From: Borislav Petkov <bp@alien8.de>
To: Realtek linux nic maintainers <nic_swsd@realtek.com>
Cc: Francois Romieu <romieu@fr.zoreil.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: r8169: INFO: trying to register non-static key.
Date: Tue, 25 Feb 2014 00:22:13 +0100 [thread overview]
Message-ID: <20140224232212.GB18598@pd.tnic> (raw)
In-Reply-To: <20140224231748.GA18598@pd.tnic>
Oh boy, there's more of the trace which appears much further down in
dmesg and the printk timestamps are all messed up!?! See below.
On Tue, Feb 25, 2014 at 12:17:48AM +0100, Borislav Petkov wrote:
> I get this on latest -rc4 + tip/master:
>
> [ 9.172287] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
> [ 9.178461] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
> [ 9.186137] r8169 0000:02:00.0: irq 45 for MSI/MSI-X
> [ 9.195943] INFO: trying to register non-static key.
> [ 9.196031] the code is fine but needs lockdep annotation.
> [ 9.196031] turning off the locking correctness validator.
> [ 9.196031] CPU: 1 PID: 933 Comm: modprobe Not tainted 3.14.0-rc4+ #1
> [ 9.196031] Hardware name: Acer AOA150/ , BIOS v0.3309 10/06/2008
> [ 9.196031] 00000000 00000000 f5e49a48 c15aa25c c1c68b58 f5e49ac0 c10913fc c174bc50
> [ 9.196031] 0001488a 79da0cc3 00000000 00000006 f5efa6d0 c1a34240 00000001 f6eab240
> [ 9.196031] f5e49aa8 c107a4e6 00000000 f6eab250 f5d43658 00000002 000d48ae 00000000
> [ 9.196031] Call Trace:
> [ 9.196031] [<c15aa25c>] dump_stack+0x4b/0x75
> [ 9.196031] [<c10913fc>] __lock_acquire+0x1a0c/0x1b70
> [ 9.196031] [<c107a4e6>] ? sched_clock_local+0x46/0x150
> [ 9.196031] [<c107a8a8>] ? sched_clock_cpu+0xc8/0x140
> [ 9.196031] [<c1091bdb>] lock_acquire+0x8b/0x1b0
> [ 9.196031] [<c14fab4b>] ? dev_get_stats+0x5b/0x100
> [ 9.196031] [<f81f1db6>] rtl8169_get_stats64+0x66/0x240 [r8169]
> [ 9.196031] [<c14fab4b>] ? dev_get_stats+0x5b/0x100
> [ 9.196031] [<c14fab4b>] dev_get_stats+0x5b/0x100
> [ 9.196031] [<c151163f>] rtnl_fill_ifinfo+0x4cf/0xb30
> [ 9.196031] [<c1134c43>] ? ksize+0x13/0xa0
> [ 9.196031] [<c14f1827>] ? __alloc_skb+0x77/0x250
> [ 9.196031] [<c1511d12>] rtmsg_ifinfo+0x72/0xf0
> [ 9.196031] [<c150531e>] register_netdevice+0x45e/0x4c0
> [ 9.196031] [<c150539b>] register_netdev+0x1b/0x30
> [ 9.196031] [<f81f3e8b>] rtl_init_one+0x69b/0xbd0 [r8169]
> [ 9.337799] uhci_hcd: USB Universal Host Controller Interface driver
[ 9.196031] [<c10759c7>] ? preempt_count_sub+0x67/0xf0
[ 9.196031] [<c12aca87>] pci_device_probe+0x67/0xc0
[ 9.196031] [<c11a2815>] ? sysfs_create_link+0x25/0x40
[ 9.196031] [<c13e1107>] really_probe+0x57/0x1d0
[ 9.196031] [<c12ac552>] ? pci_match_device+0xb2/0xc0
[ 9.196031] [<c13e136f>] __driver_attach+0x8f/0xa0
[ 9.196031] [<c13e12e0>] ? __device_attach+0x60/0x60
[ 9.196031] [<c13df7bf>] bus_for_each_dev+0x4f/0x80
[ 9.196031] [<c13e0cce>] driver_attach+0x1e/0x20
[ 9.196031] [<c13e12e0>] ? __device_attach+0x60/0x60
[ 9.196031] [<c13e0987>] bus_add_driver+0x147/0x200
[ 9.196031] [<c13e1929>] driver_register+0x59/0xe0
[ 9.196031] [<f82a7000>] ? 0xf82a6fff
[ 9.196031] [<c12ac67a>] __pci_register_driver+0x4a/0x50
[ 9.671150] usb 3-5: new high-speed USB device number 2 using ehci-pci
[ 9.196031] [<f82a7017>] rtl8169_pci_driver_init+0x17/0x19 [r8169]
[ 9.196031] [<c10004a2>] do_one_initcall+0xf2/0x140
[ 9.196031] [<c108a38b>] ? up_read+0x1b/0x30
[ 9.196031] [<c106be82>] ? __blocking_notifier_call_chain+0x62/0xa0
[ 9.196031] [<c10c0d43>] load_module+0x1ae3/0x2290
[ 9.196031] [<c10c1576>] SyS_init_module+0x86/0xc0
[ 9.196031] [<c15b2505>] sysenter_do_call+0x12/0x36
[ 9.705200] r8169 0000:02:00.0 eth0: RTL8102e at 0xf82e2000, 00:1e:68:fe:2f:2b, XID 04a00000 IRQ 45
Breakage all over the place :-(
--
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--
next prev parent reply other threads:[~2014-02-24 23:22 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-24 23:17 r8169: INFO: trying to register non-static key Borislav Petkov
2014-02-24 23:22 ` Borislav Petkov [this message]
2014-02-25 1:12 ` [PATCH] r8169: initialize rtl8169_stats seqlock Kyle McMartin
2014-02-25 1:32 ` David Miller
2014-02-25 7:50 ` Borislav Petkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140224232212.GB18598@pd.tnic \
--to=bp@alien8.de \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nic_swsd@realtek.com \
--cc=romieu@fr.zoreil.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).