From: Steffen Klassert <steffen.klassert@secunet.com>
To: netdev@vger.kernel.org
Cc: Christophe Gouault <christophe.gouault@6wind.com>,
Saurabh Mohan <saurabh.mohan@vyatta.com>
Subject: [PATCH RFC v2 13/13] vti4: Support inter address family tunneling.
Date: Mon, 16 Dec 2013 10:28:03 +0100 [thread overview]
Message-ID: <20131216092803.GD31491@secunet.com> (raw)
In-Reply-To: <20131216091835.GQ31491@secunet.com>
With this patch we can tunnel ipv6 traffic via a vti4
interface. A vti4 interface can now have an ipv6 address
and ipv6 traffic can be routed via a vti4 interface.
The resulting traffic is xfrm transformed and tunneled
throuhg ipv4 if matching IPsec policies and states are
present.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
---
net/ipv4/ip_vti.c | 48 ++++++++++++++++++++++++++++++++++--------------
1 file changed, 34 insertions(+), 14 deletions(-)
diff --git a/net/ipv4/ip_vti.c b/net/ipv4/ip_vti.c
index f269310..8a2934c 100644
--- a/net/ipv4/ip_vti.c
+++ b/net/ipv4/ip_vti.c
@@ -34,6 +34,7 @@
#include <linux/init.h>
#include <linux/netfilter_ipv4.h>
#include <linux/if_ether.h>
+#include <linux/icmpv6.h>
#include <net/sock.h>
#include <net/ip.h>
@@ -110,26 +111,16 @@ static int vti_rcv_cb(struct sk_buff *skb, int err)
return 0;
}
-/* This function assumes it is being called from dev_queue_xmit()
- * and that skb is filled properly by that function.
- */
-static netdev_tx_t vti_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t vti_xmit(struct sk_buff *skb, struct net_device *dev,
+ struct flowi *fl)
{
struct ip_tunnel *tunnel = netdev_priv(dev);
struct dst_entry *dst;
struct net_device *tdev; /* Device to other host */
- struct flowi fl;
int err;
- if (skb->protocol != htons(ETH_P_IP))
- goto tx_error;
-
- memset(&fl, 0, sizeof(fl));
- skb->mark = be32_to_cpu(tunnel->parms.o_key);
- xfrm_decode_session(skb, &fl, AF_INET);
-
dst_hold(skb_dst(skb));
- dst = xfrm_lookup(tunnel->net, skb_dst(skb), &fl, NULL, 0);
+ dst = xfrm_lookup(tunnel->net, skb_dst(skb), fl, NULL, 0);
if (IS_ERR(dst)) {
dev->stats.tx_carrier_errors++;
goto tx_error_icmp;
@@ -161,7 +152,6 @@ static netdev_tx_t vti_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
tunnel->err_count = 0;
}
- memset(IPCB(skb), 0, sizeof(*IPCB(skb)));
skb_scrub_packet(skb, !net_eq(tunnel->net, dev_net(dev)));
skb_dst_set(skb, dst);
skb->dev = skb_dst(skb)->dev;
@@ -180,6 +170,36 @@ tx_error:
return NETDEV_TX_OK;
}
+/* This function assumes it is being called from dev_queue_xmit()
+ * and that skb is filled properly by that function.
+ */
+static netdev_tx_t vti_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct ip_tunnel *tunnel = netdev_priv(dev);
+ struct flowi fl;
+
+ memset(&fl, 0, sizeof(fl));
+
+ skb->mark = be32_to_cpu(tunnel->parms.o_key);
+
+ switch (skb->protocol) {
+ case htons(ETH_P_IP):
+ xfrm_decode_session(skb, &fl, AF_INET);
+ memset(IPCB(skb), 0, sizeof(*IPCB(skb)));
+ break;
+ case htons(ETH_P_IPV6):
+ xfrm_decode_session(skb, &fl, AF_INET6);
+ memset(IP6CB(skb), 0, sizeof(*IP6CB(skb)));
+ break;
+ default:
+ dev->stats.tx_errors++;
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+ }
+
+ return vti_xmit(skb, dev, &fl);
+}
+
static int
vti_tunnel_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
--
1.7.9.5
next prev parent reply other threads:[~2013-12-16 9:28 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-16 9:18 [PATCH RFC v2 0/13] vti4: prepare namespace and interfamily support Steffen Klassert
2013-12-16 9:19 ` [PATCH RFC v2 01/13] xfrm4: Add IPsec protocol multiplexer Steffen Klassert
2013-12-16 9:19 ` [PATCH RFC v2 02/13] esp4: Use the IPsec protocol multiplexer API Steffen Klassert
2013-12-16 9:20 ` [PATCH RFC v2 03/13] esp4: Export esp4_err Steffen Klassert
2013-12-16 9:21 ` [PATCH RFC v2 04/13] ah4: Use the IPsec protocol multiplexer API Steffen Klassert
2013-12-16 9:21 ` [PATCH RFC v2 05/13] ah4: Export ah4_err Steffen Klassert
2013-12-16 9:22 ` [PATCH RFC v2 06/13] ipcomp4: Use the IPsec protocol multiplexer API Steffen Klassert
2013-12-16 9:23 ` [PATCH RFC v2 07/13] ipcomp4: Export ipcomp4_err Steffen Klassert
2013-12-16 9:23 ` [PATCH RFC v2 08/13] xfrm: Add xfrm_tunnel_skb_cb to the skb common buffer Steffen Klassert
2013-12-16 12:54 ` Nicolas Dichtel
2013-12-16 13:02 ` Steffen Klassert
2013-12-16 9:24 ` [PATCH RFC v2 09/13] ip_tunnel: Make vti work with i_key set Steffen Klassert
2013-12-16 9:25 ` [PATCH RFC v2 10/13] vti: Update the ipv4 side to use it's own receive hook Steffen Klassert
2013-12-16 9:26 ` [PATCH RFC v2 11/13] xfrm4: Remove xfrm_tunnel_notifier Steffen Klassert
2013-12-16 9:27 ` [PATCH RFC v2 12/13] vti4: Use the on xfrm_lookup returned dst_entry directly Steffen Klassert
2013-12-16 9:28 ` Steffen Klassert [this message]
2014-01-07 16:11 ` [PATCH RFC v2 0/13] vti4: prepare namespace and interfamily support Christophe Gouault
2014-01-07 19:45 ` Christophe Gouault
2014-01-14 7:51 ` Steffen Klassert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131216092803.GD31491@secunet.com \
--to=steffen.klassert@secunet.com \
--cc=christophe.gouault@6wind.com \
--cc=netdev@vger.kernel.org \
--cc=saurabh.mohan@vyatta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).