From mboxrd@z Thu Jan 1 00:00:00 1970 From: Boris BREZILLON Subject: Re: [PATCH v2 0/2] ARM: at91: remove phy fixup for sama5d3xek boards Date: Wed, 9 Jul 2014 18:34:42 +0200 Message-ID: <20140709183442.14b8aef8@bbrezillon> References: <1403777615-25685-1-git-send-email-boris.brezillon@free-electrons.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: Boris BREZILLON , Nicolas Ferre , Jean-Christophe Plagniol-Villard , Alexandre Belloni , Andrew Victor , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, "David S. Miller" , netdev@vger.kernel.org To: Bo Shen Return-path: In-Reply-To: <1403777615-25685-1-git-send-email-boris.brezillon@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-Id: netdev.vger.kernel.org Hello Bo, I know you're quite busy, but if you have some time could you test this series on both CPU Modules (Embest and Ronetix): I only own the Embest one. Best Regards, Boris On Thu, 26 Jun 2014 12:13:33 +0200 Boris BREZILLON wrote: > Hello, > > This patch removes a board specific hook for sama5d3xek boards from the > sama5d3 generic DT board file. > > This hook (which register a phy fixup configuring board specific delays > in the ksz9021 ethernet phy) is now replaced by the appropriate DT > properties definitions in the sama5d3xcm.dtsi file. > > Best Regards, > > Boris > > Changes since v1: > - fix txc-skew-ps and rxc-skew-ps delays > - remove phy address info to handle Ronetix and Embest HW designs > > Boris BREZILLON (2): > ARM: at91/dt: describe rgmii ethernet phy connected to sama5d3xek > boards > ARM: at91: remove phy fixup for sama5d3xek boards > > arch/arm/boot/dts/sama5d3xcm.dtsi | 15 +++++++++++++++ > arch/arm/mach-at91/board-dt-sama5.c | 22 ---------------------- > 2 files changed, 15 insertions(+), 22 deletions(-) > -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com