Re: [net-next v3 00/29][pull request] Intel Wired LAN Driver Updates 2014-09-23

[David Miller <davem@davemloft.net>]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Tue, 23 Sep 2014 04:16:28 -0700

> This patch series adds support for the FM10000 Ethernet switch host
> interface.  The Intel FM10000 Ethernet Switch is a 48-port Ethernet switch
> supporting both Ethernet ports and PCI Express host interfaces.  The fm10k
> driver provides support for the host interface portion of the switch, both
> PF and VF.
> 
> As the host interfaces are directly connected to the switch this results in
> some significant differences versus a standard network driver.  For example
> there is no PHY or MII on the device.  Since packets are delivered directly
> from the switch to the host interface these are unnecessary.  Otherwise most
> of the functionality is very similar to our other network drivers such as
> ixgbe or igb.  For example we support all the standard network offloads,
> jumbo frames, SR-IOV (64 VFS), PTP, and some VXLAN and NVGRE offloads.
> 
> v2: converted dev_consume_skb_any() to dev_kfree_skb_any()
>     fix up PTP code based on feedback from the community
> v3: converted the use of smb_mb__before_clear_bit() to smb_mb__before_atomic()
>     added vmalloc header to patch 15
>     added prefetch header to patch 16
> 
> The following are changes since commit b749fc9bff50013182edf2371d7f6c6796aed808:
>   net: fec: fix code identation
> and are available in the git repository at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Pulled, thanks everyone.