netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: David Vrabel <david.vrabel@citrix.com>,
	Ian Campbell <ian.campbell@citrix.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	xen-devel@lists.xen.org, stable@vger.kernel.org
Subject: Re: [Xen-devel] [PATCH v2] xen-apic: Enable on domU as well
Date: Fri, 7 Aug 2015 10:23:29 -0400	[thread overview]
Message-ID: <20150807142329.GC29527@l.oracle.com> (raw)
In-Reply-To: <1438879025-27362-1-git-send-email-Jason@zx2c4.com>

On Thu, Aug 06, 2015 at 06:37:05PM +0200, Jason A. Donenfeld wrote:
> It turns out that domU also requires the Xen APIC driver. Otherwise we
> get stuck in busy loops that never exit, such as in this stack trace:
> 
> (gdb) target remote localhost:9999
> Remote debugging using localhost:9999
> __xapic_wait_icr_idle () at ./arch/x86/include/asm/ipi.h:56
> 56              while (native_apic_mem_read(APIC_ICR) & APIC_ICR_BUSY)
> (gdb) bt
>  #0  __xapic_wait_icr_idle () at ./arch/x86/include/asm/ipi.h:56
>  #1  __default_send_IPI_shortcut (shortcut=<optimized out>,
> dest=<optimized out>, vector=<optimized out>) at
> ./arch/x86/include/asm/ipi.h:75
>  #2  apic_send_IPI_self (vector=246) at arch/x86/kernel/apic/probe_64.c:54
>  #3  0xffffffff81011336 in arch_irq_work_raise () at
> arch/x86/kernel/irq_work.c:47
>  #4  0xffffffff8114990c in irq_work_queue (work=0xffff88000fc0e400) at
> kernel/irq_work.c:100
>  #5  0xffffffff8110c29d in wake_up_klogd () at kernel/printk/printk.c:2633
>  #6  0xffffffff8110ca60 in vprintk_emit (facility=0, level=<optimized
> out>, dict=0x0 <irq_stack_union>, dictlen=<optimized out>,
> fmt=<optimized out>, args=<optimized out>)
>     at kernel/printk/printk.c:1778
>  #7  0xffffffff816010c8 in printk (fmt=<optimized out>) at
> kernel/printk/printk.c:1868
>  #8  0xffffffffc00013ea in ?? ()
>  #9  0x0000000000000000 in ?? ()
> 
> Mailing-list-thread: https://lkml.org/lkml/2015/8/4/755
> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
> Cc: David Vrabel <david.vrabel@citrix.com>
> Cc: Ian Campbell <ian.campbell@citrix.com>
> Cc: <stable@vger.kernel.org>

While this patch is OK for the trees that implement the PV APIC
driver it won't apply to older ones (and it does not need to).

In the older ones this was working with f447d56d36af18c5104ff29dcb1327c0c0ac3634
"xen: implement apic ipi interface", which should have worked for
your case.

And would have made the arch_irq_work_raise and such use the 
Xen code paths:
 952                                                                                 
 953 #ifdef CONFIG_SMP                                                               
 954     apic->send_IPI_allbutself = xen_send_IPI_allbutself;                        
 955     apic->send_IPI_mask_allbutself = xen_send_IPI_mask_allbutself;              
 956     apic->send_IPI_mask = xen_send_IPI_mask;                                    
 957     apic->send_IPI_all = xen_send_IPI_all;                                      
 958     apic->send_IPI_self = xen_send_IPI_self;                                    
 959 #endif        

Anyhow, your patch seems to fix a regression my patch 
feb44f1f7a4ac299d1ab1c3606860e70b9b89d69
"x86/xen: Provide a "Xen PV" APIC driver to support >255 VCPUs"
introduced.

I would to the stable.vger.kernel.org:
# apply only to v4.1

As the earlier ones will work fine.

Thank you!

Oh, and Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>


> ---
>  arch/x86/xen/Makefile  |  4 ++--
>  arch/x86/xen/xen-ops.h | 11 ++++-------
>  2 files changed, 6 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile
> index 7322755..4b6e29a 100644
> --- a/arch/x86/xen/Makefile
> +++ b/arch/x86/xen/Makefile
> @@ -13,13 +13,13 @@ CFLAGS_mmu.o			:= $(nostackp)
>  obj-y		:= enlighten.o setup.o multicalls.o mmu.o irq.o \
>  			time.o xen-asm.o xen-asm_$(BITS).o \
>  			grant-table.o suspend.o platform-pci-unplug.o \
> -			p2m.o
> +			p2m.o apic.o
>  
>  obj-$(CONFIG_EVENT_TRACING) += trace.o
>  
>  obj-$(CONFIG_SMP)		+= smp.o
>  obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= spinlock.o
>  obj-$(CONFIG_XEN_DEBUG_FS)	+= debugfs.o
> -obj-$(CONFIG_XEN_DOM0)		+= apic.o vga.o
> +obj-$(CONFIG_XEN_DOM0)		+= vga.o
>  obj-$(CONFIG_SWIOTLB_XEN)	+= pci-swiotlb-xen.o
>  obj-$(CONFIG_XEN_EFI)		+= efi.o
> diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
> index c20fe29..cd248ff 100644
> --- a/arch/x86/xen/xen-ops.h
> +++ b/arch/x86/xen/xen-ops.h
> @@ -98,20 +98,17 @@ static inline void xen_uninit_lock_cpu(int cpu)
>  #endif
>  
>  struct dom0_vga_console_info;
> -
>  #ifdef CONFIG_XEN_DOM0
>  void __init xen_init_vga(const struct dom0_vga_console_info *, size_t size);
> -void __init xen_init_apic(void);
>  #else
> -static inline void __init xen_init_vga(const struct dom0_vga_console_info *info,
> -				       size_t size)
> -{
> -}
> -static inline void __init xen_init_apic(void)
> +void __init xen_init_vga(const struct dom0_vga_console_info *info,
> +			size_t size);
>  {
>  }
>  #endif
>  
> +void __init xen_init_apic(void);
> +
>  #ifdef CONFIG_XEN_EFI
>  extern void xen_efi_init(void);
>  #else
> -- 
> 2.5.0
> 
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xen.org
> http://lists.xen.org/xen-devel

  reply	other threads:[~2015-08-07 14:23 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-04 16:41 printk from softirq on xen: hard lockup Jason A. Donenfeld
2015-08-04 17:12 ` [Xen-devel] " David Vrabel
2015-08-04 17:45   ` Jason A. Donenfeld
2015-08-04 23:01   ` [Xen-devel] " Jason A. Donenfeld
2015-08-06 10:02     ` David Vrabel
2015-08-06 15:58       ` Jason A. Donenfeld
2015-08-06 16:10         ` David Vrabel
2015-08-06 16:21           ` Jason A. Donenfeld
2015-08-06 16:29             ` [PATCH] xen-apic: Enable on domU as well Jason A. Donenfeld
2015-08-06 16:37               ` [PATCH v2] " Jason A. Donenfeld
2015-08-07 14:23                 ` Konrad Rzeszutek Wilk [this message]
2015-08-07 14:37                   ` [Xen-devel] " Jason A. Donenfeld
2015-08-10 13:40                 ` [PATCH v3] " Jason A. Donenfeld
2015-08-10 13:41                   ` David Vrabel
2015-08-10 13:44                     ` Jason A. Donenfeld
2015-08-11 10:46                   ` [Xen-devel] " David Vrabel
2015-08-05 16:37   ` [Xen-devel] printk from softirq on xen: hard lockup Jason A. Donenfeld
2015-08-06  8:22   ` Ian Campbell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150807142329.GC29527@l.oracle.com \
    --to=konrad.wilk@oracle.com \
    --cc=Jason@zx2c4.com \
    --cc=david.vrabel@citrix.com \
    --cc=ian.campbell@citrix.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).