Re: [PATCH net-next v6 0/3] The huawei_cdc_ncm driver / E3276 problem

["Pasi Kärkkäinen" <pasik-X3B1VOXEql0@public.gmane.org>]

On Fri, Mar 14, 2014 at 10:24:51AM +0100, Bjørn Mork wrote:
> Pasi Kärkkäinen <pasik-X3B1VOXEql0@public.gmane.org> writes:
> 
> > # ifconfig wwp0s26u1u5i1
> > wwp0s26u1u5i1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
> >         inet 10.8.219.204  netmask 255.255.255.248  broadcast 10.8.219.207
> >         inet6 fe80::e5b:8fff:fe27:9a64  prefixlen 64  scopeid 0x20<link>
> >         ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)
> >         RX packets 0  bytes 0 (0.0 B)
> >         RX errors 1493  dropped 0  overruns 0  frame 0
> >
> > Note the RX errors.. ? 
> 
> 
> Yes, that is not expected and is quite possibly hiding the explanation.
> 

Ok, good to know.

> Could you do a usbmon dump to try to capture the contents of the USB
> buffers we drop here?  See
> https://www.kernel.org/doc/Documentation/usb/usbmon.txt
> 
> Note that the text interface may truncate the buffers too early for the
> result to be useful.  wireshark/thsark will for example allow you to
> capture the whole buffer (when snooping on the "usbmonX" interface - not
> the netdev!)
> 

I'll try that.. 

> We also have a few debug messages in the driver for different types of
> errors we drop.  Turning on those might explain something (assuming you
> have DYNAMIC_DEBUG enabled):
> 
>   ethtool -s wwp0s26u1u5i1 msglvl rx_err on
> 
> Note that these will be logged at "debug" level, so you need to turn on
> logging/showing such messages as well.
> 

# uname -a
Linux localhost.localdomain 3.13.6-200.fc20.x86_64 #1 SMP Fri Mar 7 17:02:28 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux

# grep -i DYNAMIC_DEBUG /boot/config-3.13.6-200.fc20.x86_64
CONFIG_DYNAMIC_DEBUG=y

# echo 8 > /proc/sys/kernel/printk
# cat /proc/sys/kernel/printk
8       4       1       7

# ethtool -s wwp0s26u1u5i1 msglvl rx_err on

Is that enough? I don't see any errors logged in "dmesg" output,
but the RX errors counters do keep increasing in ifconfig output.. 

> 
> 
> Bjørn

Thanks,


-- Pasi

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html