From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jesper Dangaard Brouer Subject: [net-next PATCH 01/10] pktgen: remove obsolete "max_before_softirq" from pktgen doc Date: Tue, 19 May 2015 23:35:18 +0200 Message-ID: <20150519213518.9070.37250.stgit@ivy> References: <20150519213326.9070.18264.stgit@ivy> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Cc: Jesper Dangaard Brouer , Daniel Borkmann , Alexei Starovoitov , Robert Olsson , Ben Greear To: netdev@vger.kernel.org Return-path: Received: from mx1.redhat.com ([209.132.183.28]:59780 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751097AbbESVfX (ORCPT ); Tue, 19 May 2015 17:35:23 -0400 In-Reply-To: <20150519213326.9070.18264.stgit@ivy> Sender: netdev-owner@vger.kernel.org List-ID: And cleanup some whitespaces in pktgen.txt. Signed-off-by: Jesper Dangaard Brouer --- Documentation/networking/pktgen.txt | 18 ++++++++---------- 1 files changed, 8 insertions(+), 10 deletions(-) diff --git a/Documentation/networking/pktgen.txt b/Documentation/networking/pktgen.txt index 747facc..62f5ebb 100644 --- a/Documentation/networking/pktgen.txt +++ b/Documentation/networking/pktgen.txt @@ -1,6 +1,6 @@ - HOWTO for the linux packet generator + HOWTO for the linux packet generator ------------------------------------ Enable CONFIG_NET_PKTGEN to compile and build pktgen either in-kernel @@ -52,11 +52,10 @@ For ixgbe use e.g. "30" resulting in approx 33K interrupts/sec (1/30*10^6): Viewing threads =============== -/proc/net/pktgen/kpktgend_0 -Name: kpktgend_0 max_before_softirq: 10000 -Running: -Stopped: eth1 -Result: OK: max_before_softirq=10000 +/proc/net/pktgen/kpktgend_0 +Running: +Stopped: eth1 +Result: OK: add_device=eth1 Most important are the devices assigned to the thread. Note that a device can only belong to one thread. @@ -69,7 +68,7 @@ The Params section holds configured information. The Current section holds running statistics. The Result is printed after a run or after interruption. Example: -/proc/net/pktgen/eth1 +/proc/net/pktgen/eth1 Params: count 10000000 min_pkt_size: 60 max_pkt_size: 60 frags: 0 delay: 0 clone_skb: 1000000 ifname: eth1 @@ -126,7 +125,7 @@ Examples: To select queue 1 of a given device, use queue_map_min=1 and queue_map_max=1 - pgset "src_mac_count 1" Sets the number of MACs we'll range through. + pgset "src_mac_count 1" Sets the number of MACs we'll range through. The 'minimum' MAC is what you set with srcmac. pgset "dst_mac_count 1" Sets the number of MACs we'll range through. @@ -247,7 +246,6 @@ stop add_device rem_device_all -max_before_softirq ** Device commands: @@ -262,7 +260,7 @@ delay src_mac_count dst_mac_count -pkt_size +pkt_size min_pkt_size max_pkt_size