From: Stephen Hemminger <shemming@brocade.com>
To: Andy Gospodarek <gospo@cumulusnetworks.com>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>
Subject: Re: [PATCH iproute2 v3] add support for brief output for link and addresses
Date: Mon, 31 Aug 2015 16:28:12 -0700 [thread overview]
Message-ID: <20150831162812.25cb1d10@urahara> (raw)
In-Reply-To: <530e05e07e3d4b199e83f8644e9e18d8@HQ1WP-EXMB11.corp.brocade.com>
On Fri, 28 Aug 2015 17:45:41 +0000
Andy Gospodarek <gospo@cumulusnetworks.com> wrote:
> This adds support for slightly less output than is normally provided by
> 'ip link show' and 'ip addr show'. This is a bit better when you have a
> host with lots of interfaces. Sample output:
>
> $ ip -br link show
> lo UNKNOWN 00:00:00:00:00:00 <LOOPBACK,UP,LOWER_UP>
> p2p1 UP 08:00:27:ee:0b:3b <BROADCAST,MULTICAST,UP,LOWER_UP>
> p7p1 UP 08:00:27:9d:62:9f <BROADCAST,MULTICAST,UP,LOWER_UP>
> p8p1 DOWN 08:00:27:dc:d8:ca <NO-CARRIER,BROADCAST,MULTICAST,UP>
> p9p1 UP 08:00:27:76:d9:75 <BROADCAST,MULTICAST,UP,LOWER_UP>
> p7p1.100@p7p1 UP 08:00:27:9d:62:9f <BROADCAST,MULTICAST,UP,LOWER_UP>
>
> $ ip -br -4 addr show
> lo UNKNOWN 127.0.0.1/8
> p2p1 UP 192.168.56.2/24
> p7p1 UP 70.0.0.1/24
> p8p1 DOWN 80.0.0.1/24
> p9p1 UP 10.0.5.15/24
> p7p1.100@p7p1 UP 200.0.0.1/24
>
> $ ip -br -6 addr show
> lo UNKNOWN ::1/128
> p2p1 UP fe80::a00:27ff:feee:b3b/64
> p7p1 UP 7000::1/8 fe80::a00:27ff:fe9d:629f/64
> p8p1 DOWN 8000::1/8
> p9p1 UP fe80::a00:27ff:fe76:d975/64
> p7p1.100@p7p1 UP fe80::a00:27ff:fe9d:629f/64
>
> $ ip -br addr show p7p1
> p7p1 UP 70.0.0.1/24 7000::1/8 fe80::a00:27ff:fe9d:629f/64
>
> v2: Now with color support!
> v3: Better field width estimation (except netdev names to keep output at a
> decent width) and whitespace fixup.
>
> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Applied, thanks
next parent reply other threads:[~2015-08-31 23:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <530e05e07e3d4b199e83f8644e9e18d8@HQ1WP-EXMB11.corp.brocade.com>
2015-08-31 23:28 ` Stephen Hemminger [this message]
2015-08-28 17:45 [PATCH iproute2 v3] add support for brief output for link and addresses Andy Gospodarek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150831162812.25cb1d10@urahara \
--to=shemming@brocade.com \
--cc=gospo@cumulusnetworks.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox