From: Andri Yngvason <andri.yngvason@marel.com>
To: "Ahmed S. Darwish" <darwish.07@gmail.com>,
Olivier Sobrie <olivier@sobrie.be>,
Oliver Hartkopp <socketcan@hartkopp.net>,
"Wolfgang Grandegger" <wg@grandegger.com>,
Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Linux-CAN <linux-can@vger.kernel.org>,
netdev <netdev@vger.kernel.org>,
LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v6 6/7] can: kvaser_usb: Consolidate and unify state change handling
Date: Mon, 26 Jan 2015 10:26:43 +0000 [thread overview]
Message-ID: <20150126102643.17894.20176@shannon> (raw)
In-Reply-To: <20150126052915.GG3014@Darwish.PC>
Quoting Ahmed S. Darwish (2015-01-26 05:29:15)
> From: Ahmed S. Darwish <ahmed.darwish@valeo.com>
>
> Replace most of the can interface's state and error counters
> handling with the new can-dev can_change_state() mechanism.
>
> Suggested-by: Andri Yngvason <andri.yngvason@marel.com>
> Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com>
> ---
> drivers/net/can/usb/kvaser_usb.c | 113 ++++++++++++++++---------------------
> 1 files changed, 49 insertions(+), 64 deletions(-)
>
> diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c
> index f57ce55..ddc2954 100644
> --- a/drivers/net/can/usb/kvaser_usb.c
> +++ b/drivers/net/can/usb/kvaser_usb.c
> @@ -620,39 +620,44 @@ static void kvaser_usb_unlink_tx_urbs(struct kvaser_usb_net_priv *priv)
> }
>
> static void kvaser_usb_rx_error_update_can_state(struct kvaser_usb_net_priv *priv,
> - const struct kvaser_usb_error_summary *es)
> + const struct kvaser_usb_error_summary *es,
> + struct can_frame *cf)
> {
> struct net_device_stats *stats;
> - enum can_state new_state;
> -
> - stats = &priv->netdev->stats;
> - new_state = priv->can.state;
> + enum can_state cur_state, new_state, tx_state, rx_state;
>
> netdev_dbg(priv->netdev, "Error status: 0x%02x\n", es->status);
>
> - if (es->status & (M16C_STATE_BUS_OFF | M16C_STATE_BUS_RESET)) {
> - priv->can.can_stats.bus_off++;
> + stats = &priv->netdev->stats;
> + new_state = cur_state = priv->can.state;
> +
> + if (es->status & (M16C_STATE_BUS_OFF | M16C_STATE_BUS_RESET))
> new_state = CAN_STATE_BUS_OFF;
> - } else if (es->status & M16C_STATE_BUS_PASSIVE) {
> - if (priv->can.state != CAN_STATE_ERROR_PASSIVE)
> - priv->can.can_stats.error_passive++;
> + else if (es->status & M16C_STATE_BUS_PASSIVE)
> new_state = CAN_STATE_ERROR_PASSIVE;
> - } else if (es->status & M16C_STATE_BUS_ERROR) {
> - if ((priv->can.state < CAN_STATE_ERROR_WARNING) &&
> - ((es->txerr >= 96) || (es->rxerr >= 96))) {
> - priv->can.can_stats.error_warning++;
> + else if (es->status & M16C_STATE_BUS_ERROR) {
> + if ((es->txerr >= 256) || (es->rxerr >= 256))
> + new_state = CAN_STATE_BUS_OFF;
> + else if ((es->txerr >= 128) || (es->rxerr >= 128))
> + new_state = CAN_STATE_ERROR_PASSIVE;
> + else if ((es->txerr >= 96) || (es->rxerr >= 96))
> new_state = CAN_STATE_ERROR_WARNING;
> - } else if ((priv->can.state > CAN_STATE_ERROR_ACTIVE) &&
> - ((es->txerr < 96) && (es->rxerr < 96))) {
> + else if (cur_state > CAN_STATE_ERROR_ACTIVE)
> new_state = CAN_STATE_ERROR_ACTIVE;
> - }
> }
>
> if (!es->status)
> new_state = CAN_STATE_ERROR_ACTIVE;
>
> + if (new_state != cur_state) {
> + tx_state = (es->txerr >= es->rxerr) ? new_state : 0;
> + rx_state = (es->txerr <= es->rxerr) ? new_state : 0;
> +
> + can_change_state(priv->netdev, cf, tx_state, rx_state);
> + }
> +
> if (priv->can.restart_ms &&
> - (priv->can.state >= CAN_STATE_BUS_OFF) &&
> + (cur_state >= CAN_STATE_BUS_OFF) &&
> (new_state < CAN_STATE_BUS_OFF)) {
> priv->can.can_stats.restarts++;
> }
> @@ -664,18 +669,17 @@ static void kvaser_usb_rx_error_update_can_state(struct kvaser_usb_net_priv *pri
>
> priv->bec.txerr = es->txerr;
> priv->bec.rxerr = es->rxerr;
> - priv->can.state = new_state;
> }
>
> static void kvaser_usb_rx_error(const struct kvaser_usb *dev,
> const struct kvaser_msg *msg)
> {
> - struct can_frame *cf;
> + struct can_frame *cf, tmp_cf = { .can_id = CAN_ERR_FLAG, .can_dlc = CAN_ERR_DLC };
> struct sk_buff *skb;
> struct net_device_stats *stats;
> struct kvaser_usb_net_priv *priv;
> struct kvaser_usb_error_summary es = { };
> - enum can_state old_state;
> + enum can_state old_state, new_state;
>
> switch (msg->id) {
> case CMD_CAN_ERROR_EVENT:
> @@ -715,59 +719,40 @@ static void kvaser_usb_rx_error(const struct kvaser_usb *dev,
> stats = &priv->netdev->stats;
>
> /* Update all of the can interface's state and error counters before
> - * trying any skb allocation that can actually fail with -ENOMEM.
> + * trying any memory allocation that can actually fail with -ENOMEM.
> + *
> + * We send a temporary stack-allocated error can frame to
> + * can_change_state() for the very same reason.
> + *
> + * TODO: Split can_change_state() responsibility between updating the
> + * can interface's state and counters, and the setting up of can error
> + * frame ID and data to userspace. Remove stack allocation afterwards.
> */
> old_state = priv->can.state;
> - kvaser_usb_rx_error_update_can_state(priv, &es);
> + kvaser_usb_rx_error_update_can_state(priv, &es, &tmp_cf);
> + new_state = priv->can.state;
>
> skb = alloc_can_err_skb(priv->netdev, &cf);
> if (!skb) {
> stats->rx_dropped++;
> return;
> }
> -
> - if (es.status & (M16C_STATE_BUS_OFF | M16C_STATE_BUS_RESET)) {
> - cf->can_id |= CAN_ERR_BUSOFF;
> -
> - if (!priv->can.restart_ms)
> - kvaser_usb_simple_msg_async(priv, CMD_STOP_CHIP);
> - netif_carrier_off(priv->netdev);
> - } else if (es.status & M16C_STATE_BUS_PASSIVE) {
> - if (old_state != CAN_STATE_ERROR_PASSIVE) {
> - cf->can_id |= CAN_ERR_CRTL;
> -
> - if (es.txerr || es.rxerr)
> - cf->data[1] = (es.txerr > es.rxerr)
> - ? CAN_ERR_CRTL_TX_PASSIVE
> - : CAN_ERR_CRTL_RX_PASSIVE;
> - else
> - cf->data[1] = CAN_ERR_CRTL_TX_PASSIVE |
> - CAN_ERR_CRTL_RX_PASSIVE;
> - }
> - } else if (es.status & M16C_STATE_BUS_ERROR) {
> - if ((old_state < CAN_STATE_ERROR_WARNING) &&
> - ((es.txerr >= 96) || (es.rxerr >= 96))) {
> - cf->can_id |= CAN_ERR_CRTL;
> - cf->data[1] = (es.txerr > es.rxerr)
> - ? CAN_ERR_CRTL_TX_WARNING
> - : CAN_ERR_CRTL_RX_WARNING;
> - } else if ((old_state > CAN_STATE_ERROR_ACTIVE) &&
> - ((es.txerr < 96) && (es.rxerr < 96))) {
> - cf->can_id |= CAN_ERR_PROT;
> - cf->data[2] = CAN_ERR_PROT_ACTIVE;
> + memcpy(cf, &tmp_cf, sizeof(*cf));
> +
> + if (new_state != old_state) {
> + if (es.status &
> + (M16C_STATE_BUS_OFF | M16C_STATE_BUS_RESET)) {
> + if (!priv->can.restart_ms)
> + kvaser_usb_simple_msg_async(priv, CMD_STOP_CHIP);
> + netif_carrier_off(priv->netdev);
> }
> - }
> -
> - if (!es.status) {
> - cf->can_id |= CAN_ERR_PROT;
> - cf->data[2] = CAN_ERR_PROT_ACTIVE;
> - }
>
> - if (priv->can.restart_ms &&
> - (old_state >= CAN_STATE_BUS_OFF) &&
> - (priv->can.state < CAN_STATE_BUS_OFF)) {
> - cf->can_id |= CAN_ERR_RESTARTED;
> - netif_carrier_on(priv->netdev);
> + if (priv->can.restart_ms &&
> + (old_state >= CAN_STATE_BUS_OFF) &&
> + (new_state < CAN_STATE_BUS_OFF)) {
> + cf->can_id |= CAN_ERR_RESTARTED;
> + netif_carrier_on(priv->netdev);
> + }
> }
>
> if (es.error_factor) {
> --
> 1.7.7.6
ACK, for real this time. ;)
--
Andri
next prev parent reply other threads:[~2015-01-26 10:26 UTC|newest]
Thread overview: 95+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-23 15:46 [PATCH] can: kvaser_usb: Don't free packets when tight on URBs Ahmed S. Darwish
2014-12-23 15:53 ` [PATCH] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2014-12-24 12:36 ` Olivier Sobrie
2014-12-24 15:04 ` Ahmed S. Darwish
2014-12-28 21:51 ` Olivier Sobrie
2014-12-30 15:33 ` Ahmed S. Darwish
2014-12-31 12:13 ` Olivier Sobrie
2014-12-24 12:31 ` [PATCH] can: kvaser_usb: Don't free packets when tight on URBs Olivier Sobrie
2014-12-24 15:52 ` Ahmed S. Darwish
2014-12-24 23:56 ` [PATCH v2 1/4] " Ahmed S. Darwish
2014-12-24 23:59 ` [PATCH v2 2/4] can: kvaser_usb: Reset all URB tx contexts upon channel close Ahmed S. Darwish
2014-12-25 0:02 ` [PATCH v2 3/4] can: kvaser_usb: Don't send a RESET_CHIP for non-existing channels Ahmed S. Darwish
2014-12-25 0:04 ` [PATCH v2 4/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2014-12-28 21:54 ` [PATCH v2 3/4] can: kvaser_usb: Don't send a RESET_CHIP for non-existing channels Olivier Sobrie
2014-12-25 2:50 ` [PATCH v2 1/4] can: kvaser_usb: Don't free packets when tight on URBs Greg KH
2014-12-25 9:38 ` Ahmed S. Darwish
2014-12-28 21:52 ` Olivier Sobrie
2015-01-01 21:59 ` [PATCH] " Stephen Hemminger
2015-01-03 14:34 ` Ahmed S. Darwish
2015-01-05 17:49 ` [PATCH v3 1/4] " Ahmed S. Darwish
2015-01-05 17:52 ` [PATCH v3 2/4] can: kvaser_usb: Reset all URB tx contexts upon channel close Ahmed S. Darwish
2015-01-05 17:57 ` [PATCH v3 3/4] can: kvaser_usb: Don't send a RESET_CHIP for non-existing channels Ahmed S. Darwish
2015-01-05 18:31 ` [PATCH v3 4/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2015-01-08 11:53 ` Marc Kleine-Budde
2015-01-08 15:19 ` Ahmed S. Darwish
2015-01-12 11:51 ` Marc Kleine-Budde
2015-01-12 12:26 ` Ahmed S. Darwish
2015-01-12 12:34 ` Marc Kleine-Budde
2015-01-09 3:06 ` Ahmed S. Darwish
2015-01-09 14:05 ` Marc Kleine-Budde
2015-01-08 9:59 ` [PATCH v3 1/4] can: kvaser_usb: Don't free packets when tight on URBs Marc Kleine-Budde
2015-01-11 20:05 ` [PATCH v4 00/04] can: Introduce support for Kvaser USBCAN-II devices Ahmed S. Darwish
2015-01-11 20:11 ` [PATCH v4 01/04] can: kvaser_usb: Don't dereference skb after a netif_rx() devices Ahmed S. Darwish
2015-01-11 20:15 ` [PATCH v4 2/4] can: kvaser_usb: Update error counters before exiting on OOM Ahmed S. Darwish
2015-01-11 20:36 ` [PATCH v4 3/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2015-01-11 20:45 ` [PATCH v4 4/4] can: kvaser_usb: Retry first bulk transfer on -ETIMEDOUT Ahmed S. Darwish
2015-01-11 20:51 ` Marc Kleine-Budde
2015-01-12 10:14 ` Ahmed S. Darwish
2015-01-12 10:25 ` Marc Kleine-Budde
2015-01-12 13:33 ` Olivier Sobrie
2015-01-12 13:50 ` Ahmed S. Darwish
2015-01-12 11:20 ` [PATCH v4 3/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2015-01-12 11:43 ` Marc Kleine-Budde
2015-01-12 12:07 ` Ahmed S. Darwish
2015-01-12 12:36 ` Ahmed S. Darwish
2015-01-12 13:53 ` Olivier Sobrie
2015-01-18 20:12 ` Ahmed S. Darwish
2015-01-18 20:13 ` Marc Kleine-Budde
2015-01-12 11:09 ` [PATCH v4 2/4] can: kvaser_usb: Update error counters before exiting on OOM Marc Kleine-Budde
2015-01-12 20:36 ` Ahmed S. Darwish
2015-01-16 14:39 ` Marc Kleine-Budde
2015-01-11 20:49 ` [PATCH v4 01/04] can: kvaser_usb: Don't dereference skb after a netif_rx() Ahmed S. Darwish
2015-01-12 11:05 ` Marc Kleine-Budde
2015-01-20 21:44 ` [PATCH v5 1/5] can: kvaser_usb: Update net interface state before exiting on OOM Ahmed S. Darwish
2015-01-20 21:45 ` [PATCH v5 2/5] can: kvaser_usb: Consolidate and unify state change handling Ahmed S. Darwish
2015-01-20 21:47 ` [PATCH v5 3/5] can: kvaser_usb: Fix state handling upon BUS_ERROR events Ahmed S. Darwish
2015-01-20 21:48 ` [PATCH v5 4/5] can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT Ahmed S. Darwish
2015-01-20 21:50 ` [PATCH v5 5/5] can: kvaser_usb: Add support for the USBcan-II family Ahmed S. Darwish
2015-01-21 12:24 ` [PATCH v5 4/5] can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT Sergei Shtylyov
2015-01-25 11:59 ` Ahmed S. Darwish
2015-01-21 10:33 ` [PATCH v5 2/5] can: kvaser_usb: Consolidate and unify state change handling Andri Yngvason
2015-01-21 10:44 ` Marc Kleine-Budde
2015-01-21 11:00 ` Andri Yngvason
2015-01-21 11:53 ` Wolfgang Grandegger
2015-01-21 14:43 ` Ahmed S. Darwish
2015-01-21 15:00 ` Andri Yngvason
2015-01-21 15:36 ` Ahmed S. Darwish
2015-01-21 16:13 ` Wolfgang Grandegger
2015-01-23 6:07 ` Ahmed S. Darwish
2015-01-23 10:32 ` Andri Yngvason
2015-01-25 2:43 ` Ahmed S. Darwish
2015-01-26 10:21 ` Andri Yngvason
2015-01-21 16:37 ` Andri Yngvason
2015-01-21 16:20 ` Andri Yngvason
2015-01-21 22:59 ` Marc Kleine-Budde
2015-01-22 10:14 ` Andri Yngvason
2015-01-25 2:49 ` Ahmed S. Darwish
2015-01-25 3:21 ` Ahmed S. Darwish
2015-01-26 5:17 ` [PATCH v6 0/7] can: kvaser_usb: Leaf bugfixes and USBCan-II support Ahmed S. Darwish
2015-01-26 5:20 ` [PATCH v6 1/7] can: kvaser_usb: Do not sleep in atomic context Ahmed S. Darwish
2015-01-26 5:22 ` [PATCH v6 2/7] can: kvaser_usb: Send correct context to URB completion Ahmed S. Darwish
2015-01-26 5:24 ` [PATCH v6 3/7] can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT Ahmed S. Darwish
2015-01-26 5:25 ` [PATCH v6 4/7] can: kvaser_usb: Fix state handling upon BUS_ERROR events Ahmed S. Darwish
2015-01-26 5:27 ` [PATCH v6 5/7] can: kvaser_usb: Update interface state before exiting on OOM Ahmed S. Darwish
2015-01-26 5:29 ` [PATCH v6 6/7] can: kvaser_usb: Consolidate and unify state change handling Ahmed S. Darwish
2015-01-26 5:33 ` [PATCH v6 7/7] can: kvaser_usb: Add support for the USBcan-II family Ahmed S. Darwish
2015-01-26 10:34 ` Andri Yngvason
2015-01-26 10:26 ` Andri Yngvason [this message]
2015-01-26 10:28 ` [PATCH v6 5/7] can: kvaser_usb: Update interface state before exiting on OOM Andri Yngvason
2015-01-26 10:50 ` Marc Kleine-Budde
2015-01-26 10:52 ` Andri Yngvason
2015-01-26 10:53 ` Marc Kleine-Budde
2015-01-26 9:55 ` [PATCH v6 0/7] can: kvaser_usb: Leaf bugfixes and USBCan-II support Marc Kleine-Budde
2015-01-26 10:07 ` Marc Kleine-Budde
2015-01-26 10:56 ` Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150126102643.17894.20176@shannon \
--to=andri.yngvason@marel.com \
--cc=darwish.07@gmail.com \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=netdev@vger.kernel.org \
--cc=olivier@sobrie.be \
--cc=socketcan@hartkopp.net \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).