Re: Single socket with TX_RING and RX_RING

[Phil Sutter <phil@nwl.cc>]

On Thu, May 16, 2013 at 09:18:03AM +0000, Ricardo Tubío wrote:
> Phil Sutter <phil <at> nwl.cc> writes:
> 
> > 
> > On Wed, May 15, 2013 at 12:53:55PM +0000, Ricardo Tubío wrote:
> > > Once I tell kernel to export the TX_RING through setsockopt() (see code
> > > below) I always get an error (EBUSY) if i try to tell kernel to export the
> > > RX_RING with the same socket descriptor. Therefore, I have to open an
> > > additional socket for the RX_RING and I require of two sockets when I though
> > > that I would only require of one socket for both TX and RX using mmap()ed
> > > memory.
> > > 
> > > Do I need both sockets or am I doing something wrong?
> > 
> > After requesting the rings, a single mmap() call suffices for both. So
> > pseudo-code basically looks like this:
> > 
> > | setsockopt(fd, SOL_PACKET, PACKET_RX_RING, p, sizeof(p));
> > | setsockopt(fd, SOL_PACKET, PACKET_TX_RING, p, sizeof(p));
> > | rx_ring = mmap(NULL, ring_len * 2, PROT_READ | PROT_WRITE, MAP_SHARED,
> fd, 0);
> > | tx_ring = rx_ring + ring_len;
> > 
> > Note that packet_mmap() in net/packet/af_packet.c always maps the TX
> > ring memory right after the RX one.
> > 
> > HTH, Phil
> > 
> 
> Phil, the issue comes precisely when I try to do that: the second call to
> setsockopt() returns an "EBUSY" error message from the kernel. It seems that
> if you have initialized one socket for beeing either TX_RING or RX_RING, you
> cannot initialize the same socket again for the other option (RX_RING or
> TX_RING).

So you do not call init_ring() twice as one may imply when reading your
first mail? Please provide a complete code sample.