netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andreas Herrmann <andreas.herrmann@calxeda.com>
To: Rob Herring <rob.herring@calxeda.com>
Cc: Grant Likely <grant.likely@linaro.org>,
	"David S. Miller" <davem@davemloft.net>,
	netdev@vger.kernel.org
Subject: [PATCH] net: calxedaxgmac: Fix panic caused by MTU change of active interface
Date: Wed, 6 Nov 2013 14:31:27 +0100	[thread overview]
Message-ID: <20131106133126.GL22917@alberich> (raw)

Changing MTU size of an xgmac network interface while it is active can
cause a panic like

  skbuff: skb_over_panic: text:c03bc62c len:1090 put:1090 head:edfb6900 data:edfb6942 tail:0xedfb6d84 end:0xedfb6bc0 dev:eth0
  ------------[ cut here ]------------
  kernel BUG at net/core/skbuff.c:126!
  Internal error: Oops - BUG: 0 [#1] SMP ARM
  Modules linked in:
  CPU: 0 PID: 762 Comm: python Tainted: G        W    3.10.0-00015-g3e33cd7 #309
  task: edcfe000 ti: ed67e000 task.ti: ed67e000
  PC is at skb_panic+0x64/0x70
  LR is at wake_up_klogd+0x5c/0x68

This happens because xgmac_change_mtu modifies dev->mtu before the
network interface is quiesced. And thus there still might be buffers
in use which have a buffer size based on the old MTU.

To fix this I moved the change of dev->mtu after the call to
xgmac_stop.

Another modification is required (in xgmac_stop) to ensure that
xgmac_xmit is really not called anymore (xgmac_tx_complete might wake
up the queue again).

I've tested the fix by switching MTU size every second between 600 and
1500 while network traffic was going on. The test box survived a test
of several hours (until I've stopped it) whereas w/o this fix above
panic occurs after several minutes (at most).

Signed-off-by: Andreas Herrmann <andreas.herrmann@calxeda.com>
---
 drivers/net/ethernet/calxeda/xgmac.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

Patch is against v3.12-48-gbe408cd.

Regards,
Andreas

diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c
index 48f5288..8eb422a 100644
--- a/drivers/net/ethernet/calxeda/xgmac.c
+++ b/drivers/net/ethernet/calxeda/xgmac.c
@@ -1067,6 +1067,10 @@ static int xgmac_stop(struct net_device *dev)
 
 	writel(0, priv->base + XGMAC_DMA_INTR_ENA);
 
+	netif_tx_lock_bh(dev);
+	netif_stop_queue(dev);
+	netif_tx_unlock_bh(dev);
+
 	/* Disable the MAC core */
 	xgmac_mac_disable(priv->base);
 
@@ -1370,11 +1374,8 @@ static int xgmac_change_mtu(struct net_device *dev, int new_mtu)
 	}
 
 	old_mtu = dev->mtu;
-	dev->mtu = new_mtu;
 
 	/* return early if the buffer sizes will not change */
-	if (old_mtu <= ETH_DATA_LEN && new_mtu <= ETH_DATA_LEN)
-		return 0;
 	if (old_mtu == new_mtu)
 		return 0;
 
@@ -1382,8 +1383,9 @@ static int xgmac_change_mtu(struct net_device *dev, int new_mtu)
 	if (!netif_running(dev))
 		return 0;
 
-	/* Bring the interface down and then back up */
+	/* Bring interface down, change mtu and bring interface back up */
 	xgmac_stop(dev);
+	dev->mtu = new_mtu;
 	return xgmac_open(dev);
 }
 
-- 
1.7.9.5

             reply	other threads:[~2013-11-06 13:37 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-06 13:31 Andreas Herrmann [this message]
2013-11-06 19:22 ` [PATCH] net: calxedaxgmac: Fix panic caused by MTU change of active interface Ben Hutchings
2013-11-06 19:25   ` Andreas Herrmann
2013-11-07 11:07 ` [PATCH v2] " Andreas Herrmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20131106133126.GL22917@alberich \
    --to=andreas.herrmann@calxeda.com \
    --cc=davem@davemloft.net \
    --cc=grant.likely@linaro.org \
    --cc=netdev@vger.kernel.org \
    --cc=rob.herring@calxeda.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).