer: NVIDIA
[    2.565137] systemd[1]: Started dracut cmdline hook.
[    2.565468] hid-generic 0003:0955:000A.0002: item 0 1 0 8 parsing failed
[    2.565478] hid-generic: probe of 0003:0955:000A.0002 failed with error -22
[    2.589899] systemd[1]: Starting Setup Virtual Console...
[    2.606745] systemd[1]: Starting dracut pre-udev hook...
[    2.658472] systemd-udevd[122]: starting version 201
[    2.677743] usb 4-2: new low-speed USB device number 2 using ohci_hcd
[    2.765645] wmi: module verification failed: signature and/or required key missing - tainting kernel
[    2.765889] wmi: Mapper loaded
[    2.768567] [drm] Initialized drm 1.1.0 20060810
[    2.772275] [drm] radeon kernel modesetting enabled.
[    2.772333] checking generic (c0000000 5b0000) vs hw (c0000000 10000000)
[    2.772334] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[    2.787968] pata_atiixp 0000:00:14.1: setting latency timer to 64
[    2.809002] Console: switching to colour dummy device 80x25
[    2.809028] scsi4 : pata_atiixp
[    2.809475] scsi5 : pata_atiixp
[    2.809678] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    2.809687] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    2.810085] [drm] initializing kernel modesetting (RV770 0x1002:0x9440 0x1002:0x0502).
[    2.810099] [drm] register mmio base: 0xFE8F0000
[    2.810101] [drm] register mmio size: 65536
[    2.810890] ATOM BIOS: Wekiva
[    2.810920] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    2.810925] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[    2.815556] [drm] Detected VRAM RAM=1024M, BAR=256M
[    2.815566] [drm] RAM width 256bits DDR
[    2.816040] [TTM] Zone  kernel: Available graphics memory: 4087568 kiB
[    2.816044] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    2.816046] [TTM] Initializing pool allocator
[    2.816051] [TTM] Initializing DMA pool allocator
[    2.816079] [drm] radeon: 1024M of VRAM memory ready
[    2.816082] [drm] radeon: 512M of GTT memory ready.
[    2.816097] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.816100] [drm] Driver supports precise vblank timestamp query.
[    2.816144] radeon 0000:01:00.0: irq 43 for MSI/MSI-X
[    2.816154] radeon 0000:01:00.0: radeon: using MSI.
[    2.816182] [drm] radeon: irq initialized.
[    2.816188] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    2.817016] [drm] probing gen 2 caps for device 1002:5978 = 300c82/0
[    2.817020] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    2.817096] [drm] Loading RV770 Microcode
[    2.827685] usb 4-2: New USB device found, idVendor=046d, idProduct=c31c
[    2.827694] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.827697] usb 4-2: Product: USB Keyboard
[    2.827700] usb 4-2: Manufacturer: Logitech
[    2.837765] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[    2.837810] radeon 0000:01:00.0: WB enabled
[    2.837814] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88022f17bc00
[    2.837819] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88022f17bc0c
[    2.838878] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input3
[    2.838963] hid-generic 0003:046D:C31C.0003: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:12.1-2/input0
[    2.852707] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.1/input/input4
[    2.852779] hid-generic 0003:046D:C31C.0004: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:12.1-2/input1
[    2.884075] firewire_ohci 0000:04:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[    2.884094] [drm] ring test on 0 succeeded in 1 usecs
[    2.884154] [drm] ring test on 3 succeeded in 1 usecs
[    2.884261] [drm] ib test on ring 0 succeeded in 0 usecs
[    2.884275] [drm] ib test on ring 3 succeeded in 0 usecs
[    2.884441] [drm] Radeon Display Connectors
[    2.884443] [drm] Connector 0:
[    2.884445] [drm]   DVI-I-1
[    2.884447] [drm]   HPD2
[    2.884449] [drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[    2.884451] [drm]   Encoders:
[    2.884453] [drm]     DFP1: INTERNAL_UNIPHY
[    2.884456] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    2.884457] [drm] Connector 1:
[    2.884459] [drm]   DIN-1
[    2.884460] [drm]   Encoders:
[    2.884462] [drm]     TV1: INTERNAL_KLDSCP_DAC2
[    2.884464] [drm] Connector 2:
[    2.884465] [drm]   DVI-I-2
[    2.884467] [drm]   HPD1
[    2.884469] [drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[    2.884471] [drm]   Encoders:
[    2.884473] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.884475] [drm]     DFP2: INTERNAL_KLDSCP_LVTMA
[    2.884502] [drm] Internal thermal controller with fan control
[    2.884539] [drm] radeon: power management initialized
[    2.932448] [drm] fb mappable at 0xC0142000
[    2.932452] [drm] vram apper at 0xC0000000
[    2.932454] [drm] size 8294400
[    2.932456] [drm] fb depth is 24
[    2.932457] [drm]    pitch is 7680
[    2.932621] fbcon: radeondrmfb (fb0) is primary device
[    3.138339] Console: switching to colour frame buffer device 240x67
[    3.144833] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    3.144834] radeon 0000:01:00.0: registered panic notifier
[    3.144838] [drm] Initialized radeon 2.30.0 20080528 for 0000:01:00.0 on minor 0
[    3.144888] radeon 0000:02:00.0: enabling device (0000 -> 0003)
[    3.145080] [drm] initializing kernel modesetting (RV770 0x1002:0x9440 0x1002:0x0502).
[    3.145133] [drm] register mmio base: 0xFE9F0000
[    3.145158] [drm] register mmio size: 65536
[    3.260267] ATOM BIOS: Wekiva
[    3.260299] [drm] GPU not posted. posting now...
[    3.315312] radeon 0000:02:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    3.315357] radeon 0000:02:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[    3.319920] [drm] Detected VRAM RAM=1024M, BAR=256M
[    3.319958] [drm] RAM width 256bits DDR
[    3.320003] [drm] radeon: 1024M of VRAM memory ready
[    3.320029] [drm] radeon: 512M of GTT memory ready.
[    3.320078] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    3.320116] [drm] Driver supports precise vblank timestamp query.
[    3.320187] radeon 0000:02:00.0: irq 44 for MSI/MSI-X
[    3.320199] radeon 0000:02:00.0: radeon: using MSI.
[    3.320250] [drm] radeon: irq initialized.
[    3.320276] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    3.321051] [drm] probing gen 2 caps for device 1002:5979 = 1300c82/0
[    3.321086] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    3.321204] [drm] Loading RV770 Microcode
[    3.322957] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[    3.323037] radeon 0000:02:00.0: WB enabled
[    3.323060] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88022ead1c00
[    3.323130] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88022ead1c0c
[    3.369376] [drm] ring test on 0 succeeded in 1 usecs
[    3.369458] [drm] ring test on 3 succeeded in 1 usecs
[    3.369581] [drm] ib test on ring 0 succeeded in 0 usecs
[    3.369619] [drm] ib test on ring 3 succeeded in 0 usecs
[    3.369803] [drm] Radeon Display Connectors
[    3.369826] [drm] Connector 0:
[    3.369843] [drm]   DVI-I-3
[    3.369859] [drm]   HPD2
[    3.369874] [drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[    3.369912] [drm]   Encoders:
[    3.369929] [drm]     DFP1: INTERNAL_UNIPHY
[    3.369951] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    3.369976] [drm] Connector 1:
[    3.369992] [drm]   DIN-2
[    3.371226] [drm]   Encoders:
[    3.372482] [drm]     TV1: INTERNAL_KLDSCP_DAC2
[    3.373709] [drm] Connector 2:
[    3.374933] [drm]   DVI-I-4
[    3.376185] [drm]   HPD1
[    3.377429] [drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[    3.378719] [drm]   Encoders:
[    3.380008] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    3.381259] [drm]     DFP2: INTERNAL_KLDSCP_LVTMA
[    3.382529] [drm] Internal thermal controller with fan control
[    3.383828] [drm] radeon: power management initialized
[    3.387153] firewire_core 0000:04:05.0: created device fw0: GUID 001d098a52f70306, S400
[    3.405367] radeon 0000:02:00.0: No connectors reported connected with modes
[    3.406677] [drm] Cannot find any crtc or sizes - going 1024x768
[    3.409169] [drm] fb mappable at 0xD0142000
[    3.410538] [drm] vram apper at 0xD0000000
[    3.411913] [drm] size 3145728
[    3.413271] [drm] fb depth is 24
[    3.414564] [drm]    pitch is 4096
[    3.415907] radeon 0000:02:00.0: fb1: radeondrmfb frame buffer device
[    3.417226] [drm] Initialized radeon 2.30.0 20080528 for 0000:02:00.0 on minor 1
[    3.444787] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.545212] EXT4-fs (sda1): barriers disabled
[    3.546586] EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: data=writeback,barrier=0,errors=remount-ro
[    3.604967] systemd-journald[70]: Received SIGTERM
[    3.997952] type=1404 audit(1367421658.889:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[    4.082141] SELinux: 2048 avtab hash slots, 96403 rules.
[    4.093994] SELinux: 2048 avtab hash slots, 96403 rules.
[    4.231619] SELinux:  9 users, 15 roles, 4389 types, 246 bools, 1 sens, 1024 cats
[    4.231623] SELinux:  83 classes, 96403 rules
[    4.235090] SELinux:  Permission attach_queue in class tun_socket not defined in policy.
[    4.235093] SELinux: the above unknown classes and permissions will be allowed
[    4.235100] SELinux:  Completing initialization.
[    4.235101] SELinux:  Setting up existing superblocks.
[    4.235108] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    4.235112] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[    4.235121] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[    4.235125] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[    4.235131] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    4.235177] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[    4.235784] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[    4.235799] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[    4.236598] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[    4.236602] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[    4.236605] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[    4.236616] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[    4.236621] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[    4.236625] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[    4.236636] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    4.236972] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[    4.236974] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    4.236979] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    4.237045] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    4.237069] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    4.237072] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
[    4.237074] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    4.237079] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    4.237095] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    4.237102] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    4.237106] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    4.237109] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    4.237112] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    4.237119] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    4.237127] SELinux: initialized (dev sda1, type ext4), uses xattr
[    4.253601] type=1403 audit(1367421659.145:3): policy loaded auid=4294967295 ses=4294967295
[    4.257370] systemd[1]: Successfully loaded SELinux policy in 281.994ms.
[    4.339728] systemd[1]: RTC configured in localtime, applying delta of -300 minutes to system time.
[    4.371033] systemd[1]: Relabelled /dev and /run in 27.106ms.
[    5.206011] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[    5.298909] systemd-readahead[261]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[    5.555544] systemd-udevd[269]: starting version 201
[    5.724129] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    5.812564] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[    5.938105] EXT4-fs (sda1): re-mounted. Opts: data=writeback,barrier=0,errors=remount-ro
[    6.188274] microcode: CPU0: patch_level=0x01000086
[    6.200056] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
[    6.310766] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    6.310988] r8169 0000:03:00.0: irq 45 for MSI/MSI-X
[    6.311130] r8169 0000:03:00.0 eth0: RTL8168c/8111c at 0xffffc90000c7c000, 00:22:19:28:86:61, XID 1c4000c0 IRQ 45
[    6.311132] r8169 0000:03:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[    6.311154] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    6.311198] r8169 0000:04:09.0 (unregistered net_device): not PCI Express
[    6.311406] r8169 0000:04:09.0 eth1: RTL8169sb/8110sb at 0xffffc90000c7ec00, 48:02:2a:07:90:45, XID 10000000 IRQ 20
[    6.311408] r8169 0000:04:09.0 eth1: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[    6.361864] kvm: disabled by bios
[    6.365680] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[    6.378369] systemd-udevd[319]: renamed network interface eth0 to p10p1
[    6.421541] microcode: CPU0: new patch_level=0x010000db
[    6.421560] microcode: CPU1: patch_level=0x01000086
[    6.421570] microcode: CPU1: new patch_level=0x010000db
[    6.421583] microcode: CPU2: patch_level=0x01000086
[    6.421592] microcode: CPU2: new patch_level=0x010000db
[    6.421597] microcode: CPU3: patch_level=0x01000086
[    6.421603] microcode: CPU3: new patch_level=0x010000db
[    6.421726] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    6.422292] kvm: disabled by bios
[    6.427619] kvm: disabled by bios
[    6.427792] acpi-cpufreq: overriding BIOS provided _PSD data
[    6.447774] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[    6.468389] systemd-udevd[311]: renamed network interface eth1 to p8p1
[    6.481054] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    6.486190] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    6.491296] MCE: In-kernel MCE decoding enabled.
[    6.493031] EDAC MC: Ver: 3.0.0
[    6.494098] AMD64 EDAC driver v3.4.0
[    6.494209] EDAC amd64: DRAM ECC disabled.
[    6.494230] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
[    6.556954] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20130117/utaddress-251)
[    6.556973] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.570747] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    6.570883] sp5100_tco: PCI Revision ID: 0x3a
[    6.570908] sp5100_tco: failed to find MMIO address, giving up.
[    6.655203] Adding 2008060k swap on /dev/sda2.  Priority:-1 extents:1 across:2008060k 
[    7.769558] EXT4-fs (sda4): mounting ext3 file system using the ext4 subsystem
[    7.988142] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    7.988163] SELinux: initialized (dev sda4, type ext3), uses xattr
[    8.590198] EXT4-fs (sda3): barriers disabled
[    8.599088] EXT4-fs (sda3): mounted filesystem with writeback data mode. Opts: data=writeback,barrier=0,errors=remount-ro
[    8.599115] SELinux: initialized (dev sda3, type ext4), uses xattr
[    9.006168] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   11.292963] r8169 0000:03:00.0 p10p1: link down
[   11.292972] r8169 0000:03:00.0 p10p1: link down
[   11.293021] IPv6: ADDRCONF(NETDEV_UP): p10p1: link is not ready
[   11.301107] r8169 0000:04:09.0 p8p1: link down
[   11.301126] r8169 0000:04:09.0 p8p1: link down
[   11.301157] IPv6: ADDRCONF(NETDEV_UP): p8p1: link is not ready
[   12.334436] Bluetooth: Core ver 2.16
[   12.334519] NET: Registered protocol family 31
[   12.334520] Bluetooth: HCI device and connection manager initialized
[   12.334529] Bluetooth: HCI socket layer initialized
[   12.334532] Bluetooth: L2CAP socket layer initialized
[   12.334536] Bluetooth: SCO socket layer initialized
[   12.460073] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   12.460083] Bluetooth: BNEP filters: protocol multicast
[   12.460102] Bluetooth: BNEP socket layer initialized
[   13.618238] r8169 0000:04:09.0 p8p1: link up
[   13.618260] IPv6: ADDRCONF(NETDEV_CHANGE): p8p1: link becomes ready
[   13.693990] r8169 0000:03:00.0 p10p1: link up
[   13.694011] IPv6: ADDRCONF(NETDEV_CHANGE): p10p1: link becomes ready
[   15.007800] IN=p8p1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:22:19:28:86:61:08:00 SRC=0.0.0.0 DST=255.255.255.255 LEN=328 TOS=0x10 PREC=0x00 TTL=128 ID=0 PROTO=UDP SPT=68 DPT=67 LEN=308 
[   15.177538] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
[   15.177543] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   17.891752] IN=p8p1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:22:19:28:86:61:08:00 SRC=0.0.0.0 DST=255.255.255.255 LEN=328 TOS=0x10 PREC=0x00 TTL=128 ID=0 PROTO=UDP SPT=68 DPT=67 LEN=308 
[   28.421540] fuse init (API version 7.21)
[   28.425708] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[   62.569443] r8169 0000:04:09.0 p8p1: link down
[   62.592949] r8169 0000:03:00.0 p10p1: link down
[   64.908617] r8169 0000:04:09.0 p8p1: link up
[   64.957276] r8169 0000:03:00.0 p10p1: link up
[   74.605912] ata3: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x7
[   74.605918] ata3: SError: { HostInt }
[   74.605923] ata3: hard resetting link
[   75.064802] ata3: softreset failed (device not ready)
[   75.064815] ata3: applying PMP SRST workaround and retrying
[   75.219614] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   75.220677] ata3.00: configured for UDMA/133
[   75.231610] ata3: EH complete
[  271.440427] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=184.30.14.216 DST=192.168.1.69 LEN=89 TOS=0x00 PREC=0x00 TTL=50 ID=63778 DF PROTO=TCP SPT=443 DPT=48529 WINDOW=8893 RES=0x00 ACK PSH URGP=0 
[  271.440688] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=184.30.14.216 DST=192.168.1.69 LEN=52 TOS=0x00 PREC=0x00 TTL=50 ID=63779 DF PROTO=TCP SPT=443 DPT=48529 WINDOW=8893 RES=0x00 ACK FIN URGP=0 
[  273.208535] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=184.30.14.216 DST=192.168.1.69 LEN=89 TOS=0x00 PREC=0x00 TTL=50 ID=63780 DF PROTO=TCP SPT=443 DPT=48529 WINDOW=8893 RES=0x00 ACK PSH URGP=0 
[  276.740987] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=184.30.14.216 DST=192.168.1.69 LEN=89 TOS=0x00 PREC=0x00 TTL=50 ID=63781 DF PROTO=TCP SPT=443 DPT=48529 WINDOW=8893 RES=0x00 ACK PSH URGP=0 
[  283.815012] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=184.30.14.216 DST=192.168.1.69 LEN=89 TOS=0x00 PREC=0x00 TTL=50 ID=63782 DF PROTO=TCP SPT=443 DPT=48529 WINDOW=8893 RES=0x00 ACK PSH URGP=0 
[  297.947651] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=184.30.14.216 DST=192.168.1.69 LEN=89 TOS=0x00 PREC=0x00 TTL=50 ID=63783 DF PROTO=TCP SPT=443 DPT=48529 WINDOW=8893 RES=0x00 ACK PSH URGP=0 
[  326.178696] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=184.30.14.216 DST=192.168.1.69 LEN=89 TOS=0x00 PREC=0x00 TTL=50 ID=63784 DF PROTO=TCP SPT=443 DPT=48529 WINDOW=8893 RES=0x00 ACK PSH URGP=0 
[  431.835094] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.139.188 DST=192.168.1.69 LEN=226 TOS=0x00 PREC=0x00 TTL=44 ID=50085 PROTO=TCP SPT=5228 DPT=42847 WINDOW=1002 RES=0x00 ACK PSH URGP=0 
[  432.177632] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.139.188 DST=192.168.1.69 LEN=226 TOS=0x00 PREC=0x00 TTL=44 ID=50086 PROTO=TCP SPT=5228 DPT=42847 WINDOW=1002 RES=0x00 ACK PSH URGP=0 
[  433.109391] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.139.188 DST=192.168.1.69 LEN=226 TOS=0x00 PREC=0x00 TTL=44 ID=50087 PROTO=TCP SPT=5228 DPT=42847 WINDOW=1002 RES=0x00 ACK PSH URGP=0 
[  433.940937] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.139.188 DST=192.168.1.69 LEN=226 TOS=0x00 PREC=0x00 TTL=44 ID=50088 PROTO=TCP SPT=5228 DPT=42847 WINDOW=1002 RES=0x00 ACK PSH URGP=0 
[  436.068786] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.134.108 DST=192.168.1.69 LEN=40 TOS=0x00 PREC=0x00 TTL=44 ID=60851 PROTO=TCP SPT=587 DPT=47778 WINDOW=0 RES=0x00 RST URGP=0 
[  438.153011] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.139.188 DST=192.168.1.69 LEN=226 TOS=0x00 PREC=0x00 TTL=44 ID=50089 PROTO=TCP SPT=5228 DPT=42847 WINDOW=1002 RES=0x00 ACK PSH URGP=0 
[  446.577432] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.139.188 DST=192.168.1.69 LEN=226 TOS=0x00 PREC=0x00 TTL=44 ID=50090 PROTO=TCP SPT=5228 DPT=42847 WINDOW=1002 RES=0x00 ACK PSH URGP=0 
[  456.570175] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.139.188 DST=192.168.1.69 LEN=226 TOS=0x00 PREC=0x00 TTL=44 ID=50091 PROTO=TCP SPT=5228 DPT=42847 WINDOW=1002 RES=0x00 ACK PSH URGP=0 
[  461.920165] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.130.109 DST=192.168.1.69 LEN=40 TOS=0x00 PREC=0x00 TTL=44 ID=25136 PROTO=TCP SPT=993 DPT=40111 WINDOW=0 RES=0x00 RST URGP=0 
[  466.561423] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.139.188 DST=192.168.1.69 LEN=226 TOS=0x00 PREC=0x00 TTL=44 ID=50092 PROTO=TCP SPT=5228 DPT=42847 WINDOW=1002 RES=0x00 ACK PSH URGP=0 
[  476.552669] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.139.188 DST=192.168.1.69 LEN=226 TOS=0x00 PREC=0x00 TTL=44 ID=50093 PROTO=TCP SPT=5228 DPT=42847 WINDOW=1002 RES=0x00 ACK PSH URGP=0 
[  486.543904] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.139.188 DST=192.168.1.69 LEN=226 TOS=0x00 PREC=0x00 TTL=44 ID=50094 PROTO=TCP SPT=5228 DPT=42847 WINDOW=1002 RES=0x00 ACK PSH URGP=0 
[ 1241.858832] r8169 0000:04:09.0 p8p1: link down
[ 1241.884743] r8169 0000:03:00.0 p10p1: link down
[ 1244.238997] r8169 0000:04:09.0 p8p1: link up
[ 1244.316354] r8169 0000:03:00.0 p10p1: link up
[ 1301.871665] r8169 0000:03:00.0 p10p1: link down
[ 1304.273223] r8169 0000:03:00.0 p10p1: link up
[ 1321.884085] r8169 0000:04:09.0 p8p1: link down
[ 1324.239347] r8169 0000:04:09.0 p8p1: link up
[ 1897.596085] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.130.109 DST=192.168.1.69 LEN=40 TOS=0x00 PREC=0x00 TTL=44 ID=43581 PROTO=TCP SPT=993 DPT=40255 WINDOW=0 RES=0x00 RST URGP=0 
[ 3946.589003] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=8.254.64.126 DST=192.168.1.69 LEN=40 TOS=0x00 PREC=0x00 TTL=47 ID=0 DF PROTO=TCP SPT=80 DPT=52543 WINDOW=0 RES=0x00 RST URGP=0 
[ 4005.191275] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=216.239.127.78 DST=192.168.1.69 LEN=56 TOS=0x00 PREC=0xE0 TTL=237 ID=1521 PROTO=ICMP TYPE=11 CODE=0 [SRC=192.168.1.69 DST=216.239.127.70 LEN=70 TOS=0x00 PREC=0x00 TTL=1 ID=45112 PROTO=UDP SPT=26299 DPT=53 LEN=50 ] 
[ 4005.554571] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=216.239.127.78 DST=192.168.1.69 LEN=56 TOS=0x00 PREC=0xE0 TTL=237 ID=2713 PROTO=ICMP TYPE=11 CODE=0 [SRC=192.168.1.69 DST=216.239.127.70 LEN=70 TOS=0x00 PREC=0x00 TTL=1 ID=45113 PROTO=UDP SPT=10701 DPT=53 LEN=50 ] 
[ 4005.931689] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=216.239.127.78 DST=192.168.1.69 LEN=56 TOS=0x00 PREC=0xE0 TTL=237 ID=4087 PROTO=ICMP TYPE=11 CODE=0 [SRC=192.168.1.69 DST=216.239.127.70 LEN=70 TOS=0x00 PREC=0x00 TTL=1 ID=45114 PROTO=UDP SPT=24500 DPT=53 LEN=50 ] 
[ 4006.687494] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=216.239.127.78 DST=192.168.1.69 LEN=56 TOS=0x00 PREC=0xE0 TTL=237 ID=7519 PROTO=ICMP TYPE=11 CODE=0 [SRC=192.168.1.69 DST=216.239.127.70 LEN=70 TOS=0x00 PREC=0x00 TTL=1 ID=45115 PROTO=UDP SPT=62126 DPT=53 LEN=50 ] 
[ 4260.008837] r8169 0000:04:09.0 p8p1: link down
[ 4260.035742] r8169 0000:03:00.0 p10p1: link down
[ 4262.428926] r8169 0000:04:09.0 p8p1: link up
[ 4262.644022] r8169 0000:03:00.0 p10p1: link up
[ 4320.021974] r8169 0000:04:09.0 p8p1: link down
[ 4320.043588] r8169 0000:03:00.0 p10p1: link down
[ 4322.412767] r8169 0000:03:00.0 p10p1: link up
[ 4322.932128] r8169 0000:04:09.0 p8p1: link up
[ 4373.233380] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.137.120 DST=192.168.1.69 LEN=40 TOS=0x00 PREC=0x00 TTL=44 ID=1546 PROTO=TCP SPT=443 DPT=37531 WINDOW=0 RES=0x00 RST URGP=0 
[ 4567.577301] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.137.138 DST=192.168.1.69 LEN=40 TOS=0x00 PREC=0x00 TTL=44 ID=24087 PROTO=TCP SPT=443 DPT=42753 WINDOW=0 RES=0x00 RST URGP=0 
[ 4942.332456] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.137.102 DST=192.168.1.69 LEN=40 TOS=0x00 PREC=0x00 TTL=44 ID=33556 PROTO=TCP SPT=443 DPT=35094 WINDOW=0 RES=0x00 RST URGP=0 
[ 4942.333683] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.137.102 DST=192.168.1.69 LEN=40 TOS=0x00 PREC=0x00 TTL=44 ID=33557 PROTO=TCP SPT=443 DPT=35094 WINDOW=0 RES=0x00 RST URGP=0 
[ 4942.334921] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.137.102 DST=192.168.1.69 LEN=40 TOS=0x00 PREC=0x00 TTL=44 ID=33558 PROTO=TCP SPT=443 DPT=35094 WINDOW=0 RES=0x00 RST URGP=0 
[ 5153.954338] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.137.84 DST=192.168.1.69 LEN=40 TOS=0x00 PREC=0x00 TTL=44 ID=2462 PROTO=TCP SPT=443 DPT=56147 WINDOW=0 RES=0x00 RST URGP=0 
[ 5153.955146] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.137.84 DST=192.168.1.69 LEN=40 TOS=0x00 PREC=0x00 TTL=44 ID=2463 PROTO=TCP SPT=443 DPT=56147 WINDOW=0 RES=0x00 RST URGP=0 
[ 5153.955392] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.137.84 DST=192.168.1.69 LEN=40 TOS=0x00 PREC=0x00 TTL=44 ID=2464 PROTO=TCP SPT=443 DPT=56147 WINDOW=0 RES=0x00 RST URGP=0 
[ 9863.407437] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=66.155.171.116 DST=192.168.1.69 LEN=102 TOS=0x00 PREC=0x00 TTL=42 ID=42043 PROTO=ICMP TYPE=3 CODE=3 [SRC=192.168.1.69 DST=66.155.171.116 LEN=74 TOS=0x00 PREC=0x00 TTL=42 ID=48803 PROTO=UDP SPT=13974 DPT=53 LEN=54 ] 
[ 9863.565922] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=66.155.171.116 DST=192.168.1.69 LEN=106 TOS=0x00 PREC=0x00 TTL=42 ID=42044 PROTO=ICMP TYPE=3 CODE=3 [SRC=192.168.1.69 DST=66.155.171.116 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=48804 PROTO=UDP SPT=37457 DPT=53 LEN=58 ] 
[ 9863.782297] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=66.155.171.116 DST=192.168.1.69 LEN=102 TOS=0x00 PREC=0x00 TTL=42 ID=42045 PROTO=ICMP TYPE=3 CODE=3 [SRC=192.168.1.69 DST=66.155.171.116 LEN=74 TOS=0x00 PREC=0x00 TTL=42 ID=48805 PROTO=UDP SPT=35287 DPT=53 LEN=54 ] 
[ 9863.926547] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=66.155.171.116 DST=192.168.1.69 LEN=106 TOS=0x00 PREC=0x00 TTL=42 ID=42046 PROTO=ICMP TYPE=3 CODE=3 [SRC=192.168.1.69 DST=66.155.171.116 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=48806 PROTO=UDP SPT=62838 DPT=53 LEN=58 ] 
[14102.043231] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.137.18 DST=192.168.1.69 LEN=40 TOS=0x00 PREC=0x00 TTL=44 ID=29408 PROTO=TCP SPT=443 DPT=55851 WINDOW=0 RES=0x00 RST URGP=0 
[14671.599232] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.137.95 DST=192.168.1.69 LEN=40 TOS=0x00 PREC=0x00 TTL=44 ID=23847 PROTO=TCP SPT=443 DPT=49747 WINDOW=0 RES=0x00 RST URGP=0 
[14671.600378] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.137.95 DST=192.168.1.69 LEN=40 TOS=0x00 PREC=0x00 TTL=44 ID=23848 PROTO=TCP SPT=443 DPT=49747 WINDOW=0 RES=0x00 RST URGP=0 
[14671.601816] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.137.95 DST=192.168.1.69 LEN=40 TOS=0x00 PREC=0x00 TTL=44 ID=23849 PROTO=TCP SPT=443 DPT=49747 WINDOW=0 RES=0x00 RST URGP=0 
[15525.704148] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.137.104 DST=192.168.1.69 LEN=40 TOS=0x00 PREC=0x00 TTL=44 ID=30006 PROTO=TCP SPT=443 DPT=44342 WINDOW=0 RES=0x00 RST URGP=0 
[15525.705503] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.137.104 DST=192.168.1.69 LEN=40 TOS=0x00 PREC=0x00 TTL=44 ID=30007 PROTO=TCP SPT=443 DPT=44342 WINDOW=0 RES=0x00 RST URGP=0 
[15525.705627] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.137.104 DST=192.168.1.69 LEN=40 TOS=0x00 PREC=0x00 TTL=44 ID=30008 PROTO=TCP SPT=443 DPT=44342 WINDOW=0 RES=0x00 RST URGP=0 
[16245.016611] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.137.104 DST=192.168.1.69 LEN=40 TOS=0x00 PREC=0x00 TTL=44 ID=7766 PROTO=TCP SPT=443 DPT=44413 WINDOW=0 RES=0x00 RST URGP=0 
[16245.021750] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.137.104 DST=192.168.1.69 LEN=40 TOS=0x00 PREC=0x00 TTL=44 ID=7767 PROTO=TCP SPT=443 DPT=44413 WINDOW=0 RES=0x00 RST URGP=0 
[16245.021863] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.137.104 DST=192.168.1.69 LEN=40 TOS=0x00 PREC=0x00 TTL=44 ID=7768 PROTO=TCP SPT=443 DPT=44413 WINDOW=0 RES=0x00 RST URGP=0 
[16245.026949] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.137.138 DST=192.168.1.69 LEN=40 TOS=0x00 PREC=0x00 TTL=44 ID=49253 PROTO=TCP SPT=443 DPT=43325 WINDOW=0 RES=0x00 RST URGP=0 
[16245.028090] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.137.138 DST=192.168.1.69 LEN=40 TOS=0x00 PREC=0x00 TTL=44 ID=49254 PROTO=TCP SPT=443 DPT=43325 WINDOW=0 RES=0x00 RST URGP=0 
[16245.029295] IN=p10p1 OUT= MAC=00:22:19:28:86:61:14:5b:d1:dd:6e:50:08:00 SRC=74.125.137.138 DST=192.168.1.69 LEN=40 TOS=0x00 PREC=0x00 TTL=44 ID=49255 PROTO=TCP SPT=443 DPT=43325 WINDOW=0 RES=0x00 RST URGP=0 

[-- Attachment #3: interrupts.aout.txt --]
[-- Type: text/plain, Size: 2492 bytes --]

           CPU0       CPU1       CPU2       CPU3       
  0:        129          0          0          0   IO-APIC-edge      timer
  1:          0          0          2          0   IO-APIC-edge      i8042
  7:          1          0          0          0   IO-APIC-edge    
  8:          0          0          1          0   IO-APIC-edge      rtc0
  9:          0          0          0          0   IO-APIC-fasteoi   acpi
 12:          0          0          0          4   IO-APIC-edge      i8042
 14:          0          0          0          0   IO-APIC-edge      pata_atiixp
 15:          0          0          0          0   IO-APIC-edge      pata_atiixp
 16:          0          0         15         55   IO-APIC-fasteoi   ohci_hcd:usb3, ohci_hcd:usb4
 17:          0          0          0          3   IO-APIC-fasteoi   ehci_hcd:usb1
 18:          0          0          1         33   IO-APIC-fasteoi   ohci_hcd:usb5, ohci_hcd:usb6, ohci_hcd:usb7
 19:          0          0          0          2   IO-APIC-fasteoi   ehci_hcd:usb2
 20:     431440          0         11         23   IO-APIC-fasteoi   p8p1
 22:       8092      58688      47436      41380   IO-APIC-fasteoi   ahci
 23:          0          0          0          2   IO-APIC-fasteoi   firewire_ohci
 43:          1          2         11       5575   PCI-MSI-edge      radeon
 44:          0          0          0          2   PCI-MSI-edge      radeon
 45:          0          0          0     393095   PCI-MSI-edge      p10p1
NMI:          0          0          0          0   Non-maskable interrupts
LOC:    1417407    1538471    1400002    1485117   Local timer interrupts
SPU:          0          0          0          0   Spurious interrupts
PMI:          0          0          0          0   Performance monitoring interrupts
IWI:          1          1          1         37   IRQ work interrupts
RTR:          0          0          0          0   APIC ICR read retries
RES:     647089     437516     426581     401762   Rescheduling interrupts
CAL:        359        390        433        224   Function call interrupts
TLB:      14815      15475      15245      15919   TLB shootdowns
TRM:          0          0          0          0   Thermal event interrupts
THR:          0          0          0          0   Threshold APIC interrupts
MCE:          0          0          0          0   Machine check exceptions
MCP:         59         59         59         59   Machine check polls
ERR:          1
MIS:          0

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: r8169 with 3.9.0-rc9
  2013-05-02  2:18               ` Lance Lassetter
@ 2013-05-02 22:18                 ` Francois Romieu
  2013-05-03  4:24                   ` Lance Lassetter
  2013-05-05 15:17                   ` Lance Lassetter
  0 siblings, 2 replies; 22+ messages in thread
From: Francois Romieu @ 2013-05-02 22:18 UTC (permalink / raw)
  To: Lance Lassetter; +Cc: netdev

Lance Lassetter <lancelassetter@gmail.com> :
[...]
> afaik, I think my last FC17 kernel was 3.8.8-100 and the Fedora 18 install date
> was the week of the Fedora 18 alpha release, afaik September of 2012.

O_o

Did you try Fedora 17 kernels on your Fedora 18 ?

It does not look like a proper r8169 driver problem: almost (...) the same kernel,
different compiler and different userspace.

-- 
Ueimor

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: r8169 with 3.9.0-rc9
  2013-05-02 22:18                 ` Francois Romieu
@ 2013-05-03  4:24                   ` Lance Lassetter
  2013-05-05 15:17                   ` Lance Lassetter
  1 sibling, 0 replies; 22+ messages in thread
From: Lance Lassetter @ 2013-05-03  4:24 UTC (permalink / raw)
  To: Francois Romieu; +Cc: netdev

On Fri, May 03, 2013 at 12:18:37AM +0200, Francois Romieu wrote:
> Lance Lassetter <lancelassetter@gmail.com> :
> [...]
> > afaik, I think my last FC17 kernel was 3.8.8-100 and the Fedora 18 install date
> > was the week of the Fedora 18 alpha release, afaik September of 2012.
> 
> O_o
> 
> Did you try Fedora 17 kernels on your Fedora 18 ?
> 
> It does not look like a proper r8169 driver problem: almost (...) the same kernel,
> different compiler and different userspace.
> 
> -- 
> Ueimor


Ueimor,

Sure will try!

Thanks,

Lance

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: r8169 with 3.9.0-rc9
  2013-05-02 22:18                 ` Francois Romieu
  2013-05-03  4:24                   ` Lance Lassetter
@ 2013-05-05 15:17                   ` Lance Lassetter
  2013-05-05 16:02                     ` Lance Lassetter
  2013-05-05 19:33                     ` Francois Romieu
  1 sibling, 2 replies; 22+ messages in thread
From: Lance Lassetter @ 2013-05-05 15:17 UTC (permalink / raw)
  To: Francois Romieu; +Cc: netdev

On Fri, May 03, 2013 at 12:18:37AM +0200, Francois Romieu wrote:
> Lance Lassetter <lancelassetter@gmail.com> :
> [...]
> > afaik, I think my last FC17 kernel was 3.8.8-100 and the Fedora 18 install date
> > was the week of the Fedora 18 alpha release, afaik September of 2012.
> 
> O_o
> 
> Did you try Fedora 17 kernels on your Fedora 18 ?
> 
> It does not look like a proper r8169 driver problem: almost (...) the same kernel,
> different compiler and different userspace.
> 
> -- 
> Ueimor

Ueimor:

Hi!  I'm exhausted with this....

Tried Fedora 17 kernels (both Vanilla and stock) on Fedora 18 still same effect.  My BIOS is one version behind the latest version, could that be a problem?

What do you think, Ueimor? Maybe faulty motherboard?

Lance

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: r8169 with 3.9.0-rc9
  2013-05-05 15:17                   ` Lance Lassetter
@ 2013-05-05 16:02                     ` Lance Lassetter
  2013-05-05 19:33                     ` Francois Romieu
  1 sibling, 0 replies; 22+ messages in thread
From: Lance Lassetter @ 2013-05-05 16:02 UTC (permalink / raw)
  To: Francois Romieu; +Cc: netdev

On Sun, May 05, 2013 at 10:17:34AM -0500, Lance Lassetter wrote:
> On Fri, May 03, 2013 at 12:18:37AM +0200, Francois Romieu wrote:
> > Lance Lassetter <lancelassetter@gmail.com> :
> > [...]
> > > afaik, I think my last FC17 kernel was 3.8.8-100 and the Fedora 18 install date
> > > was the week of the Fedora 18 alpha release, afaik September of 2012.
> > 
> > O_o
> > 
> > Did you try Fedora 17 kernels on your Fedora 18 ?
> > 
> > It does not look like a proper r8169 driver problem: almost (...) the same kernel,
> > different compiler and different userspace.
> > 
> > -- 
> > Ueimor
> 
> Ueimor:
> 
> Hi!  I'm exhausted with this....
> 
> Tried Fedora 17 kernels (both Vanilla and stock) on Fedora 18 still same effect.  My BIOS is one version behind the latest version, could that be a problem?
> 
> What do you think, Ueimor? Maybe faulty motherboard?
> 
> Lance

Ugh.  I'm thinking of just upgrading to an IBM server.

Lance

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: r8169 with 3.9.0-rc9
  2013-05-05 15:17                   ` Lance Lassetter
  2013-05-05 16:02                     ` Lance Lassetter
@ 2013-05-05 19:33                     ` Francois Romieu
  2013-05-09 17:14                       ` Lance Lassetter
                                         ` (5 more replies)
  1 sibling, 6 replies; 22+ messages in thread
From: Francois Romieu @ 2013-05-05 19:33 UTC (permalink / raw)
  To: Lance Lassetter; +Cc: netdev

Lance Lassetter <lancelassetter@gmail.com> :
[...]
> What do you think, Ueimor ?

I think you should try a post 3.9 kernel including commit
4ada8db38a44654446fe35ceb20a1972220e0f69 ("net: Restore NETIF_F_* bit
ordering.").

-- 
Ueimor

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: r8169 with 3.9.0-rc9
  2013-05-05 19:33                     ` Francois Romieu
@ 2013-05-09 17:14                       ` Lance Lassetter
  2013-05-09 17:50                       ` Lance Lassetter
                                         ` (4 subsequent siblings)
  5 siblings, 0 replies; 22+ messages in thread
From: Lance Lassetter @ 2013-05-09 17:14 UTC (permalink / raw)
  To: Francois Romieu; +Cc: netdev

On Sun, May 05, 2013 at 09:33:23PM +0200, Francois Romieu wrote:
> Lance Lassetter <lancelassetter@gmail.com> :
> [...]
> > What do you think, Ueimor ?
> 
> I think you should try a post 3.9 kernel including commit
> 4ada8db38a44654446fe35ceb20a1972220e0f69 ("net: Restore NETIF_F_* bit
> ordering.").
> 
> -- 
> Ueimor

Ueimor,

Thanks!  Does 3.9.1 have this commit?  I searched throught the changelog and didn't see it.

Regards,

Lance

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: r8169 with 3.9.0-rc9
  2013-05-05 19:33                     ` Francois Romieu
  2013-05-09 17:14                       ` Lance Lassetter
@ 2013-05-09 17:50                       ` Lance Lassetter
  2013-05-10 19:02                       ` Lance Lassetter
                                         ` (3 subsequent siblings)
  5 siblings, 0 replies; 22+ messages in thread
From: Lance Lassetter @ 2013-05-09 17:50 UTC (permalink / raw)
  To: Francois Romieu; +Cc: netdev

On Sun, May 05, 2013 at 09:33:23PM +0200, Francois Romieu wrote:
> Lance Lassetter <lancelassetter@gmail.com> :
> [...]
> > What do you think, Ueimor ?
> 
> I think you should try a post 3.9 kernel including commit
> 4ada8db38a44654446fe35ceb20a1972220e0f69 ("net: Restore NETIF_F_* bit
> ordering.").
> 
> -- 
> Ueimor

Nevermind I found it.  Compiling 3.9.1 now.

Regards,

Lance

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: r8169 with 3.9.0-rc9
  2013-05-05 19:33                     ` Francois Romieu
  2013-05-09 17:14                       ` Lance Lassetter
  2013-05-09 17:50                       ` Lance Lassetter
@ 2013-05-10 19:02                       ` Lance Lassetter
  2013-05-14  3:04                       ` Lance Lassetter
                                         ` (2 subsequent siblings)
  5 siblings, 0 replies; 22+ messages in thread
From: Lance Lassetter @ 2013-05-10 19:02 UTC (permalink / raw)
  To: Francois Romieu; +Cc: netdev

On Sun, May 05, 2013 at 09:33:23PM +0200, Francois Romieu wrote:
> Lance Lassetter <lancelassetter@gmail.com> :
> [...]
> > What do you think, Ueimor ?
> 
> I think you should try a post 3.9 kernel including commit
> 4ada8db38a44654446fe35ceb20a1972220e0f69 ("net: Restore NETIF_F_* bit
> ordering.").
> 
> -- 
> Ueimor

ugh.  I'll wait for the commit.

:-D

Thanks Ueimor!!!

Lance

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: r8169 with 3.9.0-rc9
  2013-05-05 19:33                     ` Francois Romieu
                                         ` (2 preceding siblings ...)
  2013-05-10 19:02                       ` Lance Lassetter
@ 2013-05-14  3:04                       ` Lance Lassetter
  2013-05-17 14:35                         ` Lance Lassetter
  2013-05-24  4:45                       ` Lance Lassetter
  2013-06-04  2:16                       ` Lance Lassetter
  5 siblings, 1 reply; 22+ messages in thread
From: Lance Lassetter @ 2013-05-14  3:04 UTC (permalink / raw)
  To: Francois Romieu; +Cc: netdev

On Sun, May 05, 2013 at 09:33:23PM +0200, Francois Romieu wrote:
> Lance Lassetter <lancelassetter@gmail.com> :
> [...]
> > What do you think, Ueimor ?
> 
> I think you should try a post 3.9 kernel including commit
> 4ada8db38a44654446fe35ceb20a1972220e0f69 ("net: Restore NETIF_F_* bit
> ordering.").
> 
> -- 
> Ueimor

Ueimor,

Tried stock 3.10-rc1.  Still same problem with alias r8169 alias p10p1 and p8p1 "up down, up down".

Does this kernel inclde your patch?  I think it does....

Please reply with suggestions.

Regards,

Lance Lassetter

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: r8169 with 3.9.0-rc9
  2013-05-14  3:04                       ` Lance Lassetter
@ 2013-05-17 14:35                         ` Lance Lassetter
  0 siblings, 0 replies; 22+ messages in thread
From: Lance Lassetter @ 2013-05-17 14:35 UTC (permalink / raw)
  To: Francois Romieu; +Cc: netdev

On Mon, May 13, 2013 at 10:04:34PM -0500, Lance Lassetter wrote:
> On Sun, May 05, 2013 at 09:33:23PM +0200, Francois Romieu wrote:
> > Lance Lassetter <lancelassetter@gmail.com> :
> > [...]
> > > What do you think, Ueimor ?
> > 
> > I think you should try a post 3.9 kernel including commit
> > 4ada8db38a44654446fe35ceb20a1972220e0f69 ("net: Restore NETIF_F_* bit
> > ordering.").
> > 
> > -- 
> > Ueimor
> 
> Ueimor,
> 
> Tried stock 3.10-rc1.  Still same problem with alias r8169 alias p10p1 and p8p1 "up down, up down".
> 
> Does this kernel inclde your patch?  I think it does....
> 
> Please reply with suggestions.
> 
> Regards,
> 
> Lance Lassetter

Ueimor,

I don't think it's a driver problem as I've tried three separate drivers all to the same effect:  link up/link down.

I think it might be Fedora faulty power management orba udev problem.  I've modified /etc/udev/70-persisetent-net.rules, let's see what happens.

Thanks,

Lance

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: r8169 with 3.9.0-rc9
  2013-05-05 19:33                     ` Francois Romieu
                                         ` (3 preceding siblings ...)
  2013-05-14  3:04                       ` Lance Lassetter
@ 2013-05-24  4:45                       ` Lance Lassetter
  2013-06-04  2:16                       ` Lance Lassetter
  5 siblings, 0 replies; 22+ messages in thread
From: Lance Lassetter @ 2013-05-24  4:45 UTC (permalink / raw)
  To: Francois Romieu; +Cc: netdev

On Sun, May 05, 2013 at 09:33:23PM +0200, Francois Romieu wrote:
> Lance Lassetter <lancelassetter@gmail.com> :
> [...]
> > What do you think, Ueimor ?
> 
> I think you should try a post 3.9 kernel including commit
> 4ada8db38a44654446fe35ceb20a1972220e0f69 ("net: Restore NETIF_F_* bit
> ordering.").
> 
> -- 
> Ueimor

Ueimor,

I fixed the problem with grub2 bootloader kenel parameter: clocksource=acpi_pm  Evidently it was an AMD PowerNow bug with linux.  Fixing the timer resolved the constant loss of ether link.

Appreciate your time and support.

Lance Lassetter

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: r8169 with 3.9.0-rc9
  2013-05-05 19:33                     ` Francois Romieu
                                         ` (4 preceding siblings ...)
  2013-05-24  4:45                       ` Lance Lassetter
@ 2013-06-04  2:16                       ` Lance Lassetter
  5 siblings, 0 replies; 22+ messages in thread
From: Lance Lassetter @ 2013-06-04  2:16 UTC (permalink / raw)
  To: Francois Romieu; +Cc: netdev

On Sun, May 05, 2013 at 09:33:23PM +0200, Francois Romieu wrote:
> Lance Lassetter <lancelassetter@gmail.com> :
> [...]
> > What do you think, Ueimor ?
> 
> I think you should try a post 3.9 kernel including commit
> 4ada8db38a44654446fe35ceb20a1972220e0f69 ("net: Restore NETIF_F_* bit
> ordering.").
> 
> -- 
> Ueimor

So if it's a power management issue and buggy hardware it is something that should be fixed on my end?  Did any of the information I provided to be useful?

Lance

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: r8169 with 3.9.0-rc9
  2013-05-01 22:31             ` Francois Romieu
  2013-05-02  2:18               ` Lance Lassetter
@ 2013-05-02  2:23               ` Lance Lassetter
  1 sibling, 0 replies; 22+ messages in thread
From: Lance Lassetter @ 2013-05-02  2:23 UTC (permalink / raw)
  To: Francois Romieu; +Cc: netdev

On Thu, May 02, 2013 at 12:31:55AM +0200, Francois Romieu wrote:
> Lance Lassetter <lancelassetter@gmail.com> :
> [...]
> > Yes, it was an up to date Fedora 17.  I know this is probably redundant but
> > I also tried Realtek firmware from a Debian Sid box onto the Fedora 18
> > using testing repos with vanilla stable kernel to the same result.
> > 
> > Should I file a Red Hat bug ?
> 
> Not yet.
> 
> > Manually change IRQs, what do you think?
> 
> I need the version of the last known working Fedora 17 kernel or
> your Fedora 18 install date if you can't retrieve it.
> 
> A complete dmesg and the content of /proc/interrupts will be welcome.
> 
> Thanks.
> 
> -- 
> Ueimor

The initial FC18 Alpha kernel was 3.6 RC2 Fedora Core kernel.

I've just started using Fedora vanilla repos for kernel just recently; although they are not pure vanilla and do contain a minimal patchset from Fedora.

I've never compiled my own kernel on the machine with the r8169 issue.

Thanks,

Lance

^ permalink raw reply	[flat|nested] 22+ messages in thread

end of thread, other threads:[~2013-06-04  2:16 UTC | newest]

Thread overview: 22+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-04-26 13:23 r8169 with 3.9.0-rc9 Lance Lassetter
2013-04-26 20:50 ` Francois Romieu
2013-04-27  4:12   ` Lance Lassetter
2013-04-28  1:12     ` Lance Lassetter
2013-05-01 10:07       ` Lance Lassetter
2013-05-01 12:15         ` Francois Romieu
2013-05-01 21:28           ` Lance Lassetter
2013-05-01 22:31             ` Francois Romieu
2013-05-02  2:18               ` Lance Lassetter
2013-05-02 22:18                 ` Francois Romieu
2013-05-03  4:24                   ` Lance Lassetter
2013-05-05 15:17                   ` Lance Lassetter
2013-05-05 16:02                     ` Lance Lassetter
2013-05-05 19:33                     ` Francois Romieu
2013-05-09 17:14                       ` Lance Lassetter
2013-05-09 17:50                       ` Lance Lassetter
2013-05-10 19:02                       ` Lance Lassetter
2013-05-14  3:04                       ` Lance Lassetter
2013-05-17 14:35                         ` Lance Lassetter
2013-05-24  4:45                       ` Lance Lassetter
2013-06-04  2:16                       ` Lance Lassetter
2013-05-02  2:23               ` Lance Lassetter

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).