From: Alexander Duyck <aduyck@mirantis.com>
To: talal@mellanox.com, netdev@vger.kernel.org,
michael.chan@broadcom.com, davem@davemloft.net,
galp@mellanox.com, ogerlitz@mellanox.com, eranbe@mellanox.com
Subject: [net-next PATCH v2 0/9] Fix Tunnel features and enable GSO partial for several drivers
Date: Fri, 29 Apr 2016 15:43:02 -0700 [thread overview]
Message-ID: <20160429222735.12418.61229.stgit@ahduyck-xeon-server> (raw)
This patch series is meant to allow us to get the best performance possible
for Mellanox ConnectX-3/4 and Broadcom NetXtreme-C/E adapters in terms of
VXLAN and GRE tunnels.
The first few patches address issues I found when just trying to collect
performance numbers. Specifically I was unable to get rates of any more
than 1 or 2 Mb/s if I was using a tunnel that ran over IPv6. In addition I
found a few other items related to GSO_PARTIAL and the TSO_MANGLEID that
needed to be addressed.
The next 4 patches go through and enable GSO_PARTIAL for VXLAN tunnels that
have an outer checksum enabled, and then enable IPv6 support where I can.
One outstanding issue is that I wasn't able to get offloads working with
outer IPv6 headers on mlx4. However that wasn't a feature that was enabled
before so it isn't technically a regression, however I believe Engineers
from Mellanox said they would look into it since they thought it should be
supported.
The last patch enables GSO_PARTIAL for VXLAN and GRE tunnels on the bnxt
driver. One piece of feedback I received on the patch was that the
hardware has globally set IPv6 UDP tunnels to always have the checksum
field computed. I plan to work with Broadcom to get that addressed so that
we only populate the checksum field if it was requested by the network
stack.
v2: Rebased patches off of latest changes to the mlx4/mlx5 drivers.
Added bnxt driver patch as I received feedback on the RFC.
There are outstanding issues that need to be addressed, however they
were present before these patches so it isn't as if they introduce a
regression. In addition gains can be easily seen so there should be no
issue with applying the driver patches while the IPv6 mlx4 and bnxt
issues are being researched.
---
Alexander Duyck (9):
net: Disable segmentation if checksumming is not supported
gso: Only allow GSO_PARTIAL if we can checksum the inner protocol
net: Fix netdev_fix_features so that TSO_MANGLEID is only available with TSO
vxlan: Add checksum check to the features check function
mlx4: Add support for UDP tunnel segmentation with outer checksum offload
mlx4: Add support for inner IPv6 checksum offloads and TSO
mlx5e: Add support for UDP tunnel segmentation with outer checksum offload
mlx5e: Fix IPv6 tunnel checksum offload
bnxt: Add support for segmentation of tunnels with outer checksums
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 9 ++++-
drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 38 +++++++++++++++++----
drivers/net/ethernet/mellanox/mlx4/en_tx.c | 15 +++++++-
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 10 ++++--
include/linux/if_ether.h | 5 +++
include/net/vxlan.h | 4 ++
net/core/dev.c | 6 +++
net/core/skbuff.c | 6 ++-
8 files changed, 74 insertions(+), 19 deletions(-)
next reply other threads:[~2016-04-29 22:43 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-29 22:43 Alexander Duyck [this message]
2016-04-29 22:43 ` [net-next PATCH v2 1/9] net: Disable segmentation if checksumming is not supported Alexander Duyck
2016-05-01 20:30 ` Or Gerlitz
2016-05-02 2:16 ` Alexander Duyck
2016-04-29 22:43 ` [net-next PATCH v2 2/9] gso: Only allow GSO_PARTIAL if we can checksum the inner protocol Alexander Duyck
2016-04-29 22:43 ` [net-next PATCH v2 3/9] net: Fix netdev_fix_features so that TSO_MANGLEID is only available with TSO Alexander Duyck
2016-04-29 22:43 ` [net-next PATCH v2 4/9] vxlan: Add checksum check to the features check function Alexander Duyck
2016-04-29 22:43 ` [net-next PATCH v2 5/9] mlx4: Add support for UDP tunnel segmentation with outer checksum offload Alexander Duyck
2016-05-01 20:28 ` Saeed Mahameed
2016-05-01 20:35 ` Or Gerlitz
2016-05-02 2:25 ` Alexander Duyck
2016-05-02 7:19 ` Or Gerlitz
2016-05-02 15:41 ` Alexander Duyck
2016-05-03 12:41 ` Or Gerlitz
2016-05-03 15:29 ` Alexander Duyck
2016-05-04 15:50 ` Or Gerlitz
2016-05-04 16:06 ` Alex Duyck
2016-05-05 21:39 ` Or Gerlitz
2016-05-05 22:00 ` Alexander Duyck
2016-04-29 22:43 ` [net-next PATCH v2 6/9] mlx4: Add support for inner IPv6 checksum offloads and TSO Alexander Duyck
2016-05-01 20:21 ` Saeed Mahameed
2016-04-29 22:43 ` [net-next PATCH v2 7/9] mlx5e: Add support for UDP tunnel segmentation with outer checksum offload Alexander Duyck
2016-05-01 20:08 ` Saeed Mahameed
2016-04-29 22:43 ` [net-next PATCH v2 8/9] mlx5e: Fix IPv6 tunnel " Alexander Duyck
2016-05-01 20:09 ` Saeed Mahameed
2016-04-29 22:43 ` [net-next PATCH v2 9/9] bnxt: Add support for segmentation of tunnels with outer checksums Alexander Duyck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160429222735.12418.61229.stgit@ahduyck-xeon-server \
--to=aduyck@mirantis.com \
--cc=davem@davemloft.net \
--cc=eranbe@mellanox.com \
--cc=galp@mellanox.com \
--cc=michael.chan@broadcom.com \
--cc=netdev@vger.kernel.org \
--cc=ogerlitz@mellanox.com \
--cc=talal@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).