From: Tina Ruchandani <ruchandani.tina-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
Cc: y2038-cunTk1MwBs8s++Sfvej+rw@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v3] prism54: isl_38xx: Replace 'struct timeval'
Date: Tue, 12 Apr 2016 23:09:16 -0700 [thread overview]
Message-ID: <20160413060916.GA21184@localhost> (raw)
'struct timeval' uses a 32-bit seconds field which will overflow in
year 2038 and beyond. This patch is part of a larger effort to remove
all instances of 'struct timeval' from the kernel and replace them
with 64-bit timekeeping variables.
The patch also fixes the debug printf specifier to avoid the
seconds value being truncated.
The patch was build-tested / debugged by removing the
"if VERBOSE > SHOW_ERROR_MESSAGES" guards.
Signed-off-by: Tina Ruchandani <ruchandani.tina-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Suggested-by: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
--
Changes in v3:
Fix commit message
Changes in v2:
Changed printf specifier as suggested by Arnd Bergmann to
avoid truncation.
---
drivers/net/wireless/intersil/prism54/isl_38xx.c | 35 ++++++++++++------------
1 file changed, 18 insertions(+), 17 deletions(-)
diff --git a/drivers/net/wireless/intersil/prism54/isl_38xx.c b/drivers/net/wireless/intersil/prism54/isl_38xx.c
index 333c1a2..6700387 100644
--- a/drivers/net/wireless/intersil/prism54/isl_38xx.c
+++ b/drivers/net/wireless/intersil/prism54/isl_38xx.c
@@ -19,6 +19,7 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/delay.h>
+#include <linux/ktime.h>
#include <asm/uaccess.h>
#include <asm/io.h>
@@ -113,7 +114,7 @@ isl38xx_trigger_device(int asleep, void __iomem *device_base)
#if VERBOSE > SHOW_ERROR_MESSAGES
u32 counter = 0;
- struct timeval current_time;
+ struct timespec64 current_ts64;
DEBUG(SHOW_FUNCTION_CALLS, "isl38xx trigger device\n");
#endif
@@ -121,22 +122,22 @@ isl38xx_trigger_device(int asleep, void __iomem *device_base)
if (asleep) {
/* device is in powersave, trigger the device for wakeup */
#if VERBOSE > SHOW_ERROR_MESSAGES
- do_gettimeofday(¤t_time);
- DEBUG(SHOW_TRACING, "%08li.%08li Device wakeup triggered\n",
- current_time.tv_sec, (long)current_time.tv_usec);
+ ktime_get_real_ts64(¤t_ts64);
+ DEBUG(SHOW_TRACING, "%lld.%09ld Device wakeup triggered\n",
+ (s64)current_ts64.tv_sec, current_ts64.tv_nsec);
- DEBUG(SHOW_TRACING, "%08li.%08li Device register read %08x\n",
- current_time.tv_sec, (long)current_time.tv_usec,
+ DEBUG(SHOW_TRACING, "%lld.%09ld Device register read %08x\n",
+ (s64)current_ts64.tv_sec, current_ts64.tv_nsec,
readl(device_base + ISL38XX_CTRL_STAT_REG));
#endif
reg = readl(device_base + ISL38XX_INT_IDENT_REG);
if (reg == 0xabadface) {
#if VERBOSE > SHOW_ERROR_MESSAGES
- do_gettimeofday(¤t_time);
+ ktime_get_real_ts64(¤t_ts64);
DEBUG(SHOW_TRACING,
- "%08li.%08li Device register abadface\n",
- current_time.tv_sec, (long)current_time.tv_usec);
+ "%lld.%09ld Device register abadface\n",
+ (s64)current_ts64.tv_sec, current_ts64.tv_nsec);
#endif
/* read the Device Status Register until Sleepmode bit is set */
while (reg = readl(device_base + ISL38XX_CTRL_STAT_REG),
@@ -149,13 +150,13 @@ isl38xx_trigger_device(int asleep, void __iomem *device_base)
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING,
- "%08li.%08li Device register read %08x\n",
- current_time.tv_sec, (long)current_time.tv_usec,
+ "%lld.%09ld Device register read %08x\n",
+ (s64)current_ts64.tv_sec, current_ts64.tv_nsec,
readl(device_base + ISL38XX_CTRL_STAT_REG));
- do_gettimeofday(¤t_time);
+ ktime_get_real_ts64(¤t_ts64);
DEBUG(SHOW_TRACING,
- "%08li.%08li Device asleep counter %i\n",
- current_time.tv_sec, (long)current_time.tv_usec,
+ "%lld.%09ld Device asleep counter %i\n",
+ (s64)current_ts64.tv_sec, current_ts64.tv_nsec,
counter);
#endif
}
@@ -168,9 +169,9 @@ isl38xx_trigger_device(int asleep, void __iomem *device_base)
/* perform another read on the Device Status Register */
reg = readl(device_base + ISL38XX_CTRL_STAT_REG);
- do_gettimeofday(¤t_time);
- DEBUG(SHOW_TRACING, "%08li.%08li Device register read %08x\n",
- current_time.tv_sec, (long)current_time.tv_usec, reg);
+ ktime_get_real_ts64(¤t_ts64);
+ DEBUG(SHOW_TRACING, "%lld.%00ld Device register read %08x\n",
+ (s64)current_ts64.tv_sec, current_ts64.tv_nsec, reg);
#endif
} else {
/* device is (still) awake */
--
2.8.0.rc3.226.g39d4020
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2016-04-13 6:09 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-13 6:09 Tina Ruchandani [this message]
2016-04-13 8:38 ` [PATCH v3] prism54: isl_38xx: Replace 'struct timeval' Johannes Berg
2016-04-13 9:45 ` Arend Van Spriel
2016-04-16 23:34 ` Arnd Bergmann
2016-04-17 12:42 ` Johannes Berg
2016-04-17 22:10 ` Arnd Bergmann
2016-04-19 8:57 ` Johannes Berg
2016-04-22 18:09 ` Kalle Valo
2016-04-23 1:30 ` Luis R. Rodriguez
2016-04-26 9:10 ` [v3] " Kalle Valo
2016-04-26 9:10 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160413060916.GA21184@localhost \
--to=ruchandani.tina-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=y2038-cunTk1MwBs8s++Sfvej+rw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).