From: Leon Romanovsky <leon@kernel.org>
To: Salil Mehta <salil.mehta@huawei.com>
Cc: dledford@redhat.com, davem@davemloft.net,
xavier.huwei@huawei.com, oulijun@huawei.com,
yisen.zhuang@huawei.com, mehta.salil.lnk@gmail.com,
linux-rdma@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, linuxarm@huawei.com
Subject: Re: [PATCH for-next 2/2] IB/hns: Add support of ACPI to the Hisilicon RoCE driver
Date: Wed, 24 Aug 2016 16:59:29 +0300 [thread overview]
Message-ID: <20160824135929.GU15065@leon.nu> (raw)
In-Reply-To: <1471985090-202472-3-git-send-email-salil.mehta@huawei.com>
[-- Attachment #1: Type: text/plain, Size: 6211 bytes --]
On Wed, Aug 24, 2016 at 04:44:50AM +0800, Salil Mehta wrote:
> This patch is meant to add support of ACPI to the Hisilicon RoCE
> driver.
>
> Changes done are primarily meant to detect the type and then either
> use DT specific or ACPI spcific functions. Where ever possible,
> this patch tries to make use of Unified Device Property Interface
> APIs to support both DT and ACPI through single interface.
>
> This patch depends upon HNS ethernet driver to Reset RoCE. This
> function within HNS ethernet driver has also been enhanced to
> support ACPI and is part of other accompanying patch with this
> patch-set.
>
> NOTE: The changes in this patch are done over below branch,
> https://github.com/dledford/linux/tree/hns-roce
>
> Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
> ---
> Change Log
>
> PATCH V1: Initial version to support ACPI in HNS RoCE driver.
> ---
> drivers/infiniband/hw/hns/hns_roce_device.h | 2 +-
> drivers/infiniband/hw/hns/hns_roce_eq.c | 2 +-
> drivers/infiniband/hw/hns/hns_roce_hw_v1.c | 37 ++++++--
> drivers/infiniband/hw/hns/hns_roce_hw_v1.h | 2 +-
> drivers/infiniband/hw/hns/hns_roce_main.c | 127 ++++++++++++++++++++++-----
> 5 files changed, 136 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/infiniband/hw/hns/hns_roce_device.h b/drivers/infiniband/hw/hns/hns_roce_device.h
> index 00f01be..ea73580 100644
> --- a/drivers/infiniband/hw/hns/hns_roce_device.h
> +++ b/drivers/infiniband/hw/hns/hns_roce_device.h
> @@ -531,7 +531,7 @@ struct hns_roce_dev {
> struct ib_device ib_dev;
> struct platform_device *pdev;
> struct hns_roce_uar priv_uar;
> - const char *irq_names;
> + const char *irq_names[HNS_ROCE_MAX_IRQ_NUM];
> spinlock_t sm_lock;
> spinlock_t cq_db_lock;
> spinlock_t bt_cmd_lock;
> diff --git a/drivers/infiniband/hw/hns/hns_roce_eq.c b/drivers/infiniband/hw/hns/hns_roce_eq.c
> index 5febbb4..98af7fe 100644
> --- a/drivers/infiniband/hw/hns/hns_roce_eq.c
> +++ b/drivers/infiniband/hw/hns/hns_roce_eq.c
> @@ -713,7 +713,7 @@ int hns_roce_init_eq_table(struct hns_roce_dev *hr_dev)
>
> for (j = 0; j < eq_num; j++) {
> ret = request_irq(eq_table->eq[j].irq, hns_roce_msi_x_interrupt,
> - 0, hr_dev->irq_names, eq_table->eq + j);
> + 0, hr_dev->irq_names[j], eq_table->eq + j);
> if (ret) {
> dev_err(dev, "request irq error!\n");
> goto err_request_irq_fail;
> diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v1.c b/drivers/infiniband/hw/hns/hns_roce_hw_v1.c
> index b52f3ba..399f5de 100644
> --- a/drivers/infiniband/hw/hns/hns_roce_hw_v1.c
> +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v1.c
> @@ -31,6 +31,7 @@
> */
>
> #include <linux/platform_device.h>
> +#include <linux/acpi.h>
> #include <rdma/ib_umem.h>
> #include "hns_roce_common.h"
> #include "hns_roce_device.h"
> @@ -794,29 +795,47 @@ static void hns_roce_port_enable(struct hns_roce_dev *hr_dev, int enable_flag)
> * @enable: true -- drop reset, false -- reset
> * return 0 - success , negative --fail
> */
> -int hns_roce_v1_reset(struct hns_roce_dev *hr_dev, bool enable)
> +int hns_roce_v1_reset(struct hns_roce_dev *hr_dev, bool dereset)
> {
> struct device_node *dsaf_node;
> struct device *dev = &hr_dev->pdev->dev;
> struct device_node *np = dev->of_node;
> + struct fwnode_handle *fwnode;
> int ret;
>
> - dsaf_node = of_parse_phandle(np, "dsaf-handle", 0);
> - if (!dsaf_node) {
> - dev_err(dev, "Unable to get dsaf node by dsaf-handle!\n");
> - return -EINVAL;
> + /* check if this is DT/ACPI case */
> + if (dev_of_node(dev)) {
> + dsaf_node = of_parse_phandle(np, "dsaf-handle", 0);
> + if (!dsaf_node) {
> + dev_err(dev, "could not find dsaf-handle\n");
> + return -EINVAL;
> + }
> + fwnode = &dsaf_node->fwnode;
> + } else if (is_acpi_device_node(dev->fwnode)) {
> + struct acpi_reference_args args;
> +
> + ret = acpi_node_get_property_reference(dev->fwnode,
> + "dsaf-handle", 0, &args);
> + if (ret) {
> + dev_err(dev, "could not find dsaf-handle\n");
> + return ret;
> + }
> + fwnode = acpi_fwnode_handle(args.adev);
> + } else {
> + dev_err(dev, "cannot read data from DT or ACPI\n");
> + return -ENXIO;
> }
>
> - ret = hns_dsaf_roce_reset(&dsaf_node->fwnode, false);
> + ret = hns_dsaf_roce_reset(fwnode, false);
> if (ret)
> return ret;
>
> - if (enable) {
> + if (dereset) {
> msleep(SLEEP_TIME_INTERVAL);
> - return hns_dsaf_roce_reset(&dsaf_node->fwnode, true);
> + ret = hns_dsaf_roce_reset(fwnode, true);
> }
>
> - return 0;
> + return ret;
> }
>
> void hns_roce_v1_profile(struct hns_roce_dev *hr_dev)
> diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v1.h b/drivers/infiniband/hw/hns/hns_roce_hw_v1.h
> index 2b3bf21..316b592 100644
> --- a/drivers/infiniband/hw/hns/hns_roce_hw_v1.h
> +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v1.h
> @@ -976,6 +976,6 @@ struct hns_roce_v1_priv {
> struct hns_roce_raq_table raq_table;
> };
>
> -int hns_dsaf_roce_reset(struct fwnode_handle *dsaf_fwnode, bool enable);
> +int hns_dsaf_roce_reset(struct fwnode_handle *dsaf_fwnode, bool dereset);
>
> #endif
> diff --git a/drivers/infiniband/hw/hns/hns_roce_main.c b/drivers/infiniband/hw/hns/hns_roce_main.c
> index 6ead671..f64f0dd 100644
> --- a/drivers/infiniband/hw/hns/hns_roce_main.c
> +++ b/drivers/infiniband/hw/hns/hns_roce_main.c
> @@ -30,7 +30,7 @@
> * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
> * SOFTWARE.
> */
> -
> +#include <linux/acpi.h>
> #include <linux/of_platform.h>
> #include <rdma/ib_addr.h>
> #include <rdma/ib_smi.h>
> @@ -694,40 +694,122 @@ error_failed_setup_mtu_gids:
> return ret;
> }
>
> +static const struct of_device_id hns_roce_of_match[] = {
> + { .compatible = "hisilicon,hns-roce-v1", .data = &hns_roce_hw_v1, },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, hns_roce_of_match);
> +
> +static const struct acpi_device_id hns_roce_acpi_match[] = {
> + { "HISI00D1", (kernel_ulong_t)&hns_roce_hw_v1 },
> + {},
> +};
> +MODULE_DEVICE_TABLE(acpi, hns_roce_acpi_match);
> +
> +static int hns_roce_node_match(struct device *dev, void *fwnode)
> +{
> + return dev->fwnode == fwnode;
> +}
It looks like this function should return bool and not int.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
next prev parent reply other threads:[~2016-08-24 13:59 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-23 20:44 [PATCH for-next 0/2] {IB,net}/hns: Add support of ACPI to the Hisilicon RoCE Driver Salil Mehta
2016-08-23 20:44 ` [PATCH for-next 1/2] net: hns: Add support of ACPI to HNS driver RoCE Reset function Salil Mehta
[not found] ` <1471985090-202472-1-git-send-email-salil.mehta-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2016-08-23 20:44 ` [PATCH for-next 2/2] IB/hns: Add support of ACPI to the Hisilicon RoCE driver Salil Mehta
2016-08-24 13:59 ` Leon Romanovsky [this message]
2016-08-24 14:25 ` Salil Mehta
2016-08-24 14:52 ` Leon Romanovsky
2016-08-25 4:53 ` [PATCH for-next 0/2] {IB,net}/hns: Add support of ACPI to the Hisilicon RoCE Driver David Miller
2016-08-25 11:57 ` Doug Ledford
2016-08-25 12:08 ` Salil Mehta
2016-08-25 14:09 ` Doug Ledford
2016-08-25 14:56 ` Salil Mehta
[not found] ` <d71edae9-805a-2000-9afa-7e8002bc498a-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-09-05 12:53 ` Salil Mehta
2016-09-05 19:41 ` David Miller
[not found] ` <20160824.215341.1803699371957253329.davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>
2016-08-25 12:00 ` Salil Mehta
2016-08-25 13:52 ` Doug Ledford
[not found] ` <8fa4e921-9dfc-bf2b-32c9-230136536f65-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-08-25 14:50 ` Salil Mehta
2016-08-25 15:00 ` Doug Ledford
2016-08-25 15:34 ` Salil Mehta
2016-09-05 10:13 ` Salil Mehta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160824135929.GU15065@leon.nu \
--to=leon@kernel.org \
--cc=davem@davemloft.net \
--cc=dledford@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=mehta.salil.lnk@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=oulijun@huawei.com \
--cc=salil.mehta@huawei.com \
--cc=xavier.huwei@huawei.com \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).