From: Ajit Khaparde <ajit.khaparde@emulex.com>
To: <netdev@vger.kernel.org>
Subject: [PATCH net 6/7] be2net: Fix to configure VLAN priority for a VF interface.
Date: Fri, 27 Sep 2013 15:18:46 -0500 [thread overview]
Message-ID: <20130927201846.GA4599@emulex.com> (raw)
Thix fix allows the VLAN priority to be configured for a VF interface
via the "ip link set DEVICE vf NUM" path.
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
---
drivers/net/ethernet/emulex/benet/be_main.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 9c25607..ad593ca 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -1212,28 +1212,29 @@ static int be_set_vf_vlan(struct net_device *netdev,
int vf, u16 vlan, u8 qos)
{
struct be_adapter *adapter = netdev_priv(netdev);
+ struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf];
int status = 0;
if (!sriov_enabled(adapter))
return -EPERM;
- if (vf >= adapter->num_vfs || vlan > 4095)
+ if (vf >= adapter->num_vfs || vlan > 4095 || qos > 7)
return -EINVAL;
- if (vlan) {
- if (adapter->vf_cfg[vf].vlan_tag != vlan) {
+ if (vlan || qos) {
+ vlan |= qos << VLAN_PRIO_SHIFT;
+ if (vf_cfg->vlan_tag != vlan) {
/* If this is new value, program it. Else skip. */
- adapter->vf_cfg[vf].vlan_tag = vlan;
-
- status = be_cmd_set_hsw_config(adapter, vlan,
- vf + 1, adapter->vf_cfg[vf].if_handle, 0);
+ vf_cfg->vlan_tag = vlan;
+ status = be_cmd_set_hsw_config(adapter, vlan, vf + 1,
+ vf_cfg->if_handle, 0);
}
} else {
/* Reset Transparent Vlan Tagging. */
- adapter->vf_cfg[vf].vlan_tag = 0;
- vlan = adapter->vf_cfg[vf].def_vid;
+ vf_cfg->vlan_tag = 0;
+ vlan = vf_cfg->def_vid;
status = be_cmd_set_hsw_config(adapter, vlan, vf + 1,
- adapter->vf_cfg[vf].if_handle, 0);
+ vf_cfg->if_handle, 0);
}
--
1.8.1.2
reply other threads:[~2013-09-27 20:18 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130927201846.GA4599@emulex.com \
--to=ajit.khaparde@emulex.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).