From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: Joe Perches <joe@perches.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>,
xen-devel@lists.xensource.com,
Ian Campbell <ian.campbell@citrix.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
"virtualization@lists.osdl.org"
<virtualization@lists.linux-foundation.org>
Subject: Re: [PATCH next] xen: Use more current logging styles
Date: Fri, 28 Jun 2013 09:11:42 -0400 [thread overview]
Message-ID: <20130628131142.GB3532@phenom.dumpdata.com> (raw)
In-Reply-To: <1372395469.2060.36.camel@joe-AO722>
On Thu, Jun 27, 2013 at 09:57:49PM -0700, Joe Perches wrote:
> Instead of mixing printk and pr_<level> forms,
> just use pr_<level>
>
> Miscellaneous changes around these conversions:
>
> Add a missing newline to avoid message interleaving,
> coalesce formats, reflow modified lines to 80 columns.
>
> Signed-off-by: Joe Perches <joe@perches.com>
> ---
> drivers/net/xen-netback/netback.c | 7 +++----
> drivers/net/xen-netfront.c | 28 +++++++++++++---------------
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> 2 files changed, 16 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
> index 130bcb2..64828de 100644
> --- a/drivers/net/xen-netback/netback.c
> +++ b/drivers/net/xen-netback/netback.c
> @@ -1890,9 +1890,8 @@ static int __init netback_init(void)
> return -ENODEV;
>
> if (fatal_skb_slots < XEN_NETBK_LEGACY_SLOTS_MAX) {
> - printk(KERN_INFO
> - "xen-netback: fatal_skb_slots too small (%d), bump it to XEN_NETBK_LEGACY_SLOTS_MAX (%d)\n",
> - fatal_skb_slots, XEN_NETBK_LEGACY_SLOTS_MAX);
> + pr_info("fatal_skb_slots too small (%d), bump it to XEN_NETBK_LEGACY_SLOTS_MAX (%d)\n",
> + fatal_skb_slots, XEN_NETBK_LEGACY_SLOTS_MAX);
> fatal_skb_slots = XEN_NETBK_LEGACY_SLOTS_MAX;
> }
>
> @@ -1921,7 +1920,7 @@ static int __init netback_init(void)
> "netback/%u", group);
>
> if (IS_ERR(netbk->task)) {
> - printk(KERN_ALERT "kthread_create() fails at netback\n");
> + pr_alert("kthread_create() fails at netback\n");
> del_timer(&netbk->net_timer);
> rc = PTR_ERR(netbk->task);
> goto failed_init;
> diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
> index 76a2236..ff7f111 100644
> --- a/drivers/net/xen-netfront.c
> +++ b/drivers/net/xen-netfront.c
> @@ -29,6 +29,8 @@
> * IN THE SOFTWARE.
> */
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include <linux/module.h>
> #include <linux/kernel.h>
> #include <linux/netdevice.h>
> @@ -385,9 +387,8 @@ static void xennet_tx_buf_gc(struct net_device *dev)
> skb = np->tx_skbs[id].skb;
> if (unlikely(gnttab_query_foreign_access(
> np->grant_tx_ref[id]) != 0)) {
> - printk(KERN_ALERT "xennet_tx_buf_gc: warning "
> - "-- grant still in use by backend "
> - "domain.\n");
> + pr_alert("%s: warning -- grant still in use by backend domain\n",
> + __func__);
> BUG();
> }
> gnttab_end_foreign_access_ref(
> @@ -804,14 +805,14 @@ static int xennet_set_skb_gso(struct sk_buff *skb,
> {
> if (!gso->u.gso.size) {
> if (net_ratelimit())
> - printk(KERN_WARNING "GSO size must not be zero.\n");
> + pr_warn("GSO size must not be zero\n");
> return -EINVAL;
> }
>
> /* Currently only TCPv4 S.O. is supported. */
> if (gso->u.gso.type != XEN_NETIF_GSO_TYPE_TCPV4) {
> if (net_ratelimit())
> - printk(KERN_WARNING "Bad GSO type %d.\n", gso->u.gso.type);
> + pr_warn("Bad GSO type %d\n", gso->u.gso.type);
> return -EINVAL;
> }
>
> @@ -910,9 +911,8 @@ static int checksum_setup(struct net_device *dev, struct sk_buff *skb)
> break;
> default:
> if (net_ratelimit())
> - printk(KERN_ERR "Attempting to checksum a non-"
> - "TCP/UDP packet, dropping a protocol"
> - " %d packet", iph->protocol);
> + pr_err("Attempting to checksum a non-TCP/UDP packet, dropping a protocol %d packet\n",
> + iph->protocol);
> goto out;
> }
>
> @@ -1359,14 +1359,14 @@ static struct net_device *xennet_create_dev(struct xenbus_device *dev)
> /* A grant for every tx ring slot */
> if (gnttab_alloc_grant_references(TX_MAX_TARGET,
> &np->gref_tx_head) < 0) {
> - printk(KERN_ALERT "#### netfront can't alloc tx grant refs\n");
> + pr_alert("can't alloc tx grant refs\n");
> err = -ENOMEM;
> goto exit_free_stats;
> }
> /* A grant for every rx ring slot */
> if (gnttab_alloc_grant_references(RX_MAX_TARGET,
> &np->gref_rx_head) < 0) {
> - printk(KERN_ALERT "#### netfront can't alloc rx grant refs\n");
> + pr_alert("can't alloc rx grant refs\n");
> err = -ENOMEM;
> goto exit_free_tx;
> }
> @@ -1430,16 +1430,14 @@ static int netfront_probe(struct xenbus_device *dev,
>
> err = register_netdev(info->netdev);
> if (err) {
> - printk(KERN_WARNING "%s: register_netdev err=%d\n",
> - __func__, err);
> + pr_warn("%s: register_netdev err=%d\n", __func__, err);
> goto fail;
> }
>
> err = xennet_sysfs_addif(info->netdev);
> if (err) {
> unregister_netdev(info->netdev);
> - printk(KERN_WARNING "%s: add sysfs failed err=%d\n",
> - __func__, err);
> + pr_warn("%s: add sysfs failed err=%d\n", __func__, err);
> goto fail;
> }
>
> @@ -2116,7 +2114,7 @@ static int __init netif_init(void)
> if (xen_hvm_domain() && !xen_platform_pci_unplug)
> return -ENODEV;
>
> - printk(KERN_INFO "Initialising Xen virtual ethernet driver.\n");
> + pr_info("Initialising Xen virtual ethernet driver\n");
>
> return xenbus_register_frontend(&netfront_driver);
> }
>
>
prev parent reply other threads:[~2013-06-28 13:11 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-28 4:57 [PATCH next] xen: Use more current logging styles Joe Perches
2013-06-28 7:59 ` Ian Campbell
2013-07-01 20:31 ` David Miller
2013-06-28 8:02 ` Wei Liu
2013-06-28 10:21 ` [PATCH next] xen: Convert printks to pr_<level> Joe Perches
2013-06-28 10:36 ` Wei Liu
2013-06-28 11:31 ` Joe Perches
2013-06-28 11:12 ` Ian Campbell
2013-06-28 13:11 ` Konrad Rzeszutek Wilk [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130628131142.GB3532@phenom.dumpdata.com \
--to=konrad.wilk@oracle.com \
--cc=ian.campbell@citrix.com \
--cc=jeremy@goop.org \
--cc=joe@perches.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=virtualization@lists.linux-foundation.org \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).