* [PATCH net,stable] net: cdc_ncm: fix control message ordering
@ 2014-03-17 15:25 Bjørn Mork
[not found] ` <1395069918-18585-1-git-send-email-bjorn-yOkvZcmFvRU@public.gmane.org>
0 siblings, 1 reply; 2+ messages in thread
From: Bjørn Mork @ 2014-03-17 15:25 UTC (permalink / raw)
To: netdev
Cc: linux-usb, Oliver Neukum, Alexey Orishko,
Pasi Kärkkäinen, Thomas Schäfer, Bjørn Mork
This is a context modified revert of commit 6a9612e2cb22
("net: cdc_ncm: remove ncm_parm field") which introduced
a NCM specification violation, causing setup errors for
some devices. These errors resulted in the device and
host disagreeing about shared settings, with complete
failure to communicate as the end result.
The NCM specification require that many of the NCM specific
control reuests are sent only while the NCM Data Interface
is in alternate setting 0. Reverting the commit ensures that
we follow this requirement.
Fixes: 6a9612e2cb22 ("net: cdc_ncm: remove ncm_parm field")
Reported-and-tested-by: Pasi Kärkkäinen <pasik@iki.fi>
Reported-by: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
---
This needs to go to v3.14 and v3.13.x stable. The bug was introduced
in v3.13.
Bjørn
drivers/net/usb/cdc_ncm.c | 48 ++++++++++++++++++++++-----------------------
include/linux/usb/cdc_ncm.h | 1 +
2 files changed, 24 insertions(+), 25 deletions(-)
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index dbff290ed0e4..d350d2795e10 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -68,7 +68,6 @@ static struct usb_driver cdc_ncm_driver;
static int cdc_ncm_setup(struct usbnet *dev)
{
struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
- struct usb_cdc_ncm_ntb_parameters ncm_parm;
u32 val;
u8 flags;
u8 iface_no;
@@ -82,22 +81,22 @@ static int cdc_ncm_setup(struct usbnet *dev)
err = usbnet_read_cmd(dev, USB_CDC_GET_NTB_PARAMETERS,
USB_TYPE_CLASS | USB_DIR_IN
|USB_RECIP_INTERFACE,
- 0, iface_no, &ncm_parm,
- sizeof(ncm_parm));
+ 0, iface_no, &ctx->ncm_parm,
+ sizeof(ctx->ncm_parm));
if (err < 0) {
dev_err(&dev->intf->dev, "failed GET_NTB_PARAMETERS\n");
return err; /* GET_NTB_PARAMETERS is required */
}
/* read correct set of parameters according to device mode */
- ctx->rx_max = le32_to_cpu(ncm_parm.dwNtbInMaxSize);
- ctx->tx_max = le32_to_cpu(ncm_parm.dwNtbOutMaxSize);
- ctx->tx_remainder = le16_to_cpu(ncm_parm.wNdpOutPayloadRemainder);
- ctx->tx_modulus = le16_to_cpu(ncm_parm.wNdpOutDivisor);
- ctx->tx_ndp_modulus = le16_to_cpu(ncm_parm.wNdpOutAlignment);
+ ctx->rx_max = le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize);
+ ctx->tx_max = le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize);
+ ctx->tx_remainder = le16_to_cpu(ctx->ncm_parm.wNdpOutPayloadRemainder);
+ ctx->tx_modulus = le16_to_cpu(ctx->ncm_parm.wNdpOutDivisor);
+ ctx->tx_ndp_modulus = le16_to_cpu(ctx->ncm_parm.wNdpOutAlignment);
/* devices prior to NCM Errata shall set this field to zero */
- ctx->tx_max_datagrams = le16_to_cpu(ncm_parm.wNtbOutMaxDatagrams);
- ntb_fmt_supported = le16_to_cpu(ncm_parm.bmNtbFormatsSupported);
+ ctx->tx_max_datagrams = le16_to_cpu(ctx->ncm_parm.wNtbOutMaxDatagrams);
+ ntb_fmt_supported = le16_to_cpu(ctx->ncm_parm.bmNtbFormatsSupported);
/* there are some minor differences in NCM and MBIM defaults */
if (cdc_ncm_comm_intf_is_mbim(ctx->control->cur_altsetting)) {
@@ -146,7 +145,7 @@ static int cdc_ncm_setup(struct usbnet *dev)
}
/* inform device about NTB input size changes */
- if (ctx->rx_max != le32_to_cpu(ncm_parm.dwNtbInMaxSize)) {
+ if (ctx->rx_max != le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize)) {
__le32 dwNtbInMaxSize = cpu_to_le32(ctx->rx_max);
err = usbnet_write_cmd(dev, USB_CDC_SET_NTB_INPUT_SIZE,
@@ -162,14 +161,6 @@ static int cdc_ncm_setup(struct usbnet *dev)
dev_dbg(&dev->intf->dev, "Using default maximum transmit length=%d\n",
CDC_NCM_NTB_MAX_SIZE_TX);
ctx->tx_max = CDC_NCM_NTB_MAX_SIZE_TX;
-
- /* Adding a pad byte here simplifies the handling in
- * cdc_ncm_fill_tx_frame, by making tx_max always
- * represent the real skb max size.
- */
- if (ctx->tx_max % usb_maxpacket(dev->udev, dev->out, 1) == 0)
- ctx->tx_max++;
-
}
/*
@@ -439,6 +430,10 @@ advance:
goto error2;
}
+ /* initialize data interface */
+ if (cdc_ncm_setup(dev))
+ goto error2;
+
/* configure data interface */
temp = usb_set_interface(dev->udev, iface_no, data_altsetting);
if (temp) {
@@ -453,12 +448,6 @@ advance:
goto error2;
}
- /* initialize data interface */
- if (cdc_ncm_setup(dev)) {
- dev_dbg(&intf->dev, "cdc_ncm_setup() failed\n");
- goto error2;
- }
-
usb_set_intfdata(ctx->data, dev);
usb_set_intfdata(ctx->control, dev);
@@ -475,6 +464,15 @@ advance:
dev->hard_mtu = ctx->tx_max;
dev->rx_urb_size = ctx->rx_max;
+ /* cdc_ncm_setup will override dwNtbOutMaxSize if it is
+ * outside the sane range. Adding a pad byte here if necessary
+ * simplifies the handling in cdc_ncm_fill_tx_frame, making
+ * tx_max always represent the real skb max size.
+ */
+ if (ctx->tx_max != le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize) &&
+ ctx->tx_max % usb_maxpacket(dev->udev, dev->out, 1) == 0)
+ ctx->tx_max++;
+
return 0;
error2:
diff --git a/include/linux/usb/cdc_ncm.h b/include/linux/usb/cdc_ncm.h
index c3fa80745996..2c14d9cdd57a 100644
--- a/include/linux/usb/cdc_ncm.h
+++ b/include/linux/usb/cdc_ncm.h
@@ -88,6 +88,7 @@
#define cdc_ncm_data_intf_is_mbim(x) ((x)->desc.bInterfaceProtocol == USB_CDC_MBIM_PROTO_NTB)
struct cdc_ncm_ctx {
+ struct usb_cdc_ncm_ntb_parameters ncm_parm;
struct hrtimer tx_timer;
struct tasklet_struct bh;
--
1.9.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-03-18 19:58 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-03-17 15:25 [PATCH net,stable] net: cdc_ncm: fix control message ordering Bjørn Mork
[not found] ` <1395069918-18585-1-git-send-email-bjorn-yOkvZcmFvRU@public.gmane.org>
2014-03-18 19:58 ` David Miller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).