From mboxrd@z Thu Jan 1 00:00:00 1970 From: Shawn Guo Subject: Re: [PATCH net-next v2 1/1] ARM: dts: imx6sx: correct i.MX6sx sdb board enet phy address Date: Tue, 20 Jan 2015 19:15:36 +0800 Message-ID: <20150120111534.GA2766@dragon> References: <1421743697-26918-1-git-send-email-b38611@freescale.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: netdev@vger.kernel.org, s.hauer@pengutronix.de, stefan@agner.ch, linux-arm-kernel@lists.infradead.org To: Fugang Duan , davem@davemloft.net Return-path: Received: from mail-pd0-f180.google.com ([209.85.192.180]:39570 "EHLO mail-pd0-f180.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754029AbbATLQY (ORCPT ); Tue, 20 Jan 2015 06:16:24 -0500 Received: by mail-pd0-f180.google.com with SMTP id ft15so13216215pdb.11 for ; Tue, 20 Jan 2015 03:16:24 -0800 (PST) Content-Disposition: inline In-Reply-To: <1421743697-26918-1-git-send-email-b38611@freescale.com> Sender: netdev-owner@vger.kernel.org List-ID: On Tue, Jan 20, 2015 at 04:48:17PM +0800, Fugang Duan wrote: > The commit (3d125f9c91c5) cause i.MX6SX sdb enet cannot work. The cause is > the commit add mdio node with un-correct phy address. > > The patch just correct i.MX6sx sdb board enet phy address. > > V2: > * As Shawn's suggestion that unit-address should match 'reg' property, so > update ethernet-phy unit-address. > > Acked-by: Stefan Agner > Signed-off-by: Fugang Duan Acked-by: Shawn Guo David, I assume that you will send this fix for 3.19, since commit 3d125f9c91c5 was sent via your tree. Otherwise, let me know and I will manage to send it via arm-soc tree. Shawn > --- > arch/arm/boot/dts/imx6sx-sdb.dts | 8 ++++---- > 1 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts > index 8c1febd..c108bb4 100644 > --- a/arch/arm/boot/dts/imx6sx-sdb.dts > +++ b/arch/arm/boot/dts/imx6sx-sdb.dts > @@ -166,12 +166,12 @@ > #address-cells = <1>; > #size-cells = <0>; > > - ethphy1: ethernet-phy@0 { > - reg = <0>; > + ethphy1: ethernet-phy@1 { > + reg = <1>; > }; > > - ethphy2: ethernet-phy@1 { > - reg = <1>; > + ethphy2: ethernet-phy@2 { > + reg = <2>; > }; > }; > }; > -- > 1.7.8 >