From: Pavel Machek <pavel@ucw.cz>
To: kernel list <linux-kernel@vger.kernel.org>,
jeffrey.t.kirsher@intel.com, intel-wired-lan@lists.osuosl.org,
netdev@vger.kernel.org
Subject: e1000e on Thinkpad x60: gigabit not available due to "SmartSpeed"
Date: Thu, 1 Sep 2016 22:14:27 +0200 [thread overview]
Message-ID: <20160901201408.GA5061@amd> (raw)
Hi!
I have trouble getting 1000mbit out of my ethernet card.
I tried direct connection between two PCs with different cables, and
no luck.
Today I tried connection to 1000mbit switch, and no luck, either. (Two
cables, one was cat6, both short).
My computer sees 1000mbit being advertised by the other side, but does
not advertise 1000mbit, "Link Speed was downgraded by SmartSpeed".
4.8.0-rc4+ kernel.
Does it work for other people? Card is:
02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet
Controller
root@duo:/data/l/linux# mii-tool -v eth1
SIOCGMIIREG on eth1 failed: Input/output error
SIOCGMIIREG on eth1 failed: Input/output error
eth1: negotiated 100baseTx-FD, link ok
product info: Yukon-EC 88E1111 rev 0
basic mode: autonegotiation enabled
basic status: autonegotiation complete, link ok
capabilities: 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
link partner: 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
root@duo:/data/l/linux#
[ 1330.622658] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow
Control: None
[ 1330.622840] e1000e 0000:02:00.0 eth1: Link Speed was downgraded by
SmartSpeed
[ 1330.622846] e1000e 0000:02:00.0 eth1: 10/100 speed: disabling TSO
root@duo:/data/l/linux#
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
next reply other threads:[~2016-09-01 20:14 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-01 20:14 Pavel Machek [this message]
2016-09-01 21:58 ` e1000e on Thinkpad x60: gigabit not available due to "SmartSpeed" Greg
2016-09-02 16:57 ` Lennart Sorensen
2016-12-05 10:44 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160901201408.GA5061@amd \
--to=pavel@ucw.cz \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=jeffrey.t.kirsher@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).