Re: Broadcom BCM54610 Linux support

[Markus Pargmann <mpa@pengutronix.de>]

[-- Attachment #1: Type: text/plain, Size: 1261 bytes --]

Hi,

On Tue, Jul 07, 2015 at 10:34:56AM -0700, Florian Fainelli wrote:
> (adding Michael)
> 
> On 07/07/15 03:58, Markus Pargmann wrote:
> > Hi,
> > 
> > I found the phy driver which supports broadcom BCM5461. But I am not
> > sure if this driver does support BCM54610 in fiber mode as well? Or if
> > there are any open datasheets which could be used to write a mainline
> > driver for it. I would appretiate any information about this.
> 
> There are not publicly available datasheets as far as I can tell, the
> current driver does not support anything but copper modes.
> 
> If you have reference code from somewhere else (e.g: bootloader or a
> Broadcom SDK), I would be inclined to port it over the Linux PHY driver.

Thanks. Unfortunately I don't have any reference code that I could use
to support BCM54610 in fiber mode. So it's probably better to use a
different PHY with more public information.

Thanks,

Markus

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]