From mboxrd@z Thu Jan 1 00:00:00 1970 From: John Fastabend Subject: [net-next PATCH 1/2] ixgbe: fix build err, num_rx_queues is only available with CONFIG_RPS Date: Fri, 08 Nov 2013 00:50:32 -0800 Message-ID: <20131108085031.6935.61765.stgit@nitbit.x32> References: <20131108084654.6935.36501.stgit@nitbit.x32> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Cc: netdev@vger.kernel.org, davem@davemloft.net, nhorman@tuxdriver.com To: jeffrey.t.kirsher@intel.com Return-path: Received: from mail-oa0-f41.google.com ([209.85.219.41]:43282 "EHLO mail-oa0-f41.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752846Ab3KHIvD (ORCPT ); Fri, 8 Nov 2013 03:51:03 -0500 Received: by mail-oa0-f41.google.com with SMTP id g12so558573oah.14 for ; Fri, 08 Nov 2013 00:51:02 -0800 (PST) In-Reply-To: <20131108084654.6935.36501.stgit@nitbit.x32> Sender: netdev-owner@vger.kernel.org List-ID: In the recent support for layer 2 hardware acceleration, I added a few references to real_num_rx_queues and num_rx_queues which are only available with CONFIG_RPS. The fix is first to remove unnecessary references to num_rx_queues. Because the hardware offload case is limited to cases where RX queues and TX queues are equal we only need a single check. Then wrap the single case in an ifdef. The patch that introduce this is here, commit a6cc0cfa72e0b6d9f2c8fd858aacc32313c4f272 Author: John Fastabend Date: Wed Nov 6 09:54:46 2013 -0800 net: Add layer 2 hardware acceleration operations for macvlan devices Reported-by: kbuild test robot Signed-off-by: John Fastabend --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 607275d..2e17c30 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -4164,7 +4164,7 @@ static void ixgbe_add_mac_filter(struct ixgbe_adapter *adapter, static void ixgbe_fwd_psrtype(struct ixgbe_fwd_adapter *vadapter) { struct ixgbe_adapter *adapter = vadapter->real_adapter; - int rss_i = vadapter->netdev->real_num_rx_queues; + int rss_i = adapter->num_rx_queues_per_pool; struct ixgbe_hw *hw = &adapter->hw; u16 pool = vadapter->pool; u32 psrtype = IXGBE_PSRTYPE_TCPHDR | @@ -4315,8 +4315,6 @@ static int ixgbe_fwd_ring_up(struct net_device *vdev, if (err) goto fwd_queue_err; - queues = min_t(unsigned int, - adapter->num_rx_queues_per_pool, vdev->num_rx_queues); err = netif_set_real_num_rx_queues(vdev, queues); if (err) goto fwd_queue_err; @@ -7540,9 +7538,15 @@ static void *ixgbe_fwd_add(struct net_device *pdev, struct net_device *vdev) struct ixgbe_adapter *adapter = netdev_priv(pdev); int pool, err; +#ifdef CONFIG_RPS + if (vdev->num_rx_queues != vdev->num_tx_queues) { + netdev_info(pdev, "%s: Only supports a single queue count for TX and RX\n", + vdev->name); + return ERR_PTR(-EINVAL); + } +#endif /* Check for hardware restriction on number of rx/tx queues */ - if (vdev->num_rx_queues != vdev->num_tx_queues || - vdev->num_tx_queues > IXGBE_MAX_L2A_QUEUES || + if (vdev->num_tx_queues > IXGBE_MAX_L2A_QUEUES || vdev->num_tx_queues == IXGBE_BAD_L2A_QUEUE) { netdev_info(pdev, "%s: Supports RX/TX Queue counts 1,2, and 4\n", @@ -7566,7 +7570,7 @@ static void *ixgbe_fwd_add(struct net_device *pdev, struct net_device *vdev) /* Enable VMDq flag so device will be set in VM mode */ adapter->flags |= IXGBE_FLAG_VMDQ_ENABLED | IXGBE_FLAG_SRIOV_ENABLED; adapter->ring_feature[RING_F_VMDQ].limit = adapter->num_rx_pools; - adapter->ring_feature[RING_F_RSS].limit = vdev->num_rx_queues; + adapter->ring_feature[RING_F_RSS].limit = vdev->num_tx_queues; /* Force reinit of ring allocation with VMDQ enabled */ err = ixgbe_setup_tc(pdev, netdev_get_num_tc(pdev));