From: John Fastabend <john.fastabend@gmail.com>
To: jhs@mojatatu.com, brouer@redhat.com
Cc: netdev@vger.kernel.org
Subject: [net-next PATCH v2 1/2] net: pktgen: support injecting packets for qdisc testing
Date: Sat, 02 Jul 2016 14:12:54 -0700 [thread overview]
Message-ID: <20160702211254.13884.81202.stgit@john-Precision-Tower-5810> (raw)
Add another xmit_mode to pktgen to allow testing xmit functionality
of qdiscs. The new mode "queue_xmit" injects packets at
__dev_queue_xmit() so that qdisc is called.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
---
net/core/pktgen.c | 42 ++++++++++++++++++++++++++++++++++++++++--
1 file changed, 40 insertions(+), 2 deletions(-)
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index f74ab9c..bbd118b 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -213,6 +213,7 @@
/* Xmit modes */
#define M_START_XMIT 0 /* Default normal TX */
#define M_NETIF_RECEIVE 1 /* Inject packets into stack */
+#define M_QUEUE_XMIT 2 /* Inject packet into qdisc */
/* If lock -- protects updating of if_list */
#define if_lock(t) spin_lock(&(t->if_lock));
@@ -626,6 +627,8 @@ static int pktgen_if_show(struct seq_file *seq, void *v)
if (pkt_dev->xmit_mode == M_NETIF_RECEIVE)
seq_puts(seq, " xmit_mode: netif_receive\n");
+ else if (pkt_dev->xmit_mode == M_QUEUE_XMIT)
+ seq_puts(seq, " xmit_mode: xmit_queue\n");
seq_puts(seq, " Flags: ");
@@ -1142,8 +1145,10 @@ static ssize_t pktgen_if_write(struct file *file,
return len;
i += len;
- if ((value > 1) && (pkt_dev->xmit_mode == M_START_XMIT) &&
- (!(pkt_dev->odev->priv_flags & IFF_TX_SKB_SHARING)))
+ if ((value > 1) &&
+ ((pkt_dev->xmit_mode == M_QUEUE_XMIT) ||
+ ((pkt_dev->xmit_mode == M_START_XMIT) &&
+ (!(pkt_dev->odev->priv_flags & IFF_TX_SKB_SHARING)))))
return -ENOTSUPP;
pkt_dev->burst = value < 1 ? 1 : value;
sprintf(pg_result, "OK: burst=%d", pkt_dev->burst);
@@ -1198,6 +1203,9 @@ static ssize_t pktgen_if_write(struct file *file,
* at module loading time
*/
pkt_dev->clone_skb = 0;
+ } else if (strcmp(f, "queue_xmit") == 0) {
+ pkt_dev->xmit_mode = M_QUEUE_XMIT;
+ pkt_dev->last_ok = 1;
} else {
sprintf(pg_result,
"xmit_mode -:%s:- unknown\nAvailable modes: %s",
@@ -3434,6 +3442,36 @@ static void pktgen_xmit(struct pktgen_dev *pkt_dev)
#endif
} while (--burst > 0);
goto out; /* Skips xmit_mode M_START_XMIT */
+ } else if (pkt_dev->xmit_mode == M_QUEUE_XMIT) {
+ local_bh_disable();
+ atomic_inc(&pkt_dev->skb->users);
+
+ ret = dev_queue_xmit(pkt_dev->skb);
+ switch (ret) {
+ case NET_XMIT_SUCCESS:
+ pkt_dev->sofar++;
+ pkt_dev->seq_num++;
+ pkt_dev->tx_bytes += pkt_dev->last_pkt_size;
+ break;
+ case NET_XMIT_DROP:
+ case NET_XMIT_CN:
+ /* These are all valid return codes for a qdisc but
+ * indicate packets are being dropped or will likely
+ * be dropped soon.
+ */
+ case NETDEV_TX_BUSY:
+ /* qdisc may call dev_hard_start_xmit directly in cases
+ * where no queues exist e.g. loopback device, virtual
+ * devices, etc. In this case we need to handle
+ * NETDEV_TX_ codes.
+ */
+ default:
+ pkt_dev->errors++;
+ net_info_ratelimited("%s xmit error: %d\n",
+ pkt_dev->odevname, ret);
+ break;
+ }
+ goto out;
}
txq = skb_get_tx_queue(odev, pkt_dev->skb);
next reply other threads:[~2016-07-02 21:13 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-02 21:12 John Fastabend [this message]
2016-07-02 21:13 ` [net-next PATCH v2 2/2] net: samples: pktgen mode samples/tests for qdisc layer John Fastabend
2016-07-04 23:07 ` David Miller
2016-07-04 23:07 ` [net-next PATCH v2 1/2] net: pktgen: support injecting packets for qdisc testing David Miller
-- strict thread matches above, loose matches on Subject: below --
2016-06-29 20:03 John Fastabend
2016-06-30 8:37 ` Jesper Dangaard Brouer
2016-06-30 16:42 ` John Fastabend
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160702211254.13884.81202.stgit@john-Precision-Tower-5810 \
--to=john.fastabend@gmail.com \
--cc=brouer@redhat.com \
--cc=jhs@mojatatu.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox