From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
To: netdev@vger.kernel.org, "David S. Miller" <davem@davemloft.net>
Cc: Mahesh Bandewar <maheshb@google.com>, Jiri Benc <jbenc@redhat.com>
Subject: [PATCH v2 5/5] ipvlan: set dev_id for l2 ports to generate unique IPv6 addresses
Date: Fri, 03 Jul 2015 15:58:41 +0300 [thread overview]
Message-ID: <20150703125841.24121.73888.stgit@buzz> (raw)
In-Reply-To: <20150703125132.24121.50592.stgit@buzz>
All ipvlan ports use one MAC address, this way ipv6 RA tries to assign
one ipv6 address to all of them. This patch assigns unique dev_id to each
ipvlan port. This field is used instead of common FF-FE in Modified EUI-64.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
---
Documentation/networking/ipvlan.txt | 11 ++++++++++-
drivers/net/ipvlan/ipvlan.h | 1 +
drivers/net/ipvlan/ipvlan_main.c | 19 +++++++++++++++++++
3 files changed, 30 insertions(+), 1 deletion(-)
diff --git a/Documentation/networking/ipvlan.txt b/Documentation/networking/ipvlan.txt
index cf996394e466..d1123de81469 100644
--- a/Documentation/networking/ipvlan.txt
+++ b/Documentation/networking/ipvlan.txt
@@ -24,7 +24,7 @@ using IProute2/ip utility.
ip link add link <master-dev> <slave-dev> type ipvlan mode { l2 | L3 }
- e.g. ip link add link ipvl0 eth0 type ipvlan mode l2
+ e.g. ip link add link eth0 ipvl0 type ipvlan mode l2
4. Operating modes:
@@ -41,6 +41,15 @@ slave device and packets are switched and queued to the master device to send
out. In this mode the slaves will RX/TX multicast and broadcast (if applicable)
as well.
+ In L2 mode slave devices receive Router Advertisements from the network
+and perform autoconfiguration as well as master device. Each port has unique
+16-bit device id which is used for filling octets 4-5 of Modified EUI-64.
+That gives 65533 addresses (FF-FE used by master, FF-FF/00-00 reserved/not used).
+
+ Also lower half of IPv6 address could be set as interface token:
+
+ ip token set ::aaaa:bbbb:cccc:dddd dev ipvl0
+
4.2 L3 mode:
In this mode TX processing upto L3 happens on the stack instance attached
to the slave device and packets are switched to the stack instance of the
diff --git a/drivers/net/ipvlan/ipvlan.h b/drivers/net/ipvlan/ipvlan.h
index a23069aec4d9..0d1f5e8ed75f 100644
--- a/drivers/net/ipvlan/ipvlan.h
+++ b/drivers/net/ipvlan/ipvlan.h
@@ -98,6 +98,7 @@ struct ipvl_port {
int count;
u16 mode;
spinlock_t addr_lock;
+ struct ida ida;
};
static inline struct ipvl_port *ipvlan_port_get_rcu(const struct net_device *d)
diff --git a/drivers/net/ipvlan/ipvlan_main.c b/drivers/net/ipvlan/ipvlan_main.c
index 83a936f76248..d465b2c287cb 100644
--- a/drivers/net/ipvlan/ipvlan_main.c
+++ b/drivers/net/ipvlan/ipvlan_main.c
@@ -53,6 +53,7 @@ static int ipvlan_port_create(struct net_device *dev)
INIT_LIST_HEAD(&port->ipvlans);
for (idx = 0; idx < IPVLAN_HASH_SIZE; idx++)
INIT_HLIST_HEAD(&port->hlhead[idx]);
+ ida_init(&port->ida);
skb_queue_head_init(&port->backlog);
INIT_WORK(&port->wq, ipvlan_process_multicast);
@@ -78,6 +79,7 @@ static void ipvlan_port_destroy(struct net_device *dev)
netdev_rx_handler_unregister(dev);
cancel_work_sync(&port->wq);
__skb_queue_purge(&port->backlog);
+ ida_destroy(&port->ida);
kfree_rcu(port, rcu);
}
@@ -481,6 +483,18 @@ static int ipvlan_link_new(struct net *src_net, struct net_device *dev,
*/
memcpy(dev->dev_addr, phy_dev->dev_addr, ETH_ALEN);
+ if (port->mode == IPVLAN_MODE_L2) {
+ /*
+ * IPv6 addrconf uses it to produce unique addresses,
+ * see function addrconf_ifid_eui48.
+ */
+ err = ida_simple_get(&port->ida, 1, 0xFFFE, GFP_KERNEL);
+ if (err > 0)
+ dev->dev_id = err;
+ else if (err != -ENOSPC)
+ goto ipvlan_destroy_port;
+ }
+
dev->priv_flags |= IFF_IPVLAN_SLAVE;
port->count += 1;
@@ -517,6 +531,11 @@ static void ipvlan_link_delete(struct net_device *dev, struct list_head *head)
}
ipvlan_addr_unlock_bh(ipvlan);
+ if (dev->dev_id) {
+ ida_simple_remove(&ipvlan->port->ida, dev->dev_id);
+ dev->dev_id = 0;
+ }
+
list_del_rcu(&ipvlan->pnode);
unregister_netdevice_queue(dev, head);
netdev_upper_dev_unlink(ipvlan->phy_dev, dev);
prev parent reply other threads:[~2015-07-03 12:58 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-03 12:58 [PATCH v2 0/5] ipvlan: fix ipv6 autoconfiguration Konstantin Khlebnikov
2015-07-03 12:58 ` [PATCH v2 1/5] ipvlan: remove counters of ipv4 and ipv6 addresses Konstantin Khlebnikov
2015-07-08 3:59 ` Mahesh Bandewar
2015-07-03 12:58 ` [PATCH v2 2/5] ipvlan: plug memory leak in ipvlan_link_delete Konstantin Khlebnikov
2015-07-03 12:58 ` [PATCH v2 3/5] ipvlan: unhash addresses without synchronize_rcu Konstantin Khlebnikov
2015-07-03 12:58 ` [PATCH v2 4/5] ipvlan: protect addresses with internal spinlock Konstantin Khlebnikov
2015-07-08 4:05 ` Mahesh Bandewar
2015-07-10 12:08 ` Konstantin Khlebnikov
2015-07-03 12:58 ` Konstantin Khlebnikov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150703125841.24121.73888.stgit@buzz \
--to=khlebnikov@yandex-team.ru \
--cc=davem@davemloft.net \
--cc=jbenc@redhat.com \
--cc=maheshb@google.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).