From mboxrd@z Thu Jan 1 00:00:00 1970 From: Willy Tarreau Subject: Re: [PATCH 0/5] e1000e: fix nic not boot after rebooting Date: Mon, 15 Dec 2014 09:48:05 +0100 Message-ID: <20141215084805.GF7349@1wt.eu> References: <1418632754-16698-1-git-send-email-Yanjun.Zhu@windriver.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: netdev@vger.kernel.org, Zhu Yanjun To: Zhu Yanjun , Bruce Allan , Jeff Kirsher Return-path: Received: from 1wt.eu ([62.212.114.60]:2647 "EHLO 1wt.eu" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750836AbaLOIsJ (ORCPT ); Mon, 15 Dec 2014 03:48:09 -0500 Content-Disposition: inline In-Reply-To: <1418632754-16698-1-git-send-email-Yanjun.Zhu@windriver.com> Sender: netdev-owner@vger.kernel.org List-ID: Hello, On Mon, Dec 15, 2014 at 04:39:09PM +0800, Zhu Yanjun wrote: > With kernel 2.6.x, e1000e with 82577/8/9 sometimes will not boot > after rebooting. > > If a kernel 2.6.x board with 82577/8/9 e1000e nic is rebooted for > 100 times, there are 7~8 times that 82577/8/9 e1000e nic will not boot > normally. > > Zhu Yanjun (5): > e1000e: reset MAC-PHY interconnect on 82577/82578 > e1000e: workaround EEPROM configuration change on 82579 on kernel > 2.6.x > e1000e: do not toggle LANPHYPC value bit when PHY reset is blocked > e1000e: update workaround for 82579 intermittently disabled during > S0->Sx > e1000e: cleanup use of check_reset_block function pointer Great, thanks! Jeff/Bruce, do you have any objection against me applying these fixes to 2.6.32 ? Thanks, Willy