From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Lennart Sorensen" Subject: [PATCH V2] Fix misspelling of defrag in ip-l2tp.8 Date: Wed, 25 Feb 2015 13:59:42 -0500 Message-ID: <20150225185942.GA22050@csclub.uwaterloo.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: netdev@vger.kernel.org, James Chapman To: Len Sorensen Return-path: Received: from mail.csclub.uwaterloo.ca ([129.97.134.52]:53700 "EHLO mail.csclub.uwaterloo.ca" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751479AbbBYS7n (ORCPT ); Wed, 25 Feb 2015 13:59:43 -0500 Content-Disposition: inline Sender: netdev-owner@vger.kernel.org List-ID: Somehow defrag was spelled degrag everywhere it occoured in the ip-l2tp man page. nf_degrag_ipv4 seemed like an odd name for the module and couldn't be located, so better fix the man page. Signed-off-by: Len Sorensen --- man/man8/ip-l2tp.8 | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/man/man8/ip-l2tp.8 b/man/man8/ip-l2tp.8 index 2efda9f..1738035 100644 --- a/man/man8/ip-l2tp.8 +++ b/man/man8/ip-l2tp.8 @@ -356,16 +356,16 @@ the recipient expects to receive ethernet frames exactly as transmitted. In such cases, it is important that frames leaving the tunnel are reassembled back into a single frame before being forwarded on. To do so, enable netfilter connection tracking -(conntrack) or manually load the Linux netfilter degrag modules at +(conntrack) or manually load the Linux netfilter defrag modules at each tunnel endpoint. .PP .nf -site-A:# modprobe nf_degrag_ipv4 +site-A:# modprobe nf_defrag_ipv4 -site-B:# modprobe nf_degrag_ipv4 +site-B:# modprobe nf_defrag_ipv4 .fi .PP -If L2TP is being used over IPv6, use the IPv6 degrag module. +If L2TP is being used over IPv6, use the IPv6 defrag module. .SH INTEROPERABILITY .PP Unmanaged (static) L2TPv3 tunnels are supported by some network -- 1.7.10.4