From: Ralf Baechle <ralf@linux-mips.org>
To: linux-hams@vger.kernel.org, netdev@vger.kernel.org,
"Eric W. Biederman" <ebiederm@xmission.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>,
Richard Stearn <richard@rns-stearn.demon.co.uk>,
f6bvp <f6bvp@free.fr>
Subject: Bpqether broken in 4.1
Date: Thu, 2 Jul 2015 20:38:36 +0200 [thread overview]
Message-ID: <20150702183836.GA20390@linux-mips.org> (raw)
Eric's Commit 1d5da757da860a6916adbf68b09e868062b4b3b8 (ax25: Stop using
magic neighbour cache operations.) breaks IP traffic over the AX.25 bpqether
driver.
Here's how to reproduce the issue if you don't have an AX.25 setup. The
arp command is there to fudge things if you don't have a peer that would
answer ARP requests.
# modprobe bpqether
# ifconfig bpq0 hw ax25 abcdef-7 172.20.4.1/24
# arp -H ax25 -s 172.20.4.2 uvwxyz-9
# ping 172.20.4.2
Result in one "Dead loop on virtual device bpq0, fix it urgently!" message
per ping packet. With the following little debug patch
diff --git a/net/core/dev.c b/net/core/dev.c
index aa82f9a..5fef868 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -3011,6 +3011,7 @@ static int __dev_queue_xmit(struct sk_buff *skb, void *accel_priv)
recursion_alert:
net_crit_ratelimited("Dead loop on virtual device %s, fix it urgently!\n",
dev->name);
+ WARN_ON(1);
}
}
I get the following backtrace:
[ 33.149171] Dead loop on virtual device bpq0, fix it urgently!
[ 33.149718] ------------[ cut here ]------------
[ 33.149754] WARNING: CPU: 0 PID: 0 at net/core/dev.c:3014 __dev_queue_xmit+0x3f6/0x530()
[ 33.149769] Modules linked in:
[ 33.149789] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.1.0-00010-g21c6d95-dirty #18
[ 33.149799] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014
[ 33.149810] 0000000000000000 de52945c8e778a65 ffff88007fc039a8 ffffffff816d2165
[ 33.149823] 0000000000000000 0000000000000000 ffff88007fc039e8 ffffffff810634aa
[ 33.149833] ffff88007fc039c8 0000000000000000 ffff880078f90000 ffff880078f90000
[ 33.149844] Call Trace:
[ 33.149885] <IRQ> [<ffffffff816d2165>] dump_stack+0x45/0x57
[ 33.149927] [<ffffffff810634aa>] warn_slowpath_common+0x8a/0xc0
[ 33.149939] [<ffffffff810635da>] warn_slowpath_null+0x1a/0x20
[ 33.149949] [<ffffffff815c7c06>] __dev_queue_xmit+0x3f6/0x530
[ 33.149967] [<ffffffff8108cbed>] ? ttwu_do_wakeup+0x1d/0xe0
[ 33.149978] [<ffffffff815c7d53>] dev_queue_xmit_sk+0x13/0x20
[ 33.149994] [<ffffffff816b9951>] ax25_queue_xmit+0x61/0x70
[ 33.150005] [<ffffffff816b9476>] ax25_ip_xmit+0xd6/0x2d0
[ 33.150022] [<ffffffff8108fb47>] ? wake_up_process+0x27/0x50
[ 33.150050] [<ffffffff814dda35>] bpq_xmit+0x1d5/0x200
[ 33.150061] [<ffffffff815c7694>] dev_hard_start_xmit+0x264/0x3e0
[ 33.150073] [<ffffffff815c7ccd>] __dev_queue_xmit+0x4bd/0x530
[ 33.150083] [<ffffffff815c7d53>] dev_queue_xmit_sk+0x13/0x20
[ 33.150099] [<ffffffff815d03c2>] neigh_connected_output+0xc2/0x110
[ 33.150110] [<ffffffff815d3483>] neigh_update+0x333/0x770
[ 33.150117] [<ffffffff8162d2a7>] arp_process.isra.15+0x2f7/0x690
[ 33.150117] [<ffffffff8162d736>] arp_rcv+0xe6/0x130
[ 33.150117] [<ffffffff815c5543>] __netif_receive_skb_core+0x693/0x830
[ 33.150117] [<ffffffff815c56f8>] __netif_receive_skb+0x18/0x60
[ 33.150117] [<ffffffff815c6532>] process_backlog+0xb2/0x150
[ 33.150117] [<ffffffff815c5cd2>] net_rx_action+0x212/0x340
[ 33.150117] [<ffffffff81067aeb>] __do_softirq+0x10b/0x2d0
[ 33.150117] [<ffffffff81067f15>] irq_exit+0x145/0x150
[ 33.150117] [<ffffffff816da8a8>] do_IRQ+0x58/0xf0
[ 33.150117] [<ffffffff816d896e>] common_interrupt+0x6e/0x6e
[ 33.150117] <EOI> [<ffffffff8104b236>] ? native_safe_halt+0x6/0x10
[ 33.150117] [<ffffffff810c4d43>] ? rcu_eqs_enter+0xa3/0xb0
[ 33.150117] [<ffffffff8100ddbe>] default_idle+0x1e/0xc0
[ 33.150117] [<ffffffff8100e81f>] arch_cpu_idle+0xf/0x20
[ 33.150117] [<ffffffff810a6f57>] cpu_startup_entry+0x377/0x3f0
[ 33.150117] [<ffffffff816c989c>] rest_init+0x7c/0x80
[ 33.150117] [<ffffffff81d32fe4>] start_kernel+0x484/0x4a5
[ 33.150117] [<ffffffff81d32120>] ? early_idt_handler_array+0x120/0x120
[ 33.150117] [<ffffffff81d32315>] x86_64_start_reservations+0x2a/0x2c
[ 33.150117] [<ffffffff81d3245c>] x86_64_start_kernel+0x145/0x168
[ 33.150117] ---[ end trace ff4df9d904cced48 ]---
Ralf
next reply other threads:[~2015-07-02 18:38 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-02 18:38 Ralf Baechle [this message]
2015-07-02 21:03 ` Bpqether broken in 4.1 Eric W. Biederman
2015-07-02 21:55 ` Ralf Baechle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150702183836.GA20390@linux-mips.org \
--to=ralf@linux-mips.org \
--cc=ebiederm@xmission.com \
--cc=f6bvp@free.fr \
--cc=linux-hams@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=richard@rns-stearn.demon.co.uk \
--cc=swhiteho@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).