From: Thomas Gleixner <tglx@linutronix.de>
To: LKML <linux-kernel@vger.kernel.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>,
Marc Kleine-Budde <mkl@pengutronix.de>,
Markus Pargmann <mpa@pengutronix.de>,
Benedikt Spranger <b.spranger@linutronix.de>,
linux-can@vger.kernel.org, netdev@vger.kernel.org
Subject: [patch 10/12] can: c_can: Store dlc private
Date: Tue, 18 Mar 2014 17:19:14 -0000 [thread overview]
Message-ID: <20140318171127.684183642@linutronix.de> (raw)
In-Reply-To: 20140318171007.528610837@linutronix.de
[-- Attachment #1: can-c_can-store-dlc-private.patch --]
[-- Type: text/plain, Size: 3316 bytes --]
We can avoid the HW access in TX cleanup path for retrieving the DLC
of the sent package if we store the DLC in a private array.
Ideally this should be handled in the can_echo_skb functions, but I
leave that exercise to the CAN folks.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
drivers/net/can/c_can/c_can.c | 28 +---------------------------
drivers/net/can/c_can/c_can.h | 28 ++++++++++++++++++++++++++++
2 files changed, 29 insertions(+), 27 deletions(-)
Index: linux/drivers/net/can/c_can/c_can.c
===================================================================
--- linux.orig/drivers/net/can/c_can/c_can.c
+++ linux/drivers/net/can/c_can/c_can.c
@@ -145,33 +145,6 @@
#define IF_RX 0
#define IF_TX 1
-/*
- * IFx register masks:
- * allow easy operation on 16-bit registers when the
- * argument is 32-bit instead
- */
-#define IFX_WRITE_LOW_16BIT(x) ((x) & 0xFFFF)
-#define IFX_WRITE_HIGH_16BIT(x) (((x) & 0xFFFF0000) >> 16)
-
-/* message object split */
-#define C_CAN_NO_OF_OBJECTS 32
-#define C_CAN_MSG_OBJ_RX_NUM 16
-#define C_CAN_MSG_OBJ_TX_NUM 16
-
-#define C_CAN_MSG_OBJ_RX_FIRST 1
-#define C_CAN_MSG_OBJ_RX_LAST (C_CAN_MSG_OBJ_RX_FIRST + \
- C_CAN_MSG_OBJ_RX_NUM - 1)
-
-#define C_CAN_MSG_OBJ_TX_FIRST (C_CAN_MSG_OBJ_RX_LAST + 1)
-#define C_CAN_MSG_OBJ_TX_LAST (C_CAN_MSG_OBJ_TX_FIRST + \
- C_CAN_MSG_OBJ_TX_NUM - 1)
-
-#define C_CAN_MSG_OBJ_RX_SPLIT 9
-#define C_CAN_MSG_RX_LOW_LAST (C_CAN_MSG_OBJ_RX_SPLIT - 1)
-
-#define C_CAN_NEXT_MSG_OBJ_MASK (C_CAN_MSG_OBJ_TX_NUM - 1)
-#define RECEIVE_OBJECT_BITS 0x0000ffff
-
/* status interrupt */
#define STATUS_INTERRUPT 0x8000
@@ -537,6 +510,7 @@ static netdev_tx_t c_can_start_xmit(stru
/* prepare message object for transmission */
c_can_write_msg_object(dev, IF_TX, frame, msg_obj_no);
+ priv->dlc[msg_obj_no - C_CAN_MSG_OBJ_TX_FIRST] = frame->can_dlc;
can_put_echo_skb(skb, dev, msg_obj_no - C_CAN_MSG_OBJ_TX_FIRST);
/*
Index: linux/drivers/net/can/c_can/c_can.h
===================================================================
--- linux.orig/drivers/net/can/c_can/c_can.h
+++ linux/drivers/net/can/c_can/c_can.h
@@ -22,6 +22,33 @@
#ifndef C_CAN_H
#define C_CAN_H
+/*
+ * IFx register masks:
+ * allow easy operation on 16-bit registers when the
+ * argument is 32-bit instead
+ */
+#define IFX_WRITE_LOW_16BIT(x) ((x) & 0xFFFF)
+#define IFX_WRITE_HIGH_16BIT(x) (((x) & 0xFFFF0000) >> 16)
+
+/* message object split */
+#define C_CAN_NO_OF_OBJECTS 32
+#define C_CAN_MSG_OBJ_RX_NUM 16
+#define C_CAN_MSG_OBJ_TX_NUM 16
+
+#define C_CAN_MSG_OBJ_RX_FIRST 1
+#define C_CAN_MSG_OBJ_RX_LAST (C_CAN_MSG_OBJ_RX_FIRST + \
+ C_CAN_MSG_OBJ_RX_NUM - 1)
+
+#define C_CAN_MSG_OBJ_TX_FIRST (C_CAN_MSG_OBJ_RX_LAST + 1)
+#define C_CAN_MSG_OBJ_TX_LAST (C_CAN_MSG_OBJ_TX_FIRST + \
+ C_CAN_MSG_OBJ_TX_NUM - 1)
+
+#define C_CAN_MSG_OBJ_RX_SPLIT 9
+#define C_CAN_MSG_RX_LOW_LAST (C_CAN_MSG_OBJ_RX_SPLIT - 1)
+
+#define C_CAN_NEXT_MSG_OBJ_MASK (C_CAN_MSG_OBJ_TX_NUM - 1)
+#define RECEIVE_OBJECT_BITS 0x0000ffff
+
enum reg {
C_CAN_CTRL_REG = 0,
C_CAN_CTRL_EX_REG,
@@ -173,6 +200,7 @@ struct c_can_priv {
u32 __iomem *raminit_ctrlreg;
unsigned int instance;
void (*raminit) (const struct c_can_priv *priv, bool enable);
+ u32 dlc[C_CAN_MSG_OBJ_TX_NUM];
};
struct net_device *alloc_c_can_dev(void);
next prev parent reply other threads:[~2014-03-18 17:19 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-18 17:19 [patch 00/12] can: c_can: Fix a series of serious bugs and improve the performance Thomas Gleixner
2014-03-18 17:19 ` [patch 01/12] can: c_can: Wait for CONTROL_INIT to be cleared Thomas Gleixner
2014-03-18 18:11 ` Marc Kleine-Budde
2014-03-18 18:19 ` Thomas Gleixner
2014-03-18 17:19 ` [patch 02/12] can: c_can: Fix hardware raminit function Thomas Gleixner
2014-03-18 18:38 ` Marc Kleine-Budde
2014-03-18 22:15 ` Thomas Gleixner
2014-03-19 6:37 ` Oliver Hartkopp
2014-03-19 9:22 ` Thomas Gleixner
2014-03-18 17:19 ` [patch 03/12] can: c_can: Make it SMP safe Thomas Gleixner
2014-03-18 18:46 ` Marc Kleine-Budde
2014-03-18 19:40 ` Thomas Gleixner
2014-03-18 17:19 ` [patch 04/12] can: c_can: Fix buffer ordering for real Thomas Gleixner
2014-03-18 17:19 ` [patch 05/12] can: c_can: Fix the lost message handling Thomas Gleixner
2014-03-18 17:19 ` [patch 06/12] can: c_can: Remove braindamaged EOB exit Thomas Gleixner
2014-03-18 17:19 ` [patch 08/12] can: c_can: Makethe code readable Thomas Gleixner
2014-03-18 17:37 ` Joe Perches
2014-03-18 18:23 ` Thomas Gleixner
2014-03-18 18:27 ` [patch 08/12 V2] " Thomas Gleixner
2014-03-18 17:19 ` [patch 07/12] can: c_can: Provide protection in the xmit path Thomas Gleixner
2014-03-18 17:19 ` [patch 09/12] can: c_can: Reduce register access for real Thomas Gleixner
2014-03-18 17:19 ` Thomas Gleixner [this message]
2014-03-18 17:19 ` [patch 11/12] can: c_can: Simplify TX interrupt cleanup Thomas Gleixner
2014-03-18 17:19 ` [patch 12/12] can: c_can: Avoid led toggling for every packet Thomas Gleixner
2014-03-18 20:18 ` can: c_can: Reduce interrupt load by 50% Thomas Gleixner
2014-03-18 20:35 ` Joe Perches
2014-03-18 20:43 ` Thomas Gleixner
2014-03-18 21:27 ` Joe Perches
2014-03-31 22:35 ` [patch 00/12] can: c_can: Fix a series of serious bugs and improve the performance Thomas Gleixner
2014-04-01 8:09 ` Marc Kleine-Budde
2014-04-01 9:07 ` Thomas Gleixner
2014-04-01 9:09 ` Marc Kleine-Budde
2014-04-01 21:29 ` Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140318171127.684183642@linutronix.de \
--to=tglx@linutronix.de \
--cc=b.spranger@linutronix.de \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=mpa@pengutronix.de \
--cc=netdev@vger.kernel.org \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).