From: Flavio Leitner <fbl@redhat.com>
To: netdev@vger.kernel.org
Subject: RSS is not efficient when forwarding
Date: Thu, 3 Jul 2014 19:44:08 -0300 [thread overview]
Message-ID: <20140703224408.GA2343@t520.home> (raw)
Hi,
I have a simple router setup which forwards traffic from
one ixgbe 82599ES to another ixgbe of the same model.
kernel: 3.16.0-rc2-00262-ga921e2a
p2p1: 192.168.155.1/24 is the gateway of the LAN
p2p2: 192.168.156.1/24 is the gateway of the other LAN
While the ARP is resolving, I can see the packets being spread
among all the 8 queues (8 online CPUs) available and that is fine.
However, as soon as the TCP traffic starts, all streams are
merged to rx-queue-0 which overwhelms one single CPU, so the
total throughput is about 4Gbits/sec.
I can see the driver sending different skb->hash for each stream,
so it can't be the NIC.
Also, if I run a local http on the router, the skb->hash pattern
doesn't change, but the workload is spread among all CPUs.
debug output while reproducing all the streams on rx-queue-0:
[...]
[11685.885093] ixgbe_rx_skb:1713 skb(ffff880222a77200) hash: 0xC2AF4A27
[11685.891454] ixgbe_rx_skb:1713 skb(ffff880222a77200) hash: 0x8C5B749D
[11685.897820] ixgbe_rx_skb:1713 skb(ffff880222a77200) hash: 0xA33BA6D5
[11690.845032] net_ratelimit: 3276406 callbacks suppressed
[...]
Any idea why all TCP streams are going to a single rx queue?
Thanks,
fbl
next reply other threads:[~2014-07-03 22:44 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-03 22:44 Flavio Leitner [this message]
2014-07-04 19:36 ` RSS is not efficient when forwarding (ixgbe) Flavio Leitner
2014-07-05 16:09 ` Tom Herbert
2014-07-07 10:55 ` Flavio Leitner
2014-07-07 16:33 ` Skidmore, Donald C
2014-07-08 0:28 ` Flavio Leitner
2014-07-08 17:09 ` Carlos Carvalho
2014-07-08 17:21 ` Flavio Leitner
2014-07-08 17:32 ` Carlos Carvalho
2014-07-09 5:22 ` Flavio Leitner
2014-07-10 0:08 ` Carlos Carvalho
2014-07-10 1:14 ` Flavio Leitner
2014-07-11 0:11 ` Carlos Carvalho
2014-07-11 14:11 ` Skidmore, Donald C
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140703224408.GA2343@t520.home \
--to=fbl@redhat.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).