[PATCH net-next 0/2] r8152: code adjustment

[PATCH net-next 0/2] r8152: code adjustment

[Hayes Wang]

Adjust test_bit(), clear_bit(), disable_aldps(), and enable_aldps().

Hayes Wang (2):
  r8152: use test_and_clear_bit
  r8152: adjust ALDPS function

 drivers/net/usb/r8152.c | 92 +++++++++++++++++++++----------------------------
 1 file changed, 40 insertions(+), 52 deletions(-)

-- 
2.4.3

[PATCH net-next 1/2] r8152: use test_and_clear_bit

[Hayes Wang]

Replace test_bit() followed by clear_bit() with test_and_clear_bit().

Signed-off-by: Hayes Wang <hayeswang-Rasf1IRRPZFBDgjK7y7TUQ@public.gmane.org>
---
 drivers/net/usb/r8152.c | 20 ++++++--------------
 1 file changed, 6 insertions(+), 14 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 975e917..4f0bb67 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1938,7 +1938,6 @@ static void _rtl8152_set_rx_mode(struct net_device *netdev)
 	__le32 tmp[2];
 	u32 ocp_data;
 
-	clear_bit(RTL8152_SET_RX_MODE, &tp->flags);
 	netif_stop_queue(netdev);
 	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
 	ocp_data &= ~RCR_ACPT_ALL;
@@ -2424,8 +2423,6 @@ static void rtl_phy_reset(struct r8152 *tp)
 	u16 data;
 	int i;
 
-	clear_bit(PHY_RESET, &tp->flags);
-
 	data = r8152_mdio_read(tp, MII_BMCR);
 
 	/* don't reset again before the previous one complete */
@@ -2884,10 +2881,9 @@ static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex)
 	r8152_mdio_write(tp, MII_ADVERTISE, anar);
 	r8152_mdio_write(tp, MII_BMCR, bmcr);
 
-	if (test_bit(PHY_RESET, &tp->flags)) {
+	if (test_and_clear_bit(PHY_RESET, &tp->flags)) {
 		int i;
 
-		clear_bit(PHY_RESET, &tp->flags);
 		for (i = 0; i < 50; i++) {
 			msleep(20);
 			if ((r8152_mdio_read(tp, MII_BMCR) & BMCR_RESET) == 0)
@@ -2896,7 +2892,6 @@ static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex)
 	}
 
 out:
-
 	return ret;
 }
 
@@ -2983,7 +2978,6 @@ static void set_carrier(struct r8152 *tp)
 	struct net_device *netdev = tp->netdev;
 	u8 speed;
 
-	clear_bit(RTL8152_LINK_CHG, &tp->flags);
 	speed = rtl8152_get_speed(tp);
 
 	if (speed & LINK_STATUS) {
@@ -3026,20 +3020,18 @@ static void rtl_work_func_t(struct work_struct *work)
 		goto out1;
 	}
 
-	if (test_bit(RTL8152_LINK_CHG, &tp->flags))
+	if (test_and_clear_bit(RTL8152_LINK_CHG, &tp->flags))
 		set_carrier(tp);
 
-	if (test_bit(RTL8152_SET_RX_MODE, &tp->flags))
+	if (test_and_clear_bit(RTL8152_SET_RX_MODE, &tp->flags))
 		_rtl8152_set_rx_mode(tp->netdev);
 
 	/* don't schedule napi before linking */
-	if (test_bit(SCHEDULE_NAPI, &tp->flags) &&
-	    netif_carrier_ok(tp->netdev)) {
-		clear_bit(SCHEDULE_NAPI, &tp->flags);
+	if (test_and_clear_bit(SCHEDULE_NAPI, &tp->flags) &&
+	    netif_carrier_ok(tp->netdev))
 		napi_schedule(&tp->napi);
-	}
 
-	if (test_bit(PHY_RESET, &tp->flags))
+	if (test_and_clear_bit(PHY_RESET, &tp->flags))
 		rtl_phy_reset(tp);
 
 	mutex_unlock(&tp->control);
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH net-next 2/2] r8152: adjust ALDPS function

[Hayes Wang]

Replace disable_aldps() and enable_aldps() with aldps_en().

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
 drivers/net/usb/r8152.c | 72 +++++++++++++++++++++++--------------------------
 1 file changed, 34 insertions(+), 38 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 4f0bb67..230c73c 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -2452,23 +2452,23 @@ static void r8153_teredo_off(struct r8152 *tp)
 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TEREDO_TIMER, 0);
 }
 
-static void r8152b_disable_aldps(struct r8152 *tp)
+static void r8152_aldps_en(struct r8152 *tp, bool enable)
 {
-	ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPDNPS | LINKENA | DIS_SDSAVE);
-	msleep(20);
-}
-
-static inline void r8152b_enable_aldps(struct r8152 *tp)
-{
-	ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPWRSAVE | ENPDNPS |
-					    LINKENA | DIS_SDSAVE);
+	if (enable) {
+		ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPWRSAVE | ENPDNPS |
+						    LINKENA | DIS_SDSAVE);
+	} else {
+		ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPDNPS | LINKENA |
+						    DIS_SDSAVE);
+		msleep(20);
+	}
 }
 
 static void rtl8152_disable(struct r8152 *tp)
 {
-	r8152b_disable_aldps(tp);
+	r8152_aldps_en(tp, false);
 	rtl_disable(tp);
-	r8152b_enable_aldps(tp);
+	r8152_aldps_en(tp, true);
 }
 
 static void r8152b_hw_phy_cfg(struct r8152 *tp)
@@ -2780,30 +2780,26 @@ static void r8153_enter_oob(struct r8152 *tp)
 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
 }
 
-static void r8153_disable_aldps(struct r8152 *tp)
+static void r8153_aldps_en(struct r8152 *tp, bool enable)
 {
 	u16 data;
 
 	data = ocp_reg_read(tp, OCP_POWER_CFG);
-	data &= ~EN_ALDPS;
-	ocp_reg_write(tp, OCP_POWER_CFG, data);
-	msleep(20);
-}
-
-static void r8153_enable_aldps(struct r8152 *tp)
-{
-	u16 data;
-
-	data = ocp_reg_read(tp, OCP_POWER_CFG);
-	data |= EN_ALDPS;
-	ocp_reg_write(tp, OCP_POWER_CFG, data);
+	if (enable) {
+		data |= EN_ALDPS;
+		ocp_reg_write(tp, OCP_POWER_CFG, data);
+	} else {
+		data &= ~EN_ALDPS;
+		ocp_reg_write(tp, OCP_POWER_CFG, data);
+		msleep(20);
+	}
 }
 
 static void rtl8153_disable(struct r8152 *tp)
 {
-	r8153_disable_aldps(tp);
+	r8153_aldps_en(tp, false);
 	rtl_disable(tp);
-	r8153_enable_aldps(tp);
+	r8153_aldps_en(tp, true);
 	usb_enable_lpm(tp->udev);
 }
 
@@ -2900,9 +2896,9 @@ static void rtl8152_up(struct r8152 *tp)
 	if (test_bit(RTL8152_UNPLUG, &tp->flags))
 		return;
 
-	r8152b_disable_aldps(tp);
+	r8152_aldps_en(tp, false);
 	r8152b_exit_oob(tp);
-	r8152b_enable_aldps(tp);
+	r8152_aldps_en(tp, true);
 }
 
 static void rtl8152_down(struct r8152 *tp)
@@ -2913,9 +2909,9 @@ static void rtl8152_down(struct r8152 *tp)
 	}
 
 	r8152_power_cut_en(tp, false);
-	r8152b_disable_aldps(tp);
+	r8152_aldps_en(tp, false);
 	r8152b_enter_oob(tp);
-	r8152b_enable_aldps(tp);
+	r8152_aldps_en(tp, true);
 }
 
 static void rtl8153_up(struct r8152 *tp)
@@ -2924,9 +2920,9 @@ static void rtl8153_up(struct r8152 *tp)
 		return;
 
 	r8153_u1u2en(tp, false);
-	r8153_disable_aldps(tp);
+	r8153_aldps_en(tp, false);
 	r8153_first_init(tp);
-	r8153_enable_aldps(tp);
+	r8153_aldps_en(tp, true);
 	r8153_u2p3en(tp, true);
 	r8153_u1u2en(tp, true);
 	usb_enable_lpm(tp->udev);
@@ -2942,9 +2938,9 @@ static void rtl8153_down(struct r8152 *tp)
 	r8153_u1u2en(tp, false);
 	r8153_u2p3en(tp, false);
 	r8153_power_cut_en(tp, false);
-	r8153_disable_aldps(tp);
+	r8153_aldps_en(tp, false);
 	r8153_enter_oob(tp);
-	r8153_enable_aldps(tp);
+	r8153_aldps_en(tp, true);
 }
 
 static bool rtl8152_in_nway(struct r8152 *tp)
@@ -3230,7 +3226,7 @@ static void r8152b_init(struct r8152 *tp)
 	if (test_bit(RTL8152_UNPLUG, &tp->flags))
 		return;
 
-	r8152b_disable_aldps(tp);
+	r8152_aldps_en(tp, false);
 
 	if (tp->version == RTL_VER_01) {
 		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE);
@@ -3252,7 +3248,7 @@ static void r8152b_init(struct r8152 *tp)
 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_GPHY_INTR_IMR, ocp_data);
 
 	r8152b_enable_eee(tp);
-	r8152b_enable_aldps(tp);
+	r8152_aldps_en(tp, true);
 	r8152b_enable_fc(tp);
 	rtl_tally_reset(tp);
 
@@ -3270,7 +3266,7 @@ static void r8153_init(struct r8152 *tp)
 	if (test_bit(RTL8152_UNPLUG, &tp->flags))
 		return;
 
-	r8153_disable_aldps(tp);
+	r8153_aldps_en(tp, false);
 	r8153_u1u2en(tp, false);
 
 	for (i = 0; i < 500; i++) {
@@ -3359,7 +3355,7 @@ static void r8153_init(struct r8152 *tp)
 		       EEE_SPDWN_EN);
 
 	r8153_enable_eee(tp);
-	r8153_enable_aldps(tp);
+	r8153_aldps_en(tp, true);
 	r8152b_enable_fc(tp);
 	rtl_tally_reset(tp);
 	r8153_u2p3en(tp, true);
-- 
2.4.3

Re: [PATCH net-next 0/2] r8152: code adjustment

[David Miller]

From: Hayes Wang <hayeswang@realtek.com>
Date: Thu, 7 Jan 2016 17:51:10 +0800

> Adjust test_bit(), clear_bit(), disable_aldps(), and enable_aldps().

Series applied, thanks.