netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Eliezer Tamir <eliezer.tamir@linux.intel.com>
To: David Miller <davem@davemloft.net>
Cc: Willem de Bruijn <willemb@google.com>,
	Or Gerlitz <or.gerlitz@gmail.com>,
	e1000-devel@lists.sourceforge.net, netdev@vger.kernel.org,
	HPA <hpa@zytor.com>,
	linux-kernel@vger.kernel.org, Alex Rosenbaum <alexr@mellanox.com>,
	Jesse Brandeburg <jesse.brandeburg@intel.com>,
	Eliezer Tamir <eliezer@tamir.org.il>,
	Andi Kleen <andi@firstfloor.org>,
	Ben Hutchings <bhutchings@solarflare.com>,
	Eric Dumazet <erdnetdev@gmail.com>,
	Eilon Greenstien <eilong@broadcom.com>
Subject: [PATCH v7 net-next 4/5] ixgbe: Add support for ndo_ll_poll
Date: Thu, 30 May 2013 14:41:32 +0300	[thread overview]
Message-ID: <20130530114132.12653.19059.stgit@ladj378.jer.intel.com> (raw)
In-Reply-To: <20130530114045.12653.79183.stgit@ladj378.jer.intel.com>

Add the ixgbe driver code implementing ndo_ll_poll.
Adds ndo_ll_poll method and locking between it and the napi poll.
When receiving a packet we use skb_mark_ll to record the napi it came from.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
---

 drivers/net/ethernet/intel/ixgbe/ixgbe.h      |  120 +++++++++++++++++++++++++
 drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c  |    2 
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c |   63 +++++++++++--
 3 files changed, 177 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index ca93238..04fdbf6 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -52,6 +52,8 @@
 #include <linux/dca.h>
 #endif
 
+#include <net/ll_poll.h>
+
 /* common prefix used by pr_<> macros */
 #undef pr_fmt
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -356,9 +358,127 @@ struct ixgbe_q_vector {
 	struct rcu_head rcu;	/* to avoid race with update stats on free */
 	char name[IFNAMSIZ + 9];
 
+#ifdef CONFIG_NET_LL_RX_POLL
+	unsigned int state;
+#define IXGBE_QV_STATE_IDLE        0
+#define IXGBE_QV_STATE_NAPI	   1    /* NAPI owns this QV */
+#define IXGBE_QV_STATE_POLL	   2    /* poll owns this QV */
+#define IXGBE_QV_LOCKED (IXGBE_QV_STATE_NAPI | IXGBE_QV_STATE_POLL)
+#define IXGBE_QV_STATE_NAPI_YIELD  4    /* NAPI yielded this QV */
+#define IXGBE_QV_STATE_POLL_YIELD  8    /* poll yielded this QV */
+#define IXGBE_QV_YIELD (IXGBE_QV_STATE_NAPI_YIELD | IXGBE_QV_STATE_POLL_YIELD)
+#define IXGBE_QV_USER_PEND (IXGBE_QV_STATE_POLL | IXGBE_QV_STATE_POLL_YIELD)
+	spinlock_t lock;
+#endif  /* CONFIG_NET_LL_RX_POLL */
+
 	/* for dynamic allocation of rings associated with this q_vector */
 	struct ixgbe_ring ring[0] ____cacheline_internodealigned_in_smp;
 };
+#ifdef CONFIG_NET_LL_RX_POLL
+static inline void ixgbe_qv_init_lock(struct ixgbe_q_vector *q_vector)
+{
+
+	spin_lock_init(&q_vector->lock);
+	q_vector->state = IXGBE_QV_STATE_IDLE;
+}
+
+/* called from the device poll rutine to get ownership of a q_vector */
+static inline int ixgbe_qv_lock_napi(struct ixgbe_q_vector *q_vector)
+{
+	int rc = true;
+	spin_lock(&q_vector->lock);
+	if (q_vector->state & IXGBE_QV_LOCKED) {
+		WARN_ON(q_vector->state & IXGBE_QV_STATE_NAPI);
+		q_vector->state |= IXGBE_QV_STATE_NAPI_YIELD;
+		rc = false;
+	} else
+		/* we don't care if someone yielded */
+		q_vector->state = IXGBE_QV_STATE_NAPI;
+	spin_unlock(&q_vector->lock);
+	return rc;
+}
+
+/* returns true is someone tried to get the qv while napi had it */
+static inline int ixgbe_qv_unlock_napi(struct ixgbe_q_vector *q_vector)
+{
+	int rc = false;
+	spin_lock(&q_vector->lock);
+	WARN_ON(q_vector->state & (IXGBE_QV_STATE_POLL |
+			       IXGBE_QV_STATE_NAPI_YIELD));
+
+	if (q_vector->state & IXGBE_QV_STATE_POLL_YIELD)
+		rc = true;
+	q_vector->state = IXGBE_QV_STATE_IDLE;
+	spin_unlock(&q_vector->lock);
+	return rc;
+}
+
+/* called from ixgbe_low_latency_poll() */
+static inline int ixgbe_qv_lock_poll(struct ixgbe_q_vector *q_vector)
+{
+	int rc = true;
+	spin_lock_bh(&q_vector->lock);
+	if ((q_vector->state & IXGBE_QV_LOCKED)) {
+		q_vector->state |= IXGBE_QV_STATE_POLL_YIELD;
+		rc = false;
+	} else
+		/* preserve yield marks */
+		q_vector->state |= IXGBE_QV_STATE_POLL;
+	spin_unlock_bh(&q_vector->lock);
+	return rc;
+}
+
+/* returns true if someone tried to get the qv while it was locked */
+static inline int ixgbe_qv_unlock_poll(struct ixgbe_q_vector *q_vector)
+{
+	int rc = false;
+	spin_lock_bh(&q_vector->lock);
+	WARN_ON(q_vector->state & (IXGBE_QV_STATE_NAPI));
+
+	if (q_vector->state & IXGBE_QV_STATE_POLL_YIELD)
+		rc = true;
+	q_vector->state = IXGBE_QV_STATE_IDLE;
+	spin_unlock_bh(&q_vector->lock);
+	return rc;
+}
+
+/* true if a socket is polling, even if it did not get the lock */
+static inline int ixgbe_qv_ll_polling(struct ixgbe_q_vector *q_vector)
+{
+	WARN_ON(!(q_vector->state & IXGBE_QV_LOCKED));
+	return q_vector->state & IXGBE_QV_USER_PEND;
+}
+#else /* CONFIG_NET_LL_RX_POLL */
+static inline void ixgbe_qv_init_lock(struct ixgbe_q_vector *q_vector)
+{
+}
+
+static inline int ixgbe_qv_lock_napi(struct ixgbe_q_vector *q_vector)
+{
+	return true;
+}
+
+static inline int ixgbe_qv_unlock_napi(struct ixgbe_q_vector *q_vector)
+{
+	return false;
+}
+
+static inline int ixgbe_qv_lock_poll(struct ixgbe_q_vector *q_vector)
+{
+	return false;
+}
+
+static inline int ixgbe_qv_unlock_poll(struct ixgbe_q_vector *q_vector)
+{
+	return false;
+}
+
+static inline int ixgbe_qv_ll_polling(struct ixgbe_q_vector *q_vector)
+{
+	return false;
+}
+#endif /* CONFIG_NET_LL_RX_POLL */
+
 #ifdef CONFIG_IXGBE_HWMON
 
 #define IXGBE_HWMON_TYPE_LOC		0
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
index ef5f7a6..90b4e10 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
@@ -811,6 +811,7 @@ static int ixgbe_alloc_q_vector(struct ixgbe_adapter *adapter,
 	/* initialize NAPI */
 	netif_napi_add(adapter->netdev, &q_vector->napi,
 		       ixgbe_poll, 64);
+	napi_hash_add(&q_vector->napi);
 
 	/* tie q_vector and adapter together */
 	adapter->q_vector[v_idx] = q_vector;
@@ -931,6 +932,7 @@ static void ixgbe_free_q_vector(struct ixgbe_adapter *adapter, int v_idx)
 		adapter->rx_ring[ring->queue_index] = NULL;
 
 	adapter->q_vector[v_idx] = NULL;
+	napi_hash_del(&q_vector->napi);
 	netif_napi_del(&q_vector->napi);
 
 	/*
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index d30fbdd..9a7dc40 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -1504,7 +1504,9 @@ static void ixgbe_rx_skb(struct ixgbe_q_vector *q_vector,
 {
 	struct ixgbe_adapter *adapter = q_vector->adapter;
 
-	if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL))
+	if (ixgbe_qv_ll_polling(q_vector))
+		netif_receive_skb(skb);
+	else if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL))
 		napi_gro_receive(&q_vector->napi, skb);
 	else
 		netif_rx(skb);
@@ -1892,9 +1894,9 @@ dma_sync:
  * expensive overhead for IOMMU access this provides a means of avoiding
  * it by maintaining the mapping of the page to the syste.
  *
- * Returns true if all work is completed without reaching budget
+ * Returns amount of work completed
  **/
-static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
+static int ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 			       struct ixgbe_ring *rx_ring,
 			       const int budget)
 {
@@ -1976,6 +1978,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 		}
 
 #endif /* IXGBE_FCOE */
+		skb_mark_ll(skb, &q_vector->napi);
 		ixgbe_rx_skb(q_vector, skb);
 
 		/* update budget accounting */
@@ -1992,9 +1995,37 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 	if (cleaned_count)
 		ixgbe_alloc_rx_buffers(rx_ring, cleaned_count);
 
-	return (total_rx_packets < budget);
+	return total_rx_packets;
 }
 
+#ifdef CONFIG_NET_LL_RX_POLL
+/* must be called with local_bh_disable()d */
+static int ixgbe_low_latency_recv(struct napi_struct *napi)
+{
+	struct ixgbe_q_vector *q_vector =
+			container_of(napi, struct ixgbe_q_vector, napi);
+	struct ixgbe_adapter *adapter = q_vector->adapter;
+	struct ixgbe_ring  *ring;
+	int found = 0;
+
+	if (test_bit(__IXGBE_DOWN, &adapter->state))
+		return LL_FLUSH_FAILED;
+
+	if (!ixgbe_qv_lock_poll(q_vector))
+		return LL_FLUSH_BUSY;
+
+	ixgbe_for_each_ring(ring, q_vector->rx) {
+		found = ixgbe_clean_rx_irq(q_vector, ring, 4);
+		if (found)
+			break;
+	}
+
+	ixgbe_qv_unlock_poll(q_vector);
+
+	return found;
+}
+#endif	/* CONFIG_NET_LL_RX_POLL */
+
 /**
  * ixgbe_configure_msix - Configure MSI-X hardware
  * @adapter: board private structure
@@ -2550,6 +2581,9 @@ int ixgbe_poll(struct napi_struct *napi, int budget)
 	ixgbe_for_each_ring(ring, q_vector->tx)
 		clean_complete &= !!ixgbe_clean_tx_irq(q_vector, ring);
 
+	if (!ixgbe_qv_lock_napi(q_vector))
+		return budget;
+
 	/* attempt to distribute budget to each queue fairly, but don't allow
 	 * the budget to go below 1 because we'll exit polling */
 	if (q_vector->rx.count > 1)
@@ -2558,9 +2592,10 @@ int ixgbe_poll(struct napi_struct *napi, int budget)
 		per_ring_budget = budget;
 
 	ixgbe_for_each_ring(ring, q_vector->rx)
-		clean_complete &= ixgbe_clean_rx_irq(q_vector, ring,
-						     per_ring_budget);
+		clean_complete &= (ixgbe_clean_rx_irq(q_vector, ring,
+				   per_ring_budget) < per_ring_budget);
 
+	ixgbe_qv_unlock_napi(q_vector);
 	/* If all work not completed, return budget and keep polling */
 	if (!clean_complete)
 		return budget;
@@ -3747,16 +3782,25 @@ static void ixgbe_napi_enable_all(struct ixgbe_adapter *adapter)
 {
 	int q_idx;
 
-	for (q_idx = 0; q_idx < adapter->num_q_vectors; q_idx++)
+	for (q_idx = 0; q_idx < adapter->num_q_vectors; q_idx++) {
+		ixgbe_qv_init_lock(adapter->q_vector[q_idx]);
 		napi_enable(&adapter->q_vector[q_idx]->napi);
+	}
 }
 
 static void ixgbe_napi_disable_all(struct ixgbe_adapter *adapter)
 {
 	int q_idx;
 
-	for (q_idx = 0; q_idx < adapter->num_q_vectors; q_idx++)
+	local_bh_disable(); /* for ixgbe_qv_lock_napi() */
+	for (q_idx = 0; q_idx < adapter->num_q_vectors; q_idx++) {
 		napi_disable(&adapter->q_vector[q_idx]->napi);
+		while (!ixgbe_qv_lock_napi(adapter->q_vector[q_idx])) {
+			pr_info("QV %d locked\n", q_idx);
+			mdelay(1);
+		}
+	}
+	local_bh_enable();
 }
 
 #ifdef CONFIG_IXGBE_DCB
@@ -7177,6 +7221,9 @@ static const struct net_device_ops ixgbe_netdev_ops = {
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= ixgbe_netpoll,
 #endif
+#ifdef CONFIG_NET_LL_RX_POLL
+	.ndo_ll_poll		= ixgbe_low_latency_recv,
+#endif
 #ifdef IXGBE_FCOE
 	.ndo_fcoe_ddp_setup = ixgbe_fcoe_ddp_get,
 	.ndo_fcoe_ddp_target = ixgbe_fcoe_ddp_target,


------------------------------------------------------------------------------
Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET
Get 100% visibility into your production application - at no cost.
Code-level diagnostics for performance bottlenecks with <2% overhead
Download for free and get started troubleshooting in minutes.
http://p.sf.net/sfu/appdyn_d2d_ap1
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel&#174; Ethernet, visit http://communities.intel.com/community/wired

  parent reply	other threads:[~2013-05-30 11:41 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-30 11:40 [PATCH v7 net-next 0/5] net: low latency Ethernet device polling Eliezer Tamir
2013-05-30 11:40 ` [PATCH v7 net-next 1/5] net: add napi_id and hash Eliezer Tamir
2013-05-30 11:41 ` [PATCH v7 net-next 2/5] net: implement support for low latency socket polling Eliezer Tamir
2013-05-30 15:07   ` Amir Vadai
2013-05-30 20:01     ` Eliezer Tamir
2013-05-30 11:41 ` [PATCH v7 net-next 3/5] tcp: add TCP support for low latency receive poll Eliezer Tamir
2013-05-30 11:41 ` Eliezer Tamir [this message]
2013-05-31  3:32   ` [PATCH v7 net-next 4/5] ixgbe: Add support for ndo_ll_poll Cong Wang
2013-05-30 11:41 ` [PATCH v7 net-next 5/5] ixgbe: add extra stats " Eliezer Tamir
2013-06-02 14:02 ` [PATCH v7 net-next 0/5] net: low latency Ethernet device polling Eliezer Tamir
2013-06-02 20:11   ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130530114132.12653.19059.stgit@ladj378.jer.intel.com \
    --to=eliezer.tamir@linux.intel.com \
    --cc=alexr@mellanox.com \
    --cc=andi@firstfloor.org \
    --cc=bhutchings@solarflare.com \
    --cc=davem@davemloft.net \
    --cc=e1000-devel@lists.sourceforge.net \
    --cc=eilong@broadcom.com \
    --cc=eliezer@tamir.org.il \
    --cc=erdnetdev@gmail.com \
    --cc=hpa@zytor.com \
    --cc=jesse.brandeburg@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=or.gerlitz@gmail.com \
    --cc=willemb@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).