Re: [net-next PATCH 28/29] fm10k: Add support for ptp to hw specific files

[Richard Cochran <richardcochran@gmail.com>]

On Thu, Sep 18, 2014 at 06:40:30PM -0400, Alexander Duyck wrote:

> +static s32 fm10k_adjust_systime_pf(struct fm10k_hw *hw, s32 ppb)
> +{
> +	u64 systime_adjust;
> +
> +	/* if sw_addr is not set we don't have switch register access */
> +	if (!hw->sw_addr)
> +		return ppb ? FM10K_ERR_PARAM : 0;
> +
> +	/* we must convert the value from parts per billion to parts per
> +	 * 2^48 cycles.  In addition we can only use the upper 30 bits of
> +	 * the value when making the change so that restricts us futher.
> +	 * The math for this is equivilent to ABS(pps) * 2^40 / 10 ^ 9,

Huh? Converting ppb to parts per 2^48 should be (ppb * 2^48 / 10^9),
shouldn't it?

Did you mean, "we must convert ... to parts per 2^40 cycles" ?

Also, the comment about using the upper 30 bits is not clear. Do you
mean that the hardware ignores the two least significant bits?

> +	 * the function below is roughly ABS(pps) * 2 ^ 31 / 5 ^ 9 which
> +	 * is as close as we can get to the exact value with numbers as
> +	 * small as possible.
> +	 */
> +	systime_adjust = (ppb < 0) ? -ppb : ppb;
> +	systime_adjust <<= 31;
> +	do_div(systime_adjust, 1953125);
> +
> +	/* verify the requested adjustment value is in range */
> +	if (systime_adjust > FM10K_SW_SYSTIME_ADJUST_MASK)
> +		return FM10K_ERR_PARAM;
> +
> +	if (ppb < 0)
> +		systime_adjust |= FM10K_SW_SYSTIME_ADJUST_DIR_NEGATIVE;
> +
> +	fm10k_write_sw_reg(hw, FM10K_SW_SYSTIME_ADJUST, (u32)systime_adjust);
> +
> +	return 0;
> +}

Thanks,
Richard