From: Andrew Lunn <andrew@lunn.ch>
To: Lucas Stach <l.stach@pengutronix.de>, David Miller <davem@davemloft.net>
Cc: "David S. Miller" <davem@davemloft.net>,
Duan Andy <fugang.duan@freescale.com>,
Frank Li <Frank.Li@freescale.com>,
netdev@vger.kernel.org, kernel@pengutronix.de,
patchwork-lst@pengutronix.de
Subject: Re: [PATCH] net: fec: fix runtime PM when probing MII bus
Date: Tue, 21 Jul 2015 01:52:24 +0200 [thread overview]
Message-ID: <20150720235224.GA22909@lunn.ch> (raw)
In-Reply-To: <1437400094-11453-1-git-send-email-l.stach@pengutronix.de>
On Mon, Jul 20, 2015 at 03:48:14PM +0200, Lucas Stach wrote:
> In the case where there is no "mdio" bus specified in the devicetree a plain
> mdiobus_register() will be called, which tries to probe the connected PHY
> by doing mdio_read() on the bus.
> Since 6c3e921b18ed (net: fec: Ensure clocks are enabled while using mdio bus)
> this needs runtime PM to be available, but as RPM is only later set up in the
> FEC probe function those calls will fail, which in turn prevents the FEC
> driver to be registered successfully.
>
> Fix this by moving the RPM setup calls before the MII bus probing.
>
> Also move autosuspend init calls before runtime_pm_enable() so that the RPM
> callbacks aren't invoked several times during the probe function.
>
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> ---
> The offending commit got in with v4.2-rc3, so this should be applied as
> a fix for 4.2.
Hi David
You emailed saying you had reverted 6c3e921b18ed, but it is still in
net-next/master. If you are not going to revert it, please apply this
patch. I've tested it on my platform as well and it works for me.
If you still plan to revert 6c3e921b18ed, then i will squash this
patch into mine and resubmit.
Thanks
Andrew
> ---
> drivers/net/ethernet/freescale/fec_main.c | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
> index 42e20e5385ac..349365d85b92 100644
> --- a/drivers/net/ethernet/freescale/fec_main.c
> +++ b/drivers/net/ethernet/freescale/fec_main.c
> @@ -3431,6 +3431,11 @@ fec_probe(struct platform_device *pdev)
> fep->reg_phy = NULL;
> }
>
> + pm_runtime_set_autosuspend_delay(&pdev->dev, FEC_MDIO_PM_TIMEOUT);
> + pm_runtime_use_autosuspend(&pdev->dev);
> + pm_runtime_set_active(&pdev->dev);
> + pm_runtime_enable(&pdev->dev);
> +
> fec_reset_phy(pdev);
>
> if (fep->bufdesc_ex)
> @@ -3465,8 +3470,6 @@ fec_probe(struct platform_device *pdev)
> netif_carrier_off(ndev);
> fec_enet_clk_enable(ndev, false);
> pinctrl_pm_select_sleep_state(&pdev->dev);
> - pm_runtime_set_active(&pdev->dev);
> - pm_runtime_enable(&pdev->dev);
>
> ret = register_netdev(ndev);
> if (ret)
> @@ -3481,8 +3484,6 @@ fec_probe(struct platform_device *pdev)
> fep->rx_copybreak = COPYBREAK_DEFAULT;
> INIT_WORK(&fep->tx_timeout_work, fec_enet_timeout_work);
>
> - pm_runtime_set_autosuspend_delay(&pdev->dev, FEC_MDIO_PM_TIMEOUT);
> - pm_runtime_use_autosuspend(&pdev->dev);
> pm_runtime_mark_last_busy(&pdev->dev);
> pm_runtime_put_autosuspend(&pdev->dev);
>
> --
> 2.1.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-07-20 23:59 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-20 13:48 [PATCH] net: fec: fix runtime PM when probing MII bus Lucas Stach
2015-07-20 13:59 ` Andrew Lunn
2015-07-20 14:12 ` Lucas Stach
2015-07-20 23:52 ` Andrew Lunn [this message]
2015-07-21 0:14 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150720235224.GA22909@lunn.ch \
--to=andrew@lunn.ch \
--cc=Frank.Li@freescale.com \
--cc=davem@davemloft.net \
--cc=fugang.duan@freescale.com \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=netdev@vger.kernel.org \
--cc=patchwork-lst@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).