Netdev List
 help / color / mirror / Atom feed
From: ggarcia@abra.uab.cat
To: netdev@vger.kernel.org
Cc: jhansen@vmware.com, stefanha@redhat.com,
	Gerard Garcia <ggarcia@abra.uab.cat>
Subject: [RFC 2/3] vsockmon: Add vsockmon device
Date: Sat, 28 May 2016 18:29:06 +0200	[thread overview]
Message-ID: <20160528162907.14809-3-ggarcia@deic.uab.cat> (raw)
In-Reply-To: <20160528162907.14809-1-ggarcia@deic.uab.cat>

From: Gerard Garcia <ggarcia@deic.uab.cat>

Signed-off-by: Gerard Garcia <ggarcia@deic.uab.cat>
---
 drivers/net/Kconfig           |   8 ++
 drivers/net/Makefile          |   1 +
 drivers/net/vsockmon.c        | 171 ++++++++++++++++++++++++++++++++++++++++++
 include/uapi/linux/Kbuild     |   1 +
 include/uapi/linux/vsockmon.h |  37 +++++++++
 5 files changed, 218 insertions(+)
 create mode 100644 drivers/net/vsockmon.c
 create mode 100644 include/uapi/linux/vsockmon.h

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 0c5415b..42c43b6 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -330,6 +330,14 @@ config NET_VRF
 	  This option enables the support for mapping interfaces into VRF's. The
 	  support enables VRF devices.
 
+config VSOCKMON
+    tristate "Virtual vsock monitoring device"
+    depends on VHOST_VSOCK
+    ---help---
+     This option enables a monitoring net device for vsock sockets. It is
+     mostly intended for developers or support to debug vsock issues. If
+     unsure, say N.
+
 endif # NET_CORE
 
 config SUNGEM_PHY
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 7336cbd..e2188d4 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_GENEVE) += geneve.o
 obj-$(CONFIG_GTP) += gtp.o
 obj-$(CONFIG_NLMON) += nlmon.o
 obj-$(CONFIG_NET_VRF) += vrf.o
+obj-$(CONFIG_VSOCKMON) += vsockmon.o
 
 #
 # Networking Drivers
diff --git a/drivers/net/vsockmon.c b/drivers/net/vsockmon.c
new file mode 100644
index 0000000..becddc9
--- /dev/null
+++ b/drivers/net/vsockmon.c
@@ -0,0 +1,171 @@
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/if_arp.h>
+#include <net/rtnetlink.h>
+#include <net/sock.h>
+#include <net/af_vsock.h>
+#include <uapi/linux/vsockmon.h>
+
+/* Virtio transport max packet size plus header */
+#define DEFAULT_MTU 1024 * 64 + sizeof(struct af_vsockmon_hdr);
+
+struct pcpu_lstats {
+	u64 rx_packets;
+	u64 rx_bytes;
+	struct u64_stats_sync syncp;
+};
+
+static int vsockmon_dev_init(struct net_device *dev)
+{
+	dev->lstats = netdev_alloc_pcpu_stats(struct pcpu_lstats);
+	return dev->lstats == NULL ? -ENOMEM : 0;
+}
+
+static void vsockmon_dev_uninit(struct net_device *dev)
+{
+	free_percpu(dev->lstats);
+}
+
+struct vsockmon {
+	struct vsock_tap vt;
+};
+
+static int vsockmon_open(struct net_device *dev)
+{
+	struct vsockmon *vsockmon = netdev_priv(dev);
+
+	vsockmon->vt.dev = dev;
+	vsockmon->vt.module = THIS_MODULE;
+	return vsock_add_tap(&vsockmon->vt);
+}
+
+static int vsockmon_close(struct net_device *dev) {
+	struct vsockmon *vsockmon = netdev_priv(dev);
+
+	return vsock_remove_tap(&vsockmon->vt);
+}
+
+static netdev_tx_t vsockmon_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	int len = skb->len;
+	struct pcpu_lstats *stats = this_cpu_ptr(dev->lstats);
+
+	u64_stats_update_begin(&stats->syncp);
+	stats->rx_bytes += len;
+	stats->rx_packets++;
+	u64_stats_update_end(&stats->syncp);
+
+	dev_kfree_skb(skb);
+
+	return NETDEV_TX_OK;
+}
+
+static struct rtnl_link_stats64 *
+vsockmon_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats)
+{
+	int i;
+	u64 bytes = 0, packets = 0;
+
+	for_each_possible_cpu(i) {
+		const struct pcpu_lstats *vstats;
+		u64 tbytes, tpackets;
+		unsigned int start;
+
+		vstats = per_cpu_ptr(dev->lstats, i);
+
+		do {
+			start = u64_stats_fetch_begin_irq(&vstats->syncp);
+			tbytes = vstats->rx_bytes;
+			tpackets = vstats->rx_packets;
+		} while (u64_stats_fetch_retry_irq(&vstats->syncp, start));
+
+		packets += tpackets;
+		bytes += tbytes;
+	}
+
+	stats->rx_packets = packets;
+	stats->tx_packets = 0;
+
+	stats->rx_bytes = bytes;
+	stats->tx_bytes = 0;
+
+	return stats;
+}
+
+static int vsockmon_is_valid_mtu(int new_mtu)
+{
+	return new_mtu >= (int) sizeof(struct af_vsockmon_hdr);
+}
+
+static int vsockmon_change_mtu(struct net_device *dev, int new_mtu)
+{
+	if (!vsockmon_is_valid_mtu(new_mtu))
+		return -EINVAL;
+
+	dev->mtu = new_mtu;
+	return 0;
+}
+
+static const struct net_device_ops vsockmon_ops = {
+	.ndo_init = vsockmon_dev_init,
+	.ndo_uninit = vsockmon_dev_uninit,
+	.ndo_open = vsockmon_open,
+	.ndo_stop = vsockmon_close,
+	.ndo_start_xmit = vsockmon_xmit,
+	.ndo_get_stats64 = vsockmon_get_stats64,
+	.ndo_change_mtu = vsockmon_change_mtu,
+};
+
+static u32 always_on(struct net_device *dev)
+{
+	return 1;
+}
+
+static const struct ethtool_ops vsockmon_ethtool_ops = {
+	.get_link = always_on,
+};
+
+static void vsockmon_setup(struct net_device *dev)
+{
+	dev->type = ARPHRD_VSOCKMON;
+	dev->priv_flags |= IFF_NO_QUEUE;
+
+	dev->netdev_ops	= &vsockmon_ops;
+	dev->ethtool_ops = &vsockmon_ethtool_ops;
+	dev->destructor	= free_netdev;
+
+	dev->features = NETIF_F_SG | NETIF_F_FRAGLIST |
+			NETIF_F_HIGHDMA | NETIF_F_LLTX;
+
+	dev->flags = IFF_NOARP;
+
+	dev->mtu = DEFAULT_MTU;
+}
+
+static struct rtnl_link_ops vsockmon_link_ops __read_mostly = {
+	.kind			= "vsockmon",
+	.priv_size		= sizeof(struct vsockmon),
+	.setup			= vsockmon_setup,
+};
+
+static __init int vsockmon_register(void)
+{
+	int ret = rtnl_link_register(&vsockmon_link_ops);
+	if (!ret)
+		vsock_init_tap();
+
+	return ret;
+}
+
+static __exit void vsockmon_unregister(void)
+{
+	rtnl_link_unregister(&vsockmon_link_ops);
+}
+
+module_init(vsockmon_register);
+module_exit(vsockmon_unregister);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Gerard Garcia <ggarcia@deic.uab.cat>");
+MODULE_DESCRIPTION("Vsock monitoring device");
+MODULE_ALIAS_RTNL_LINK("vsockmon");
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index 5f047d2..b1836cc 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -454,6 +454,7 @@ header-y += virtio_scsi.h
 header-y += virtio_types.h
 header-y += virtio_vsock.h
 header-y += vm_sockets.h
+header-y += vsockmon.h
 header-y += vt.h
 header-y += wait.h
 header-y += wanrouter.h
diff --git a/include/uapi/linux/vsockmon.h b/include/uapi/linux/vsockmon.h
new file mode 100644
index 0000000..c73166f
--- /dev/null
+++ b/include/uapi/linux/vsockmon.h
@@ -0,0 +1,37 @@
+#ifndef _UAPI_VSOCKMON_H
+#define _UAPI_VSOCKMON_H
+
+#include <linux/virtio_vsock.h>
+
+/* Packet structure of packets received from the vsockmon device. */
+
+struct af_vsockmon_g {
+	unsigned short op; /* enum af_vsock_g_ops */
+	unsigned int src_cid;
+	unsigned int src_port;
+	unsigned int dst_cid;
+	unsigned int dst_port;
+};
+
+struct af_vsockmon_hdr {
+	unsigned short type;  /* enum af_vosck_type */
+	struct af_vsockmon_g g_hdr;
+	union {
+		struct virtio_vsock_hdr virtio_hdr;
+	} t_hdr;
+};
+
+enum af_vsockmon_type {
+	AF_VSOCK_GENERIC = 1, /* No transport header */
+	AF_VSOCK_VIRTIO = 2,  /* Addtional virtio transport header */
+};
+
+enum af_vsockmon_g_ops {
+	AF_VSOCK_G_OP_UNKNOWN = 0,
+	AF_VSOCK_G_OP_CONNECT = 1,
+	AF_VSOCK_G_OP_DISCONNECT = 2,
+	AF_VSOCK_G_OP_CONTROL = 3,
+	AF_VSOCK_G_OP_PAYLOAD = 4,
+};
+
+#endif
-- 
2.8.3

  parent reply	other threads:[~2016-05-28 17:29 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-28 16:29 [RFC 0/3] vsockmon: virtual device to monitor AF_VSOCK sockets ggarcia
2016-05-28 16:29 ` [RFC 1/3] vsockmon: Add tap functions ggarcia
2016-06-01 21:07   ` Stefan Hajnoczi
2016-06-09 15:02     ` Gerard Garcia
2016-06-10 15:44       ` Stefan Hajnoczi
2016-06-14 12:05         ` Jorgen S. Hansen
2016-05-28 16:29 ` ggarcia [this message]
2016-06-01 21:15   ` [RFC 2/3] vsockmon: Add vsockmon device Stefan Hajnoczi
2016-06-09 15:21     ` Gerard Garcia
2016-06-10 15:37       ` Stefan Hajnoczi
2016-05-28 16:29 ` [RFC 3/3] vsockmon: Add vsock hooks ggarcia
2016-06-01 21:19   ` Stefan Hajnoczi
2016-06-09 15:27     ` Gerard Garcia

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160528162907.14809-3-ggarcia@deic.uab.cat \
    --to=ggarcia@abra.uab.cat \
    --cc=jhansen@vmware.com \
    --cc=netdev@vger.kernel.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox