From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Hemminger Subject: Re: [PATCH iproute2] add support for brief output for link and addresses Date: Mon, 24 Aug 2015 14:08:29 -0700 Message-ID: <20150824140829.7d014d87@urahara> References: <9a703fa7b69649518cbe0341ff261fe2@HQ1WP-EXMB11.corp.brocade.com> Mime-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Cc: "netdev@vger.kernel.org" To: Andy Gospodarek Return-path: Received: from mx0b-000f0801.pphosted.com ([67.231.152.113]:29269 "EHLO mx0b-000f0801.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751554AbbHXVIW (ORCPT ); Mon, 24 Aug 2015 17:08:22 -0400 In-Reply-To: <9a703fa7b69649518cbe0341ff261fe2@HQ1WP-EXMB11.corp.brocade.com> Sender: netdev-owner@vger.kernel.org List-ID: On Mon, 24 Aug 2015 20:41:16 +0000 Andy Gospodarek wrote: > This adds support for slightly less output than is normally provided by > 'ip link show' and 'ip addr show'. This is a bit better when you have a > host with lots of interfaces. Sample output: > > $ ip -br link show > lo UNKNOWN 00:00:00:00:00:00 > p7p1 UP 08:00:27:9d:62:9f > p8p1 DOWN 08:00:27:dc:d8:ca > p9p1 UP 08:00:27:76:d9:75 > p7p1.100@p7p1 UP 08:00:27:9d:62:9f > > $ ip -br -4 addr show > lo UNKNOWN 127.0.0.1/8 > p7p1 UP 70.0.0.1/24 > p8p1 DOWN 80.0.0.1/24 > p7p1.100@p7p1 UP 200.0.0.1/24 > > $ ip -br -6 addr show > lo UNKNOWN ::1/128 > p7p1 UP 7000::1/8 fe80::a00:27ff:fe9d:629f/64 > p8p1 DOWN 8000::1/8 > p9p1 UP fe80::a00:27ff:fe76:d975/64 > p7p1.100@p7p1 UP fe80::a00:27ff:fe9d:629f/64 > > $ ip -br addr show p7p1 > p7p1 UP 70.0.0.1/24 7000::1/8 fe80::a00:27ff:fe9d:629f/64 > > Signed-off-by: Andy Gospodarek Cool, we could colorize this as well :-)