Re: [PATCH v9 net-next 4/7] openvswitch: add layer 3 flow/port support

[Simon Horman <simon.horman-wFxRvT7yatFl57MIdRCFDg@public.gmane.org>]

Hi Jiri,

On Wed, May 11, 2016 at 10:50:09AM +0900, Simon Horman wrote:

[...]

> > > Its possible that I've overlooked something but as things stand I think
> > > things look like this:
> > > 
> > > * ovs_flow_key_extract() keys off dev->type and skb->protocol.
> > > * ovs_flow_key_extract() calls key_extract() which amongst other things
> > >   sets up the skb->mac_header and skb->mac_len of the skb.
> > > * ovs_flow_key_extract() sets skb->protocol to that of the inner packet
> > >   in the case of TEB
> > > * Actions update the above mentioned skb fields as appropriate.
> > 
> > Okay, that actually eases things somewhat.
> > 
> > > So it seems to me that it should be safe to rely on skb->protocol
> > > in the receive path. Or more specifically, in netdev_port_receive().
> > > 
> > > If mac_len is also able to be used then I think fine. But it seems to me
> > > that it needs to be set up by OvS at least for the ARPHRD_NONE case. This
> > > could be done early on, say in netdev_port_receive(). But it seems that
> > > would involve duplicating some of what is already occurring in
> > > key_extract().
> > 
> > I'd actually prefer doing this earlier, netdev_port_receive looks like
> > the right place. Just set mac_len there (or whatever) and let
> > key_extract do the rest of the work, not depending on dev->type in
> > there.
> > 
> > My point about recirculation was not actually valid, as I missed you're
> > doing this in ovs_flow_key_extract and not in key_extract. Still,
> > I think the special handling of particular interface types belongs to
> > the tx processing on those interfaces, not to the common code.
> 
> Sure, if that is your preference I think it should be simple enough to
> implement. I agree that netdev_port_receive() looks like a good place for
> this.

So far I have the following, which seems to work
changes to make dev->type ARPHRD_NONE for compat GRE vports.

Is this close to what you had in mind?

diff --git a/net/openvswitch/flow.c b/net/openvswitch/flow.c
index d320c2657627..4d2698596033 100644
--- a/net/openvswitch/flow.c
+++ b/net/openvswitch/flow.c
@@ -700,8 +700,6 @@ int ovs_flow_key_update(struct sk_buff *skb, struct sw_flow_key *key)
 int ovs_flow_key_extract(const struct ip_tunnel_info *tun_info,
 			 struct sk_buff *skb, struct sw_flow_key *key)
 {
-	bool is_layer3 = false;
-	bool is_teb = false;
 	int err;
 
 	/* Extract metadata from packet. */
@@ -709,14 +707,6 @@ int ovs_flow_key_extract(const struct ip_tunnel_info *tun_info,
 		key->tun_proto = ip_tunnel_info_af(tun_info);
 		memcpy(&key->tun_key, &tun_info->key, sizeof(key->tun_key));
 
-		if (OVS_CB(skb)->input_vport->dev->type != ARPHRD_ETHER) {
-			if (skb->protocol == htons(ETH_P_TEB))
-				is_teb = true;
-			else
-				is_layer3 = true;
-		}
-
-
 		if (tun_info->options_len) {
 			BUILD_BUG_ON((1 << (sizeof(tun_info->options_len) *
 						   8)) - 1
@@ -739,17 +729,17 @@ int ovs_flow_key_extract(const struct ip_tunnel_info *tun_info,
 	key->phy.skb_mark = skb->mark;
 	ovs_ct_fill_key(skb, key);
 	key->ovs_flow_hash = 0;
-	key->phy.is_layer3 = is_layer3;
+	key->phy.is_layer3 = (tun_info && skb->mac_len == 0);
 	key->recirc_id = 0;
 
 	err = key_extract(skb, key);
 	if (err < 0)
 		return err;
 
-	if (is_teb)
-		skb->protocol = key->eth.type;
-	else if (is_layer3)
+	if (key->phy.is_layer3)
 		key->eth.type = skb->protocol;
+	else if (tun_info && skb->protocol == htons(ETH_P_TEB))
+		skb->protocol = key->eth.type;
 
 	return err;
 }
diff --git a/net/openvswitch/vport-netdev.c b/net/openvswitch/vport-netdev.c
index 7d54414b35eb..ac8178ac2c81 100644
--- a/net/openvswitch/vport-netdev.c
+++ b/net/openvswitch/vport-netdev.c
@@ -60,7 +60,21 @@ static void netdev_port_receive(struct sk_buff *skb)
 	if (vport->dev->type == ARPHRD_ETHER) {
 		skb_push(skb, ETH_HLEN);
 		skb_postpush_rcsum(skb, skb->data, ETH_HLEN);
+	} else if (vport->dev->type == ARPHRD_NONE) {
+		if (skb->protocol == htons(ETH_P_TEB)) {
+			struct ethhdr *eth = eth_hdr(skb);
+
+			if (unlikely(skb->len < ETH_HLEN))
+				goto error;
+
+			skb->mac_len = ETH_HLEN;
+			if (eth->h_proto == htons(ETH_P_8021Q))
+				skb->mac_len += VLAN_HLEN;
+		} else {
+			skb->mac_len = 0;
+		}
 	}
+
 	ovs_vport_receive(vport, skb, skb_tunnel_info(skb));
 	return;
 error:
_______________________________________________
dev mailing list
dev@openvswitch.org
http://openvswitch.org/mailman/listinfo/dev