netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Tomanek <stefan.tomanek@wertarbyte.de>
To: netdev@vger.kernel.org
Subject: [PATCH iproute2 v2 2/2] ip rule: add route suppression options
Date: Sat, 3 Aug 2013 14:23:16 +0200	[thread overview]
Message-ID: <20130803122316.GN21970@zirkel.wertarbyte.de> (raw)

When configuring a system with multiple network uplinks and default routes, it
is often convenient to reference a routing table multiple times - but reject
its routing decision if certain constraints are not met by it.

Consider this setup:

$ ip route add table secuplink default via 10.42.23.1

$ ip rule add pref 100            table main suppress_prefixlength 0
$ ip rule add pref 150 fwmark 0xA table secuplink

With this setup, packets marked 0xA will be processed by the additional routing
table "secuplink", but only if no suitable route in the main routing table can
be found. By suppressing entries with a prefixlength of 0 (or less), the
default route (/0) of the table "main" is hidden to packets processed by rule
100; packets traveling to destinations via more specific routes are processed
as usual.

It is also possible to suppress a routing entry if a device belonging to
a specific interface group is to be used:

$ ip rule add pref 150 table main suppress_group 1

Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de>
---
 include/linux/fib_rules.h |    4 ++--
 ip/iprule.c               |   34 +++++++++++++++++++++++++++++++++-
 man/man8/ip-rule.8        |   17 +++++++++++++++++
 3 files changed, 52 insertions(+), 3 deletions(-)

diff --git a/include/linux/fib_rules.h b/include/linux/fib_rules.h
index 51da65b..2b82d7e 100644
--- a/include/linux/fib_rules.h
+++ b/include/linux/fib_rules.h
@@ -44,8 +44,8 @@ enum {
 	FRA_FWMARK,	/* mark */
 	FRA_FLOW,	/* flow/class id */
 	FRA_UNUSED6,
-	FRA_UNUSED7,
-	FRA_UNUSED8,
+	FRA_SUPPRESS_IFGROUP,
+	FRA_SUPPRESS_PREFIXLEN,
 	FRA_TABLE,	/* Extended table id */
 	FRA_FWMASK,	/* mask for netfilter mark */
 	FRA_OIFNAME,
diff --git a/ip/iprule.c b/ip/iprule.c
index a5fcd43..d934f67 100644
--- a/ip/iprule.c
+++ b/ip/iprule.c
@@ -39,6 +39,9 @@ static void usage(void)
 	fprintf(stderr, "          [ prohibit | reject | unreachable ]\n");
 	fprintf(stderr, "          [ realms [SRCREALM/]DSTREALM ]\n");
 	fprintf(stderr, "          [ goto NUMBER ]\n");
+	fprintf(stderr, "          SUPPRESSOR\n");
+	fprintf(stderr, "SUPPRESSOR := [ suppress_prefixlength NUMBER ]\n");
+	fprintf(stderr, "              [ suppress_ifgroup DEVGROUP ]\n");
 	fprintf(stderr, "TABLE_ID := [ local | main | default | NUMBER ]\n");
 	exit(-1);
 }
@@ -153,9 +156,24 @@ int print_rule(const struct sockaddr_nl *who, struct nlmsghdr *n, void *arg)
 	}
 
 	table = rtm_get_table(r, tb);
-	if (table)
+	if (table) {
 		fprintf(fp, "lookup %s ", rtnl_rttable_n2a(table, b1, sizeof(b1)));
 
+		if (tb[FRA_SUPPRESS_PREFIXLEN]) {
+			int pl = rta_getattr_u32(tb[FRA_SUPPRESS_PREFIXLEN]);
+			if (pl != -1) {
+				fprintf(fp, "suppress_prefixlength %d ", pl);
+			}
+		}
+		if (tb[FRA_SUPPRESS_IFGROUP]) {
+			int group = rta_getattr_u32(tb[FRA_SUPPRESS_IFGROUP]);
+			if (group != -1) {
+				SPRINT_BUF(b1);
+				fprintf(fp, "suppress_ifgroup %s ", rtnl_group_n2a(group, b1, sizeof(b1)));
+			}
+		}
+	}
+
 	if (tb[FRA_FLOW]) {
 		__u32 to = rta_getattr_u32(tb[FRA_FLOW]);
 		__u32 from = to>>16;
@@ -310,6 +328,20 @@ static int iprule_modify(int cmd, int argc, char **argv)
 				addattr32(&req.n, sizeof(req), FRA_TABLE, tid);
 			}
 			table_ok = 1;
+		} else if (matches(*argv, "suppress_prefixlength") == 0 ||
+			   strcmp(*argv, "sup_pl") == 0) {
+			int pl;
+			NEXT_ARG();
+			if (get_s32(&pl, *argv, 0) || pl < 0)
+				invarg("suppress_prefixlength value is invalid\n", *argv);
+			addattr32(&req.n, sizeof(req), FRA_SUPPRESS_PREFIXLEN, pl);
+		} else if (matches(*argv, "suppress_ifgroup") == 0 ||
+			   strcmp(*argv, "sup_group") == 0) {
+			NEXT_ARG();
+			int group;
+			if (rtnl_group_a2n(&group, *argv))
+				invarg("Invalid \"suppress_ifgroup\" value\n", *argv);
+			addattr32(&req.n, sizeof(req), FRA_SUPPRESS_IFGROUP, group);
 		} else if (strcmp(*argv, "dev") == 0 ||
 			   strcmp(*argv, "iif") == 0) {
 			NEXT_ARG();
diff --git a/man/man8/ip-rule.8 b/man/man8/ip-rule.8
index 36e46f1..62df3b0 100644
--- a/man/man8/ip-rule.8
+++ b/man/man8/ip-rule.8
@@ -43,6 +43,14 @@ ip-rule \- routing policy database management
 .IR ADDRESS " ] [ "
 .BR prohibit " | " reject " | " unreachable " ] [ " realms
 .RI "[" SRCREALM "/]" DSTREALM " ]"
+.I  SUPPRESSOR
+
+.ti -8
+.IR SUPPRESSOR " := [ "
+.B  suppress_prefixlength
+.IR NUMBER " ] [ "
+.B  suppress_ifgroup
+.IR GROUP " ]"
 
 .ti -8
 .IR TABLE_ID " := [ "
@@ -217,6 +225,15 @@ the routing table identifier to lookup if the rule selector matches.
 It is also possible to use lookup instead of table.
 
 .TP
+.BI suppress_prefixlength " NUMBER"
+reject routing decisions that have a prefix length of NUMBER or less.
+
+.TP
+.BI suppress_ifgroup " GROUP"
+reject routing decisions that use a device belonging to the interface
+group GROUP.
+
+.TP
 .BI realms " FROM/TO"
 Realms to select if the rule matched and the routing table lookup
 succeeded.  Realm
-- 
1.7.10.4

             reply	other threads:[~2013-08-03 12:23 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-03 12:23 Stefan Tomanek [this message]
2013-08-04 18:56 ` [PATCH iproute2 v2 2/2] ip rule: add route suppression options Stephen Hemminger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130803122316.GN21970@zirkel.wertarbyte.de \
    --to=stefan.tomanek@wertarbyte.de \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).