From: "John W. Linville" <linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
To: davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org
Cc: linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: pull request: wireless-next 2014-03-31
Date: Mon, 31 Mar 2014 15:31:19 -0400 [thread overview]
Message-ID: <20140331193118.GE17412@tuxdriver.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 8241 bytes --]
Dave,
Please accept this one last round of general wireless updates for
the 3.15 merge window!
For the Bluetooth bits, Gustavo says:
"Here follow another set of patches to 3.15. This is mostly a bug fix
pull request with the exception of one commit from Marcel which adds
tracking to the current configured LE scan type parameter."
Beyond that, notable bits include some final refactoring of rtl8180
and the addition of the rtl8187se driver, fixes for a number of
problems identified by Dan Carpenter and his static analysis tools,
and a handful of other bits here and there.
Please let me know if there are problems!
Thanks,
John
---
The following changes since commit 9109e17f7c3ace48629397b44db5ce06bf168644:
Merge branch 'filter-next' (2014-03-31 00:45:49 -0400)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next.git for-davem
for you to fetch changes up to 96da266e77637ae892b196f377908c51fa9f2d1a:
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem (2014-03-31 15:22:17 -0400)
----------------------------------------------------------------
Adam Lee (2):
rtlwifi: add MSI interrupts mode support
rtlwifi: rtl8188ee: enable MSI interrupts mode
Alexey Khoroshilov (1):
rtl8187: fix use after free on failure path in rtl8187_probe()
Amitkumar Karwar (8):
Bluetooth: btmrvl: don't consume all vendor specific events
mwifiex: corner case NULL pointer dereference fix
mwifiex: correction in sleep confirm command sequence number
mwifiex: cancel pending commands during host sleep
mwifiex: scan command preparation failure handling
mwifiex: cancel pending commands for signal
mwifiex: use timeout variant for wait_event_interruptible
mwifiex: fix spinlock bad magic bug
Andrea Merello (24):
rtl8180: fix DMA register are written two times
rtl8180: rationalize TX queues
rtl818x: add registers for rtl8187se
rtl8180: add rtl8187se chip type
rtl8180: add rtl8187se fields to TX descriptor
rtl8180: add basic rate configuration support for rtl8187se
rtl8180: support for rtl8187se RX descriptors
rtl8180: add ISR for rtl8187se
rtl8180: introduce functions to enable/disable ints and add support for rtl8187se
rtl8180: don't write MAR registers for rtl8187se
rtl8180: add TX queue mapping and support for rtl8187se
rtl8180: config carbus register for rtl8187se
rtl8180: add rtl8187se params to eeprom reading
rtl8180: introduce functions for setting ANAPARAM 2 and 3 params
rtl8180: add RF code for rtl8225 zebra v4
rtl8180: add rtl8187se HW initialization
rtl8180: add ERP configuration for rtl8187se
rtl8180: make sure RTL818X_MSR_ENEDCA is set for rtl8187se
rtl8180: add WMM parameters configuration for rtl8187se
rtl8180: detect rtl8187se card
rtl8180: enable rtl8187se support
rtl818x: Update Kconfig for rtl8187se
rtl8187: fix compile warning
rtl8180: don't use weird trick to access "far" registers
Dan Carpenter (1):
rsi: rsi_91x: misleading debug printk
Daniel Kim (1):
brcmfmac: use mfp if required from user-space
Joe Perches (4):
rtlwifi: Remove addressof casts to same type
carl9170: Remove casts of pointer to same type
mwifiex: Remove casts of pointer to same type
rtlwifi: Remove casts of pointer to same type
Johan Hedberg (11):
Bluetooth: Fix passkey endianess in user_confirm and notify_passkey
Bluetooth: Fix address value for early disconnection events
Bluetooth: Fix potential NULL pointer dereference in SMP
Bluetooth: Add missing cmd_status handler for LE_Start_Encryption
Bluetooth: Fix SMP confirmation callback handling
Bluetooth: Add SMP flag to track which side is the initiator
Bluetooth: Don't try to confirm locally initiated SMP pairing
Bluetooth: Remove LTK re-encryption procedure
Bluetooth: Fix potential NULL pointer dereference in smp_conn_security
Bluetooth: Remove unnecessary assignment in SMP
Bluetooth: Fix returning peer address in pending connect state
John W. Linville (2):
Merge branch 'for-upstream' of git://git.kernel.org/.../bluetooth/bluetooth-next
Merge branch 'master' of git://git.kernel.org/.../linville/wireless-next into for-davem
Marcel Holtmann (1):
Bluetooth: Track current configured LE scan type parameter
Rafał Miłecki (1):
bcma: gpio: register 32 GPIOs on BCM5357
Thomas Gleixner (1):
Bluetooth: bluecard: Use del_timer_sync() in teardown path
drivers/bcma/driver_gpio.c | 9 +-
drivers/bluetooth/bluecard_cs.c | 2 +-
drivers/bluetooth/btmrvl_main.c | 11 +-
drivers/net/wireless/ath/carl9170/rx.c | 2 +-
.../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 15 +-
.../net/wireless/brcm80211/include/brcmu_wifi.h | 3 +
drivers/net/wireless/mwifiex/cmdevt.c | 11 +-
drivers/net/wireless/mwifiex/main.c | 3 +-
drivers/net/wireless/mwifiex/main.h | 1 +
drivers/net/wireless/mwifiex/pcie.c | 7 +-
drivers/net/wireless/mwifiex/scan.c | 19 +-
drivers/net/wireless/mwifiex/sdio.c | 2 +
drivers/net/wireless/mwifiex/sta_ioctl.c | 9 +-
drivers/net/wireless/mwifiex/tdls.c | 6 +-
drivers/net/wireless/mwifiex/usb.c | 1 +
drivers/net/wireless/rsi/rsi_91x_mgmt.c | 3 +-
drivers/net/wireless/rtl818x/Kconfig | 4 +-
drivers/net/wireless/rtl818x/rtl8180/Makefile | 2 +-
drivers/net/wireless/rtl818x/rtl8180/dev.c | 691 ++++++++++++++++++---
drivers/net/wireless/rtl818x/rtl8180/rtl8180.h | 64 +-
drivers/net/wireless/rtl818x/rtl8180/rtl8225.c | 1 +
drivers/net/wireless/rtl818x/rtl8180/rtl8225se.c | 475 ++++++++++++++
drivers/net/wireless/rtl818x/rtl8180/rtl8225se.h | 61 ++
drivers/net/wireless/rtl818x/rtl8187/dev.c | 6 +-
drivers/net/wireless/rtl818x/rtl818x.h | 258 ++++++--
drivers/net/wireless/rtlwifi/core.c | 2 +-
drivers/net/wireless/rtlwifi/pci.c | 69 +-
drivers/net/wireless/rtlwifi/ps.c | 19 +-
drivers/net/wireless/rtlwifi/rtl8188ee/dm.c | 5 +-
drivers/net/wireless/rtlwifi/rtl8188ee/fw.c | 4 +-
drivers/net/wireless/rtlwifi/rtl8188ee/hw.c | 66 +-
drivers/net/wireless/rtlwifi/rtl8188ee/sw.c | 1 +
drivers/net/wireless/rtlwifi/rtl8188ee/trx.c | 4 +-
drivers/net/wireless/rtlwifi/rtl8192ce/hw.c | 14 +-
drivers/net/wireless/rtlwifi/rtl8192se/hw.c | 14 +-
drivers/net/wireless/rtlwifi/rtl8723ae/dm.c | 5 +-
drivers/net/wireless/rtlwifi/rtl8723ae/hw.c | 67 +-
drivers/net/wireless/rtlwifi/rtl8723ae/trx.c | 4 +-
drivers/net/wireless/rtlwifi/rtl8723be/dm.c | 2 +-
drivers/net/wireless/rtlwifi/rtl8723be/hw.c | 64 +-
drivers/net/wireless/rtlwifi/rtl8723be/trx.c | 4 +-
.../net/wireless/rtlwifi/rtl8723com/fw_common.c | 4 +-
include/net/bluetooth/hci_core.h | 3 +-
net/bluetooth/hci_event.c | 63 +-
net/bluetooth/l2cap_sock.c | 3 +-
net/bluetooth/mgmt.c | 20 +-
net/bluetooth/rfcomm/sock.c | 3 +-
net/bluetooth/smp.c | 87 ++-
net/bluetooth/smp.h | 7 +-
49 files changed, 1805 insertions(+), 395 deletions(-)
create mode 100644 drivers/net/wireless/rtl818x/rtl8180/rtl8225se.c
create mode 100644 drivers/net/wireless/rtl818x/rtl8180/rtl8225se.h
--
John W. Linville Someday the world will need a hero, and you
linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org might be all we have. Be ready.
[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]
next reply other threads:[~2014-03-31 19:31 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-31 19:31 John W. Linville [this message]
[not found] ` <20140331193118.GE17412-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
2014-03-31 21:09 ` pull request: wireless-next 2014-03-31 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140331193118.GE17412@tuxdriver.com \
--to=linville-2xusbdqka4r54taoqtywwq@public.gmane.org \
--cc=davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).