netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* Figuring out how vti works
@ 2014-09-15 14:20 Joe M
  2014-09-17  5:28 ` Steffen Klassert
  0 siblings, 1 reply; 7+ messages in thread
From: Joe M @ 2014-09-15 14:20 UTC (permalink / raw)
  To: netdev

[-- Attachment #1: Type: text/plain, Size: 3531 bytes --]

Hello Steffen Klassert,

Very sorry for this bother.

I could not figure out how vti works with ipsec and your patch was the
latest to ip_vti.c. If you cannot help, please excuse me.

I cannot get the vpn traffic to get on the vti tunnel. tcpdump on vti
does not show anything. I think the tunnel lookup code, for some
reason, is not able to use the "vtil" tunnel.

The pings worked fine if I remove the ip_vti and ip_tunnel modules,
the "mark=1" from /etc/ipsec.conf and the iptables mangle rules to
set-mark.

This is with strongswan 5.2.0. Can you please help?

This is my setup on moon (master hostname)

cat /etc/ipsec.conf
# /etc/ipsec.conf - strongSwan IPsec configuration file

config setup

conn %default
        ikelifetime=60m
        keylife=20m
        rekeymargin=3m
        keyingtries=1
        keyexchange=ikev2
        mobike=no

conn master-bnglr
        leftid="C=CH, O=strongSwan, CN=master"
        leftcert=masterCert.der
        left=192.168.0.11
        leftsubnet=192.168.0.0/24
        rightid="C=CH, O=strongSwan, CN=bnglr"
        right=%any
        rightsubnet=192.168.1.0/24
        auto=add
        mark=1


sudo cat /etc/ipsec.secrets
# /etc/ipsec.secrets - strongSwan IPsec secrets file

  : RSA masterKey.der


sudo ip tunnel list
vtil: ip/ip  remote 192.168.1.232  local 192.168.0.11  ttl inherit ikey 0  okey 1
ip_vti0: ip/ip  remote any  local any  ttl inherit  nopmtudisc key 0

sudo ip route list
default via 192.168.0.1 dev enp4s0  metric 202
127.0.0.0/8 dev lo  scope host
192.168.0.0/24 dev enp4s0  proto kernel  scope link  src 192.168.0.11
metric 202
192.168.1.0/24 dev vtil  scope link


sudo ip xfrm policy
src 192.168.1.0/24 dst 192.168.0.0/24
        dir fwd priority 2883
        mark 1/0xffffffff
        tmpl src <bnglr public ip> dst 192.168.0.11
                proto esp reqid 2 mode tunnel
src 192.168.1.0/24 dst 192.168.0.0/24
        dir in priority 2883
        mark 1/0xffffffff
        tmpl src <bnglr public ip> dst 192.168.0.11
                proto esp reqid 2 mode tunnel
src 192.168.0.0/24 dst 192.168.1.0/24
        dir out priority 2883
        mark 1/0xffffffff
        tmpl src 192.168.0.11 dst <bnglr public ip>
                proto esp reqid 2 mode tunnel
src 0.0.0.0/0 dst 0.0.0.0/0
        socket in priority 0
src 0.0.0.0/0 dst 0.0.0.0/0
        socket out priority 0
src 0.0.0.0/0 dst 0.0.0.0/0
        socket in priority 0
src 0.0.0.0/0 dst 0.0.0.0/0
        socket out priority 0
src ::/0 dst ::/0
        socket in priority 0
src ::/0 dst ::/0
        socket out priority 0
src ::/0 dst ::/0
        socket in priority 0
src ::/0 dst ::/0
        socket out priority 0

sudo ip xfrm state
src 192.168.0.11 dst <bnglr public ip>
        proto esp spi 0xc3b23fb1 reqid 2 mode tunnel
        replay-window 32 flag af-unspec
        mark 1/0xffffffff
        auth-trunc hmac(sha1) 0x33f17d71abbc9ccdbef83ecba9e1c0711c3767a0 96
        enc cbc(aes) 0xe790b24d9e9f71aec28f8ed00013f411
        encap type espinudp sport 4500 dport 8993 addr 0.0.0.0
src <bnglr public ip> dst 192.168.0.11
        proto esp spi 0xc8bcf9b0 reqid 2 mode tunnel
        replay-window 32 flag af-unspec
        mark 1/0xffffffff
        auth-trunc hmac(sha1) 0xb780288b0cf20aa7f010552837cc03a04e29198a 96
        enc cbc(aes) 0xd0db2ec7e9bb83cbc6a9d20feb6eab49
        encap type espinudp sport 8993 dport 4500 addr 0.0.0.0


I tried setting the mangle rules to set-mark but that did not help. I
could not find any more documentation.

Thanks again and Sorry for the bother,
Joe


[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

^ permalink raw reply	[flat|nested] 7+ messages in thread
end of thread, other threads:[~2014-09-18 15:00 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-09-15 14:20 Figuring out how vti works Joe M
2014-09-17  5:28 ` Steffen Klassert
2014-09-17 23:04   ` Joe M
2014-09-18  5:08     ` Joe M
2014-09-18  9:20       ` Steffen Klassert
2014-09-18  9:06     ` Steffen Klassert
2014-09-18 15:00   ` Joe M

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).