From: Olivier Sobrie <olivier@sobrie.be>
To: "Ahmed S. Darwish" <darwish.07@gmail.com>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>,
Wolfgang Grandegger <wg@grandegger.com>,
Marc Kleine-Budde <mkl@pengutronix.de>,
"David S. Miller" <davem@davemloft.net>,
Paul Gortmaker <paul.gortmaker@windriver.com>,
Linux-CAN <linux-can@vger.kernel.org>,
netdev <netdev@vger.kernel.org>,
Greg KH <gregkh@linuxfoundation.org>,
Linux-stable <stable@vger.kernel.org>,
LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 1/4] can: kvaser_usb: Don't free packets when tight on URBs
Date: Sun, 28 Dec 2014 22:52:00 +0100 [thread overview]
Message-ID: <20141228215200.GB2548@thinkoso.home> (raw)
In-Reply-To: <20141224235644.GA3778@vivalin-002>
On Thu, Dec 25, 2014 at 01:56:44AM +0200, Ahmed S. Darwish wrote:
> From: Ahmed S. Darwish <ahmed.darwish@valeo.com>
>
> Flooding the Kvaser CAN to USB dongle with multiple reads and
> writes in high frequency caused seemingly-random panics in the
> kernel.
>
> On further inspection, it seems the driver erroneously freed the
> to-be-transmitted packet upon getting tight on URBs and returning
> NETDEV_TX_BUSY, leading to invalid memory writes and double frees
> at a later point in time.
>
> Note:
>
> Finding no more URBs/transmit-contexts and returning NETDEV_TX_BUSY
> is a driver bug in and out of itself: it means that our start/stop
> queue flow control is broken.
>
> This patch only fixes the (buggy) error handling code; the root
> cause shall be fixed in a later commit.
>
> Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com>
Acked-by: Olivier Sobrie <olivier@sobrie.be>
> ---
> drivers/net/can/usb/kvaser_usb.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> (Marc, Greg, I believe this should also be added to -stable?)
>
> diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c
> index 541fb7a..6479a2b 100644
> --- a/drivers/net/can/usb/kvaser_usb.c
> +++ b/drivers/net/can/usb/kvaser_usb.c
> @@ -1294,12 +1294,14 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb,
> if (!urb) {
> netdev_err(netdev, "No memory left for URBs\n");
> stats->tx_dropped++;
> - goto nourbmem;
> + dev_kfree_skb(skb);
> + return NETDEV_TX_OK;
> }
>
> buf = kmalloc(sizeof(struct kvaser_msg), GFP_ATOMIC);
> if (!buf) {
> stats->tx_dropped++;
> + dev_kfree_skb(skb);
> goto nobufmem;
> }
>
> @@ -1334,6 +1336,9 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb,
> }
> }
>
> + /*
> + * This should never happen; it implies a flow control bug.
> + */
> if (!context) {
> netdev_warn(netdev, "cannot find free context\n");
> ret = NETDEV_TX_BUSY;
> @@ -1364,9 +1369,6 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb,
> if (unlikely(err)) {
> can_free_echo_skb(netdev, context->echo_index);
>
> - skb = NULL; /* set to NULL to avoid double free in
> - * dev_kfree_skb(skb) */
> -
> atomic_dec(&priv->active_tx_urbs);
> usb_unanchor_urb(urb);
>
> @@ -1388,8 +1390,6 @@ releasebuf:
> kfree(buf);
> nobufmem:
> usb_free_urb(urb);
> -nourbmem:
> - dev_kfree_skb(skb);
> return ret;
> }
>
--
Olivier
next prev parent reply other threads:[~2014-12-28 21:52 UTC|newest]
Thread overview: 95+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-23 15:46 [PATCH] can: kvaser_usb: Don't free packets when tight on URBs Ahmed S. Darwish
2014-12-23 15:53 ` [PATCH] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2014-12-24 12:36 ` Olivier Sobrie
2014-12-24 15:04 ` Ahmed S. Darwish
2014-12-28 21:51 ` Olivier Sobrie
2014-12-30 15:33 ` Ahmed S. Darwish
2014-12-31 12:13 ` Olivier Sobrie
2014-12-24 12:31 ` [PATCH] can: kvaser_usb: Don't free packets when tight on URBs Olivier Sobrie
2014-12-24 15:52 ` Ahmed S. Darwish
2014-12-24 23:56 ` [PATCH v2 1/4] " Ahmed S. Darwish
2014-12-24 23:59 ` [PATCH v2 2/4] can: kvaser_usb: Reset all URB tx contexts upon channel close Ahmed S. Darwish
2014-12-25 0:02 ` [PATCH v2 3/4] can: kvaser_usb: Don't send a RESET_CHIP for non-existing channels Ahmed S. Darwish
2014-12-25 0:04 ` [PATCH v2 4/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2014-12-28 21:54 ` [PATCH v2 3/4] can: kvaser_usb: Don't send a RESET_CHIP for non-existing channels Olivier Sobrie
2014-12-25 2:50 ` [PATCH v2 1/4] can: kvaser_usb: Don't free packets when tight on URBs Greg KH
2014-12-25 9:38 ` Ahmed S. Darwish
2014-12-28 21:52 ` Olivier Sobrie [this message]
2015-01-01 21:59 ` [PATCH] " Stephen Hemminger
2015-01-03 14:34 ` Ahmed S. Darwish
2015-01-05 17:49 ` [PATCH v3 1/4] " Ahmed S. Darwish
2015-01-05 17:52 ` [PATCH v3 2/4] can: kvaser_usb: Reset all URB tx contexts upon channel close Ahmed S. Darwish
2015-01-05 17:57 ` [PATCH v3 3/4] can: kvaser_usb: Don't send a RESET_CHIP for non-existing channels Ahmed S. Darwish
2015-01-05 18:31 ` [PATCH v3 4/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2015-01-08 11:53 ` Marc Kleine-Budde
2015-01-08 15:19 ` Ahmed S. Darwish
2015-01-12 11:51 ` Marc Kleine-Budde
2015-01-12 12:26 ` Ahmed S. Darwish
2015-01-12 12:34 ` Marc Kleine-Budde
2015-01-09 3:06 ` Ahmed S. Darwish
2015-01-09 14:05 ` Marc Kleine-Budde
2015-01-08 9:59 ` [PATCH v3 1/4] can: kvaser_usb: Don't free packets when tight on URBs Marc Kleine-Budde
2015-01-11 20:05 ` [PATCH v4 00/04] can: Introduce support for Kvaser USBCAN-II devices Ahmed S. Darwish
2015-01-11 20:11 ` [PATCH v4 01/04] can: kvaser_usb: Don't dereference skb after a netif_rx() devices Ahmed S. Darwish
2015-01-11 20:15 ` [PATCH v4 2/4] can: kvaser_usb: Update error counters before exiting on OOM Ahmed S. Darwish
2015-01-11 20:36 ` [PATCH v4 3/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2015-01-11 20:45 ` [PATCH v4 4/4] can: kvaser_usb: Retry first bulk transfer on -ETIMEDOUT Ahmed S. Darwish
2015-01-11 20:51 ` Marc Kleine-Budde
2015-01-12 10:14 ` Ahmed S. Darwish
2015-01-12 10:25 ` Marc Kleine-Budde
2015-01-12 13:33 ` Olivier Sobrie
2015-01-12 13:50 ` Ahmed S. Darwish
2015-01-12 11:20 ` [PATCH v4 3/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2015-01-12 11:43 ` Marc Kleine-Budde
2015-01-12 12:07 ` Ahmed S. Darwish
2015-01-12 12:36 ` Ahmed S. Darwish
2015-01-12 13:53 ` Olivier Sobrie
2015-01-18 20:12 ` Ahmed S. Darwish
2015-01-18 20:13 ` Marc Kleine-Budde
2015-01-12 11:09 ` [PATCH v4 2/4] can: kvaser_usb: Update error counters before exiting on OOM Marc Kleine-Budde
2015-01-12 20:36 ` Ahmed S. Darwish
2015-01-16 14:39 ` Marc Kleine-Budde
2015-01-11 20:49 ` [PATCH v4 01/04] can: kvaser_usb: Don't dereference skb after a netif_rx() Ahmed S. Darwish
2015-01-12 11:05 ` Marc Kleine-Budde
2015-01-20 21:44 ` [PATCH v5 1/5] can: kvaser_usb: Update net interface state before exiting on OOM Ahmed S. Darwish
2015-01-20 21:45 ` [PATCH v5 2/5] can: kvaser_usb: Consolidate and unify state change handling Ahmed S. Darwish
2015-01-20 21:47 ` [PATCH v5 3/5] can: kvaser_usb: Fix state handling upon BUS_ERROR events Ahmed S. Darwish
2015-01-20 21:48 ` [PATCH v5 4/5] can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT Ahmed S. Darwish
2015-01-20 21:50 ` [PATCH v5 5/5] can: kvaser_usb: Add support for the USBcan-II family Ahmed S. Darwish
2015-01-21 12:24 ` [PATCH v5 4/5] can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT Sergei Shtylyov
2015-01-25 11:59 ` Ahmed S. Darwish
2015-01-21 10:33 ` [PATCH v5 2/5] can: kvaser_usb: Consolidate and unify state change handling Andri Yngvason
2015-01-21 10:44 ` Marc Kleine-Budde
2015-01-21 11:00 ` Andri Yngvason
2015-01-21 11:53 ` Wolfgang Grandegger
2015-01-21 14:43 ` Ahmed S. Darwish
2015-01-21 15:00 ` Andri Yngvason
2015-01-21 15:36 ` Ahmed S. Darwish
2015-01-21 16:13 ` Wolfgang Grandegger
2015-01-23 6:07 ` Ahmed S. Darwish
2015-01-23 10:32 ` Andri Yngvason
2015-01-25 2:43 ` Ahmed S. Darwish
2015-01-26 10:21 ` Andri Yngvason
2015-01-21 16:37 ` Andri Yngvason
2015-01-21 16:20 ` Andri Yngvason
2015-01-21 22:59 ` Marc Kleine-Budde
2015-01-22 10:14 ` Andri Yngvason
2015-01-25 2:49 ` Ahmed S. Darwish
2015-01-25 3:21 ` Ahmed S. Darwish
2015-01-26 5:17 ` [PATCH v6 0/7] can: kvaser_usb: Leaf bugfixes and USBCan-II support Ahmed S. Darwish
2015-01-26 5:20 ` [PATCH v6 1/7] can: kvaser_usb: Do not sleep in atomic context Ahmed S. Darwish
2015-01-26 5:22 ` [PATCH v6 2/7] can: kvaser_usb: Send correct context to URB completion Ahmed S. Darwish
2015-01-26 5:24 ` [PATCH v6 3/7] can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT Ahmed S. Darwish
2015-01-26 5:25 ` [PATCH v6 4/7] can: kvaser_usb: Fix state handling upon BUS_ERROR events Ahmed S. Darwish
2015-01-26 5:27 ` [PATCH v6 5/7] can: kvaser_usb: Update interface state before exiting on OOM Ahmed S. Darwish
2015-01-26 5:29 ` [PATCH v6 6/7] can: kvaser_usb: Consolidate and unify state change handling Ahmed S. Darwish
2015-01-26 5:33 ` [PATCH v6 7/7] can: kvaser_usb: Add support for the USBcan-II family Ahmed S. Darwish
2015-01-26 10:34 ` Andri Yngvason
2015-01-26 10:26 ` [PATCH v6 6/7] can: kvaser_usb: Consolidate and unify state change handling Andri Yngvason
2015-01-26 10:28 ` [PATCH v6 5/7] can: kvaser_usb: Update interface state before exiting on OOM Andri Yngvason
2015-01-26 10:50 ` Marc Kleine-Budde
2015-01-26 10:52 ` Andri Yngvason
2015-01-26 10:53 ` Marc Kleine-Budde
2015-01-26 9:55 ` [PATCH v6 0/7] can: kvaser_usb: Leaf bugfixes and USBCan-II support Marc Kleine-Budde
2015-01-26 10:07 ` Marc Kleine-Budde
2015-01-26 10:56 ` Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141228215200.GB2548@thinkoso.home \
--to=olivier@sobrie.be \
--cc=darwish.07@gmail.com \
--cc=davem@davemloft.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=netdev@vger.kernel.org \
--cc=paul.gortmaker@windriver.com \
--cc=socketcan@hartkopp.net \
--cc=stable@vger.kernel.org \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).