* [PATCH ethtool 3/3] qeth: Display adjacent switch port attributes in ethtool
2013-12-09 6:31 raspl
@ 2013-12-09 6:31 ` raspl
0 siblings, 0 replies; 6+ messages in thread
From: raspl @ 2013-12-09 6:31 UTC (permalink / raw)
To: bhutchings; +Cc: davem, blaschka, netdev, linux-s390
[-- Attachment #1: qeth_add_ethtool_query_switch_port_attributes_support.patch --]
[-- Type: text/plain, Size: 6331 bytes --]
Add support for get_switch_port_attrs() callback in ethtool to display
adjacent switch port's attributes.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Acked-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
---
drivers/s390/net/qeth_core.h | 2
drivers/s390/net/qeth_core_main.c | 79 ++++++++++++++++++++++++++++++++++++++
drivers/s390/net/qeth_core_mpc.h | 17 ++++++++
drivers/s390/net/qeth_l2_main.c | 1
drivers/s390/net/qeth_l3_main.c | 1
5 files changed, 100 insertions(+)
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -914,6 +914,8 @@ struct qeth_cmd_buffer *qeth_wait_for_bu
int qeth_mdio_read(struct net_device *, int, int);
int qeth_snmp_command(struct qeth_card *, char __user *);
int qeth_query_oat_command(struct qeth_card *, char __user *);
+int qeth_core_ethtool_get_switch_port_attrs(struct net_device *,
+ struct ethtool_swport_attrs *);
int qeth_send_control_data(struct qeth_card *, int, struct qeth_cmd_buffer *,
int (*reply_cb)(struct qeth_card *, struct qeth_reply*, unsigned long),
void *reply_param);
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -3036,6 +3036,42 @@ int qeth_query_ipassists(struct qeth_car
}
EXPORT_SYMBOL_GPL(qeth_query_ipassists);
+static int qeth_query_switch_port_attributes_cb(struct qeth_card *card,
+ struct qeth_reply *reply, unsigned long data)
+{
+ struct qeth_ipa_cmd *cmd;
+ struct qeth_switch_info *sw_info;
+ struct qeth_query_switch_attributes *attrs;
+
+ QETH_CARD_TEXT(card, 2, "qsqiatcb");
+ cmd = (struct qeth_ipa_cmd *) data;
+ sw_info = (struct qeth_switch_info *)reply->param;
+ if (cmd->data.setadapterparms.hdr.return_code == 0) {
+ attrs = &cmd->data.setadapterparms.data.query_switch_attributes;
+ sw_info->capabilities = attrs->capabilities;
+ sw_info->settings = attrs->settings;
+ }
+ qeth_default_setadapterparms_cb(card, reply, (unsigned long) cmd);
+
+ return 0;
+}
+
+static int qeth_query_switch_port_attributes(struct qeth_card *card,
+ struct qeth_switch_info *sw_info)
+{
+ struct qeth_cmd_buffer *iob;
+
+ QETH_CARD_TEXT(card, 2, "qswiattr");
+ if (!qeth_adp_supported(card, IPA_SETADP_QUERY_SWITCH_ATTRIBUTES))
+ return -EOPNOTSUPP;
+ if (!netif_carrier_ok(card->dev))
+ return -ENOMEDIUM;
+ iob = qeth_get_adapter_cmd(card, IPA_SETADP_QUERY_SWITCH_ATTRIBUTES,
+ sizeof(struct qeth_ipacmd_setadpparms_hdr));
+ return qeth_send_ipa_cmd(card, iob,
+ qeth_query_switch_port_attributes_cb, sw_info);
+}
+
static int qeth_query_setdiagass_cb(struct qeth_card *card,
struct qeth_reply *reply, unsigned long data)
{
@@ -5696,6 +5732,49 @@ int qeth_core_ethtool_get_settings(struc
}
EXPORT_SYMBOL_GPL(qeth_core_ethtool_get_settings);
+int qeth_core_ethtool_get_switch_port_attrs(struct net_device *netdev,
+ struct ethtool_swport_attrs *attrs)
+{
+ int rc, i;
+ struct qeth_card *card = netdev->ml_priv;
+ struct qeth_switch_info sw_info;
+ static const struct {
+ int qeth_cap;
+ int etht_cap_sup;
+ int etht_cap_enbl;
+ } qattrs[] = {
+ { QETH_SWITCH_FORW_802_1, SUPPORTED_SP_FWD_802_1,
+ ENABLED_SP_FWD_802_1 },
+ { QETH_SWITCH_FORW_REFL_RELAY, SUPPORTED_SP_FWD_RR,
+ ENABLED_SP_FWD_RR },
+ { QETH_SWITCH_CAP_RTE, SUPPORTED_SP_CAP_RTE,
+ ENABLED_SP_CAP_RTE },
+ { QETH_SWITCH_CAP_ECP, SUPPORTED_SP_CAP_ECP,
+ ENABLED_SP_CAP_ECP },
+ { QETH_SWITCH_CAP_VDP, SUPPORTED_SP_CAP_VDP,
+ ENABLED_SP_CAP_VDP }
+ };
+
+ rc = qeth_query_switch_port_attributes(card, &sw_info);
+ if (rc)
+ return rc;
+
+ if (!sw_info.capabilities) {
+ attrs->port_rc = GPORT_RC_LLDP_UNSUP;
+ return 0;
+ }
+ for (i = 0; i < ARRAY_SIZE(qattrs); i++) {
+ if (sw_info.capabilities & qattrs[i].qeth_cap) {
+ attrs->supported |= qattrs[i].etht_cap_sup;
+ if (sw_info.settings & qattrs[i].qeth_cap)
+ attrs->enabled |= qattrs[i].etht_cap_enbl;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(qeth_core_ethtool_get_switch_port_attrs);
+
static int __init qeth_core_init(void)
{
int rc;
--- a/drivers/s390/net/qeth_core_mpc.h
+++ b/drivers/s390/net/qeth_core_mpc.h
@@ -240,6 +240,7 @@ enum qeth_ipa_setadp_cmd {
IPA_SETADP_SET_DIAG_ASSIST = 0x00002000L,
IPA_SETADP_SET_ACCESS_CONTROL = 0x00010000L,
IPA_SETADP_QUERY_OAT = 0x00080000L,
+ IPA_SETADP_QUERY_SWITCH_ATTRIBUTES = 0x00100000L,
};
enum qeth_ipa_mac_ops {
CHANGE_ADDR_READ_MAC = 0,
@@ -404,6 +405,21 @@ struct qeth_qoat_priv {
char *buffer;
};
+#define QETH_SWITCH_FORW_802_1 0x00000001
+#define QETH_SWITCH_FORW_REFL_RELAY 0x00000002
+#define QETH_SWITCH_CAP_RTE 0x00000004
+#define QETH_SWITCH_CAP_ECP 0x00000008
+#define QETH_SWITCH_CAP_VDP 0x00000010
+
+struct qeth_query_switch_attributes {
+ __u8 version;
+ __u8 reserved1;
+ __u16 reserved2;
+ __u32 capabilities;
+ __u32 settings;
+ __u8 reserved3[8];
+};
+
struct qeth_ipacmd_setadpparms_hdr {
__u32 supp_hw_cmds;
__u32 reserved1;
@@ -424,6 +440,7 @@ struct qeth_ipacmd_setadpparms {
struct qeth_snmp_cmd snmp;
struct qeth_set_access_ctrl set_access_ctrl;
struct qeth_query_oat query_oat;
+ struct qeth_query_switch_attributes query_switch_attributes;
__u32 mode;
} data;
} __attribute__ ((packed));
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -911,6 +911,7 @@ static const struct ethtool_ops qeth_l2_
.get_sset_count = qeth_core_get_sset_count,
.get_drvinfo = qeth_core_get_drvinfo,
.get_settings = qeth_core_ethtool_get_settings,
+ .get_switch_port_attrs = qeth_core_ethtool_get_switch_port_attrs,
};
static const struct ethtool_ops qeth_l2_osn_ops = {
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -3198,6 +3198,7 @@ static const struct ethtool_ops qeth_l3_
.get_sset_count = qeth_core_get_sset_count,
.get_drvinfo = qeth_core_get_drvinfo,
.get_settings = qeth_core_ethtool_get_settings,
+ .get_switch_port_attrs = qeth_core_ethtool_get_switch_port_attrs,
};
/*
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index 41ef943..3f85f19 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -738,6 +738,11 @@ struct qeth_rx {
int qdio_err;
};
+struct qeth_switch_info {
+ __u32 capabilities;
+ __u32 settings;
+};
+
#define QETH_NAPI_WEIGHT NAPI_POLL_WEIGHT
struct qeth_card {
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH ethtool 0/3] Display adjacent switch port's attributes
@ 2013-12-09 8:11 raspl
2013-12-09 8:11 ` [PATCH ethtool 1/3] ethtool: Add callback to indicate adjacent switch port attributes raspl
` (3 more replies)
0 siblings, 4 replies; 6+ messages in thread
From: raspl @ 2013-12-09 8:11 UTC (permalink / raw)
To: Ben Hutchings, Stefan Raspl
Cc: David Miller, Frank Blaschka, netdev, linux-s390
This patch series adds a new option to ethtool to display the adjacent switch
port's attributes, as perceived by the NIC, e.g. through respective LLDP
message exchanges.
A patch for the qeth device driver provides a sample exploiter for the new
functionality.
Best regards,
Stefan Raspl
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH ethtool 1/3] ethtool: Add callback to indicate adjacent switch port attributes
2013-12-09 8:11 [PATCH ethtool 0/3] Display adjacent switch port's attributes raspl
@ 2013-12-09 8:11 ` raspl
2013-12-09 8:11 ` [PATCH ethtool 2/3] ethtool: Add option -q to display adjacent switch ports attributes raspl
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: raspl @ 2013-12-09 8:11 UTC (permalink / raw)
To: Ben Hutchings, Stefan Raspl
Cc: David Miller, Frank Blaschka, netdev, linux-s390
[-- Attachment #1: ethtool_add_query_swport_settings.patch --]
[-- Type: text/plain, Size: 4644 bytes --]
Switches supporting LLDP can communicate port attributes to connected devices.
Device drivers capable of accessing this information from the devices can use
the new callback get_switch_port_attrs() to report supported and enabled
settings in the card's adjacent switch port for display in ethtool.
Implementors have to use the respective SUPPORTED_SP_* and ENABLED_SP_* defines
to indicate the current settings.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
---
include/linux/ethtool.h | 3 +++
include/uapi/linux/ethtool.h | 35 +++++++++++++++++++++++++++++++++++
net/core/ethtool.c | 22 ++++++++++++++++++++++
3 files changed, 60 insertions(+)
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -177,6 +177,7 @@ static inline u32 ethtool_rxfh_indir_def
* @get_module_eeprom: Get the eeprom information from the plug-in module
* @get_eee: Get Energy-Efficient (EEE) supported and status.
* @set_eee: Set EEE status (enable/disable) as well as LPI timers.
+ * @get_switch_port_attrs: Get adjacent switch port attributes.
*
* All operations are optional (i.e. the function pointer may be set
* to %NULL) and callers must take this into account. Callers must
@@ -245,6 +246,8 @@ struct ethtool_ops {
struct ethtool_eeprom *, u8 *);
int (*get_eee)(struct net_device *, struct ethtool_eee *);
int (*set_eee)(struct net_device *, struct ethtool_eee *);
+ int (*get_switch_port_attrs)(struct net_device *,
+ struct ethtool_swport_attrs *);
};
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -136,6 +136,22 @@ struct ethtool_eeprom {
};
/**
+ * struct ethtool_swport_attrs - query adjacent switch port attributes
+ * @cmd: ETHTOOL_GPORT
+ * @port_rc: Use GPORT_RC_* as appropriate.
+ * @supported: Forwarding modes and capabilities supported by the switch port,
+ * see SUPPORTED_SP_* flags.
+ * @enabled: Forwarding modes and capabilities currently activated at the
+ * adjacent switch port, see ENABLED_SP_* flags.
+ */
+struct ethtool_swport_attrs {
+ __u32 cmd;
+ __u32 port_rc;
+ __u32 supported;
+ __u32 enabled;
+};
+
+/**
* struct ethtool_eee - Energy Efficient Ethernet information
* @cmd: ETHTOOL_{G,S}EEE
* @supported: Mask of %SUPPORTED_* flags for the speed/duplex combinations
@@ -900,6 +916,7 @@ enum ethtool_sfeatures_retval_bits {
#define ETHTOOL_GMODULEEEPROM 0x00000043 /* Get plug-in module eeprom */
#define ETHTOOL_GEEE 0x00000044 /* Get EEE settings */
#define ETHTOOL_SEEE 0x00000045 /* Set EEE settings */
+#define ETHTOOL_GPORT 0x00000046 /* Get switch port attributes */
/* compatibility with older code */
#define SPARC_ETH_GSET ETHTOOL_GSET
@@ -1067,6 +1084,24 @@ enum ethtool_sfeatures_retval_bits {
#define ETH_MODULE_SFF_8472 0x2
#define ETH_MODULE_SFF_8472_LEN 512
+/* Bad return codes for switch ports */
+#define GPORT_RC_LLDP_UNSUP 1 /* switch port doesn't support */
+ /* required LLDP EVB TLV */
+
+/* Indicates what features the adjacent switch port supports. */
+#define SUPPORTED_SP_FWD_802_1 (1 << 0)
+#define SUPPORTED_SP_FWD_RR (1 << 1)
+#define SUPPORTED_SP_CAP_RTE (1 << 9)
+#define SUPPORTED_SP_CAP_ECP (1 << 10)
+#define SUPPORTED_SP_CAP_VDP (1 << 11)
+
+/* Indicates what features the adjacent switch port has enabled. */
+#define ENABLED_SP_FWD_802_1 (1 << 0)
+#define ENABLED_SP_FWD_RR (1 << 1)
+#define ENABLED_SP_CAP_RTE (1 << 9)
+#define ENABLED_SP_CAP_ECP (1 << 10)
+#define ENABLED_SP_CAP_VDP (1 << 11)
+
/* Reset flags */
/* The reset() operation must clear the flags for the components which
* were actually reset. On successful return, the flags indicate the
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -1446,6 +1446,25 @@ static int ethtool_get_module_eeprom(str
modinfo.eeprom_len);
}
+static int ethtool_get_switch_port_attrs(struct net_device *dev,
+ void __user *useraddr)
+{
+ struct ethtool_swport_attrs attrs = { ETHTOOL_GPORT };
+ int rc;
+
+ if (!dev->ethtool_ops->get_switch_port_attrs)
+ return -EOPNOTSUPP;
+
+ rc = dev->ethtool_ops->get_switch_port_attrs(dev, &attrs);
+ if (rc)
+ return rc;
+
+ if (copy_to_user(useraddr, &attrs, sizeof(attrs)))
+ return -EFAULT;
+
+ return 0;
+}
+
/* The main entry point in this file. Called from net/core/dev_ioctl.c */
int dev_ethtool(struct net *net, struct ifreq *ifr)
@@ -1675,6 +1694,9 @@ int dev_ethtool(struct net *net, struct
case ETHTOOL_GMODULEEEPROM:
rc = ethtool_get_module_eeprom(dev, useraddr);
break;
+ case ETHTOOL_GPORT:
+ rc = ethtool_get_switch_port_attrs(dev, useraddr);
+ break;
default:
rc = -EOPNOTSUPP;
}
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH ethtool 2/3] ethtool: Add option -q to display adjacent switch ports attributes
2013-12-09 8:11 [PATCH ethtool 0/3] Display adjacent switch port's attributes raspl
2013-12-09 8:11 ` [PATCH ethtool 1/3] ethtool: Add callback to indicate adjacent switch port attributes raspl
@ 2013-12-09 8:11 ` raspl
2013-12-09 8:11 ` [PATCH ethtool 3/3] qeth: Display adjacent switch port attributes in ethtool raspl
2013-12-12 9:24 ` [PATCH ethtool 0/3] Display adjacent switch port's attributes Stefan Raspl
3 siblings, 0 replies; 6+ messages in thread
From: raspl @ 2013-12-09 8:11 UTC (permalink / raw)
To: Ben Hutchings, Stefan Raspl
Cc: David Miller, Frank Blaschka, netdev, linux-s390
[-- Attachment #1: ethtool_add_new_option-q.patch --]
[-- Type: text/plain, Size: 6042 bytes --]
Add new option '-q|--query-switch-port' to display information on the
adjacent switch port's settings as perceived by the respective NIC.
In the output,
- unsupported attributes are indicated as such ('unsupported'),
- supported but disabled attributes display 'no', and
- enabled attributes display 'yes'.
Attributes supported by this patch are
- forwarding modes:
standard (802.1) and reflective relay (RR) aka hairpin
- edge virtual bridging (EVB) related capabilities:
edge control protocol (ECP), VSI discovery and configuration protocol (VDP),
and retransmission timer exponent (RTE).
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
---
ethtool-copy.h | 35 +++++++++++++++++++++++++++++
ethtool.8 | 6 +++++
ethtool.c | 68 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 109 insertions(+)
--- a/ethtool-copy.h
+++ b/ethtool-copy.h
@@ -348,6 +348,22 @@ struct ethtool_pauseparam {
__u32 tx_pause;
};
+/**
+ * struct ethtool_swport_attrs - query adjacent switch port attributes
+ * @cmd: ETHTOOL_GPORT
+ * @port_rc: Use GPORT_RC_* as appropriate.
+ * @supported: Forwarding modes and capabilities supported by the switch port,
+ * see SUPPORTED_SP_* flags.
+ * @enabled: Forwarding modes and capabilities currently activated at the
+ * adjacent switch port, see ENABLED_SP_* flags.
+ */
+struct ethtool_swport_attrs {
+ __u32 cmd;
+ __u32 port_rc;
+ __u32 supported;
+ __u32 enabled;
+};
+
#define ETH_GSTRING_LEN 32
enum ethtool_stringset {
ETH_SS_TEST = 0,
@@ -900,6 +916,7 @@ enum ethtool_sfeatures_retval_bits {
#define ETHTOOL_GMODULEEEPROM 0x00000043 /* Get plug-in module eeprom */
#define ETHTOOL_GEEE 0x00000044 /* Get EEE settings */
#define ETHTOOL_SEEE 0x00000045 /* Set EEE settings */
+#define ETHTOOL_GPORT 0x00000046 /* Get switch port attributes */
/* compatibility with older code */
#define SPARC_ETH_GSET ETHTOOL_GSET
@@ -1067,6 +1084,24 @@ enum ethtool_sfeatures_retval_bits {
#define ETH_MODULE_SFF_8472 0x2
#define ETH_MODULE_SFF_8472_LEN 512
+/* Bad return codes for switch ports */
+#define GPORT_RC_LLDP_UNSUP 1 /* switch port doesn't support */
+ /* required LLDP EVB TLV */
+
+/* Indicates what features the adjacent switch port supports. */
+#define SUPPORTED_SP_FWD_802_1 (1 << 0)
+#define SUPPORTED_SP_FWD_RR (1 << 1)
+#define SUPPORTED_SP_CAP_RTE (1 << 9)
+#define SUPPORTED_SP_CAP_ECP (1 << 10)
+#define SUPPORTED_SP_CAP_VDP (1 << 11)
+
+/* Indicates what features the adjacent switch port has enabled. */
+#define ENABLED_SP_FWD_802_1 (1 << 0)
+#define ENABLED_SP_FWD_RR (1 << 1)
+#define ENABLED_SP_CAP_RTE (1 << 9)
+#define ENABLED_SP_CAP_ECP (1 << 10)
+#define ENABLED_SP_CAP_VDP (1 << 11)
+
/* Reset flags */
/* The reset() operation must clear the flags for the components which
* were actually reset. On successful return, the flags indicate the
--- a/ethtool.8
+++ b/ethtool.8
@@ -214,6 +214,9 @@ ethtool \- query or control network driv
.B ethtool \-P|\-\-show\-permaddr
.I devname
.HP
+.B ethtool \-q|\-\-query-switch-port
+.I devname
+.HP
.B ethtool \-r|\-\-negotiate
.I devname
.HP
@@ -485,6 +488,9 @@ Length of time to perform phys-id, in se
.B \-P \-\-show\-permaddr
Queries the specified network device for permanent hardware address.
.TP
+.B \-q \-\-query-switch-port
+Queries the specified Ethernet device for adjacent switch port's attributes.
+.TP
.B \-r \-\-negotiate
Restarts auto-negotiation on the specified Ethernet device, if
auto-negotiation is enabled.
--- a/ethtool.c
+++ b/ethtool.c
@@ -714,6 +714,54 @@ static int dump_drvinfo(struct ethtool_d
return 0;
}
+static const char *port_setting(struct ethtool_swport_attrs *attrs,
+ u32 supported, u32 enabled)
+{
+ char *rc = "unsupported";
+
+ if (supported & attrs->supported) {
+ if (enabled & attrs->enabled)
+ rc = "yes";
+ else
+ rc = "no";
+ }
+
+ return rc;
+}
+
+static int dump_switch_port_attrs(const char *devname,
+ struct ethtool_swport_attrs *attrs)
+{
+ static const struct {
+ const char *name;
+ int type; /* 0=forwarding, 1=capability */
+ u32 supported;
+ u32 enabled;
+ } port_defs[] = {
+ { "802.1", 0, SUPPORTED_SP_FWD_802_1, ENABLED_SP_FWD_802_1 },
+ { "RR", 0, SUPPORTED_SP_FWD_RR, ENABLED_SP_FWD_RR },
+ { "RTE", 1, SUPPORTED_SP_CAP_RTE, ENABLED_SP_CAP_RTE },
+ { "ECP", 1, SUPPORTED_SP_CAP_ECP, ENABLED_SP_CAP_ECP },
+ { "VDP", 1, SUPPORTED_SP_CAP_VDP, ENABLED_SP_CAP_VDP },
+ };
+ int i;
+
+ if (attrs->port_rc == GPORT_RC_LLDP_UNSUP) {
+ fprintf(stderr, "Required LLDP EVB TLV not supported by "
+ "adjacent switch\n");
+ return 1;
+ }
+ fprintf(stdout, "Adjacent switch port attributes of %s:\n",
+ devname);
+ for (i = 0; i < ARRAY_SIZE(port_defs); i++)
+ fprintf(stdout, "%s %s: %s\n", port_defs[i].name,
+ (port_defs[i].type ? "capability" : "forwarding"),
+ port_setting(attrs, port_defs[i].supported,
+ port_defs[i].enabled));
+
+ return 0;
+}
+
static int parse_wolopts(char *optstr, u32 *data)
{
*data = 0;
@@ -2863,6 +2911,24 @@ static int do_phys_id(struct cmd_context
return err;
}
+static int do_switch_port(struct cmd_context *ctx)
+{
+ struct ethtool_swport_attrs attrs;
+ int err;
+
+ if (ctx->argc != 0)
+ exit_bad_args();
+
+ attrs.cmd = ETHTOOL_GPORT;
+ err = send_ioctl(ctx, &attrs);
+ if (err < 0) {
+ perror("Cannot get driver information");
+ return 1;
+ }
+
+ return dump_switch_port_attrs(ctx->devname, &attrs);
+}
+
static int do_gstats(struct cmd_context *ctx)
{
struct ethtool_gstrings *strings;
@@ -3799,6 +3865,8 @@ static const struct option {
{ "-p|--identify", 1, do_phys_id,
"Show visible port identification (e.g. blinking)",
" [ TIME-IN-SECONDS ]\n" },
+ { "-q|--query-switch-port", 1, do_switch_port, "Query adjacent "
+ "switch port attributes" },
{ "-t|--test", 1, do_test, "Execute adapter self test",
" [ online | offline | external_lb ]\n" },
{ "-S|--statistics", 1, do_gstats, "Show adapter statistics" },
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH ethtool 3/3] qeth: Display adjacent switch port attributes in ethtool
2013-12-09 8:11 [PATCH ethtool 0/3] Display adjacent switch port's attributes raspl
2013-12-09 8:11 ` [PATCH ethtool 1/3] ethtool: Add callback to indicate adjacent switch port attributes raspl
2013-12-09 8:11 ` [PATCH ethtool 2/3] ethtool: Add option -q to display adjacent switch ports attributes raspl
@ 2013-12-09 8:11 ` raspl
2013-12-12 9:24 ` [PATCH ethtool 0/3] Display adjacent switch port's attributes Stefan Raspl
3 siblings, 0 replies; 6+ messages in thread
From: raspl @ 2013-12-09 8:11 UTC (permalink / raw)
To: Ben Hutchings, Stefan Raspl
Cc: David Miller, Frank Blaschka, netdev, linux-s390
[-- Attachment #1: qeth_add_ethtool_query_switch_port_attributes_support.patch --]
[-- Type: text/plain, Size: 6331 bytes --]
Add support for get_switch_port_attrs() callback in ethtool to display
adjacent switch port's attributes.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Acked-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
---
drivers/s390/net/qeth_core.h | 2
drivers/s390/net/qeth_core_main.c | 79 ++++++++++++++++++++++++++++++++++++++
drivers/s390/net/qeth_core_mpc.h | 17 ++++++++
drivers/s390/net/qeth_l2_main.c | 1
drivers/s390/net/qeth_l3_main.c | 1
5 files changed, 100 insertions(+)
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -914,6 +914,8 @@ struct qeth_cmd_buffer *qeth_wait_for_bu
int qeth_mdio_read(struct net_device *, int, int);
int qeth_snmp_command(struct qeth_card *, char __user *);
int qeth_query_oat_command(struct qeth_card *, char __user *);
+int qeth_core_ethtool_get_switch_port_attrs(struct net_device *,
+ struct ethtool_swport_attrs *);
int qeth_send_control_data(struct qeth_card *, int, struct qeth_cmd_buffer *,
int (*reply_cb)(struct qeth_card *, struct qeth_reply*, unsigned long),
void *reply_param);
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -3036,6 +3036,42 @@ int qeth_query_ipassists(struct qeth_car
}
EXPORT_SYMBOL_GPL(qeth_query_ipassists);
+static int qeth_query_switch_port_attributes_cb(struct qeth_card *card,
+ struct qeth_reply *reply, unsigned long data)
+{
+ struct qeth_ipa_cmd *cmd;
+ struct qeth_switch_info *sw_info;
+ struct qeth_query_switch_attributes *attrs;
+
+ QETH_CARD_TEXT(card, 2, "qsqiatcb");
+ cmd = (struct qeth_ipa_cmd *) data;
+ sw_info = (struct qeth_switch_info *)reply->param;
+ if (cmd->data.setadapterparms.hdr.return_code == 0) {
+ attrs = &cmd->data.setadapterparms.data.query_switch_attributes;
+ sw_info->capabilities = attrs->capabilities;
+ sw_info->settings = attrs->settings;
+ }
+ qeth_default_setadapterparms_cb(card, reply, (unsigned long) cmd);
+
+ return 0;
+}
+
+static int qeth_query_switch_port_attributes(struct qeth_card *card,
+ struct qeth_switch_info *sw_info)
+{
+ struct qeth_cmd_buffer *iob;
+
+ QETH_CARD_TEXT(card, 2, "qswiattr");
+ if (!qeth_adp_supported(card, IPA_SETADP_QUERY_SWITCH_ATTRIBUTES))
+ return -EOPNOTSUPP;
+ if (!netif_carrier_ok(card->dev))
+ return -ENOMEDIUM;
+ iob = qeth_get_adapter_cmd(card, IPA_SETADP_QUERY_SWITCH_ATTRIBUTES,
+ sizeof(struct qeth_ipacmd_setadpparms_hdr));
+ return qeth_send_ipa_cmd(card, iob,
+ qeth_query_switch_port_attributes_cb, sw_info);
+}
+
static int qeth_query_setdiagass_cb(struct qeth_card *card,
struct qeth_reply *reply, unsigned long data)
{
@@ -5696,6 +5732,49 @@ int qeth_core_ethtool_get_settings(struc
}
EXPORT_SYMBOL_GPL(qeth_core_ethtool_get_settings);
+int qeth_core_ethtool_get_switch_port_attrs(struct net_device *netdev,
+ struct ethtool_swport_attrs *attrs)
+{
+ int rc, i;
+ struct qeth_card *card = netdev->ml_priv;
+ struct qeth_switch_info sw_info;
+ static const struct {
+ int qeth_cap;
+ int etht_cap_sup;
+ int etht_cap_enbl;
+ } qattrs[] = {
+ { QETH_SWITCH_FORW_802_1, SUPPORTED_SP_FWD_802_1,
+ ENABLED_SP_FWD_802_1 },
+ { QETH_SWITCH_FORW_REFL_RELAY, SUPPORTED_SP_FWD_RR,
+ ENABLED_SP_FWD_RR },
+ { QETH_SWITCH_CAP_RTE, SUPPORTED_SP_CAP_RTE,
+ ENABLED_SP_CAP_RTE },
+ { QETH_SWITCH_CAP_ECP, SUPPORTED_SP_CAP_ECP,
+ ENABLED_SP_CAP_ECP },
+ { QETH_SWITCH_CAP_VDP, SUPPORTED_SP_CAP_VDP,
+ ENABLED_SP_CAP_VDP }
+ };
+
+ rc = qeth_query_switch_port_attributes(card, &sw_info);
+ if (rc)
+ return rc;
+
+ if (!sw_info.capabilities) {
+ attrs->port_rc = GPORT_RC_LLDP_UNSUP;
+ return 0;
+ }
+ for (i = 0; i < ARRAY_SIZE(qattrs); i++) {
+ if (sw_info.capabilities & qattrs[i].qeth_cap) {
+ attrs->supported |= qattrs[i].etht_cap_sup;
+ if (sw_info.settings & qattrs[i].qeth_cap)
+ attrs->enabled |= qattrs[i].etht_cap_enbl;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(qeth_core_ethtool_get_switch_port_attrs);
+
static int __init qeth_core_init(void)
{
int rc;
--- a/drivers/s390/net/qeth_core_mpc.h
+++ b/drivers/s390/net/qeth_core_mpc.h
@@ -240,6 +240,7 @@ enum qeth_ipa_setadp_cmd {
IPA_SETADP_SET_DIAG_ASSIST = 0x00002000L,
IPA_SETADP_SET_ACCESS_CONTROL = 0x00010000L,
IPA_SETADP_QUERY_OAT = 0x00080000L,
+ IPA_SETADP_QUERY_SWITCH_ATTRIBUTES = 0x00100000L,
};
enum qeth_ipa_mac_ops {
CHANGE_ADDR_READ_MAC = 0,
@@ -404,6 +405,21 @@ struct qeth_qoat_priv {
char *buffer;
};
+#define QETH_SWITCH_FORW_802_1 0x00000001
+#define QETH_SWITCH_FORW_REFL_RELAY 0x00000002
+#define QETH_SWITCH_CAP_RTE 0x00000004
+#define QETH_SWITCH_CAP_ECP 0x00000008
+#define QETH_SWITCH_CAP_VDP 0x00000010
+
+struct qeth_query_switch_attributes {
+ __u8 version;
+ __u8 reserved1;
+ __u16 reserved2;
+ __u32 capabilities;
+ __u32 settings;
+ __u8 reserved3[8];
+};
+
struct qeth_ipacmd_setadpparms_hdr {
__u32 supp_hw_cmds;
__u32 reserved1;
@@ -424,6 +440,7 @@ struct qeth_ipacmd_setadpparms {
struct qeth_snmp_cmd snmp;
struct qeth_set_access_ctrl set_access_ctrl;
struct qeth_query_oat query_oat;
+ struct qeth_query_switch_attributes query_switch_attributes;
__u32 mode;
} data;
} __attribute__ ((packed));
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -911,6 +911,7 @@ static const struct ethtool_ops qeth_l2_
.get_sset_count = qeth_core_get_sset_count,
.get_drvinfo = qeth_core_get_drvinfo,
.get_settings = qeth_core_ethtool_get_settings,
+ .get_switch_port_attrs = qeth_core_ethtool_get_switch_port_attrs,
};
static const struct ethtool_ops qeth_l2_osn_ops = {
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -3198,6 +3198,7 @@ static const struct ethtool_ops qeth_l3_
.get_sset_count = qeth_core_get_sset_count,
.get_drvinfo = qeth_core_get_drvinfo,
.get_settings = qeth_core_ethtool_get_settings,
+ .get_switch_port_attrs = qeth_core_ethtool_get_switch_port_attrs,
};
/*
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index 41ef943..3f85f19 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -738,6 +738,11 @@ struct qeth_rx {
int qdio_err;
};
+struct qeth_switch_info {
+ __u32 capabilities;
+ __u32 settings;
+};
+
#define QETH_NAPI_WEIGHT NAPI_POLL_WEIGHT
struct qeth_card {
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH ethtool 0/3] Display adjacent switch port's attributes
2013-12-09 8:11 [PATCH ethtool 0/3] Display adjacent switch port's attributes raspl
` (2 preceding siblings ...)
2013-12-09 8:11 ` [PATCH ethtool 3/3] qeth: Display adjacent switch port attributes in ethtool raspl
@ 2013-12-12 9:24 ` Stefan Raspl
3 siblings, 0 replies; 6+ messages in thread
From: Stefan Raspl @ 2013-12-12 9:24 UTC (permalink / raw)
To: Ben Hutchings, Stefan Raspl
Cc: David Miller, Frank Blaschka, netdev, linux-s390
Am 09.12.2013 09:11, schrieb raspl@linux.vnet.ibm.com:
> This patch series adds a new option to ethtool to display the adjacent switch
> port's attributes, as perceived by the NIC, e.g. through respective LLDP
> message exchanges.
> A patch for the qeth device driver provides a sample exploiter for the new
> functionality.
>
> Best regards,
> Stefan Raspl
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
Please ignore this stray patch series - the one posted 12/12 is the
real thing.
Regards
Stefan Raspl
--
Linux on System z & Virtualization Development
IBM Deutschland Research & Development GmbH
Vorsitzender des Aufsichtsrats: Martina Koederitz
Geschäftsführer: Dirk Wittkopp
Sitz der Gesellschaft: Böblingen
Registergericht: Amtsgericht Stuttgart, HRB 243294
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-12-12 9:25 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-12-09 8:11 [PATCH ethtool 0/3] Display adjacent switch port's attributes raspl
2013-12-09 8:11 ` [PATCH ethtool 1/3] ethtool: Add callback to indicate adjacent switch port attributes raspl
2013-12-09 8:11 ` [PATCH ethtool 2/3] ethtool: Add option -q to display adjacent switch ports attributes raspl
2013-12-09 8:11 ` [PATCH ethtool 3/3] qeth: Display adjacent switch port attributes in ethtool raspl
2013-12-12 9:24 ` [PATCH ethtool 0/3] Display adjacent switch port's attributes Stefan Raspl
-- strict thread matches above, loose matches on Subject: below --
2013-12-09 6:31 raspl
2013-12-09 6:31 ` [PATCH ethtool 3/3] qeth: Display adjacent switch port attributes in ethtool raspl
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).